from the video, that chopper had a rough time taking off. could it be that the pilot ignored the signs?

I just made this tutorial/post on How to make your own RF Home Automated System. The full code is available HERE while the full post and details is available HERE.


For more post and tutorials like these, join the facebook group and share your own ideas while interacting.

I just made this tutorial/post on How to make your own Baby monitor device with Raspberry Pi. The full code is available HERE while the full post and details is available HERE.


For more post and tutorials like these, join the facebook group and share your own ideas while interacting.

This is the mobile power module Accessories, 18650 Charger Circuit board shell which you can use as a power bank. Read more about this product: Dual USB 18650 Battery Charger PCB Power Module 5V Module Board

Contact us for more details: 08139059856

Just came in, very cheap and plus free shipping. Read more about this module.


12 digital input / output port D2 to D13
8 analog inputs A0 ~ A7
1 pairs TTL level serial transceiver port RX / TX
6 PWM port , D3 , D5, D6, D9 , D10 , D11
Atmel ATmega328P – AU MCU
USB download and power
Support the external 5V … 12V DC power supply
To support 9V battery powered
support ISP download





Contact us for this module:
phone/whatsapp: 08139059856
email: sales@steinacoz.com

New Arduino Nano V3 expansion module. Your projects can now be very portable. You can also enjoy the free shipping that comes with this module.
Read more about this module

Contact us for more details: 08139059856
Visit us

Just came in, very cheap and plus free shipping. Read more about this module.


12 digital input / output port D2 to D13
8 analog inputs A0 ~ A7
1 pairs TTL level serial transceiver port RX / TX
6 PWM port , D3 , D5, D6, D9 , D10 , D11
Atmel ATmega328P – AU MCU
USB download and power
Support the external 5V … 12V DC power supply
To support 9V battery powered
support ISP download





Contact us for this module:
phone/whatsapp: 08139059856
email: sales@steinacoz.com

Just came in, very cheap and plus free shipping. Read more about this module.

The NodeMCU is an open-source firmware and development kit that helps you to prototype your IoT product within a few Lua script lines.

Features:

Open-source

Interactive
Programmable
Low cost
Simple
Smart
WI-FI enabled




Contact us for this module:
phone/whatsapp: 08139059856
email: sales@steinacoz.com

Just came in, very cheap and plus free shipping. Read more about this module.

The NodeMCU is an open-source firmware and development kit that helps you to prototype your IoT product within a few Lua script lines.

Features:

Open-source

Interactive
Programmable
Low cost
Simple
Smart
WI-FI enabled




Contact us for this module:
phone/whatsapp: 08139059856
email: sales@steinacoz.com

I just made this tutorial/post on How to create Prototype/Dummy Home Automation System using Raspberry Pi, Pubnub. The full code is avaliable HERE while the full post and details is available HERE.


https://www.youtube.com/watch?v=XX4s1Y2pJHg

For more post and tutorials like these, join the facebook group and share your own ideas while interacting.

taofeeq137:
Hello, please, where can I learn to program for arduino, i would like to create an interface where a LED screen is used to display options which can be selectd with a couple of buttons.

Note: I am completely new to arduino, the only programming language I know fairly well is C#

I once saw someone coding for raspberry pi and the declarations, functions and operations looked similar to what C# uses, so I think I can learn it fast

Sorry for late reply, you can follow our blog for such tutorials on Arduino and Raspberry Pi pins can be controlled using a number of languages including JS and PHP.
You can drop your email address so I can drop a textbook to help you but you ve to know alittle about C language for arduino

Waste of world cup

Dis saudia tinks is street footbal

I just made this tutorial on how to Write and retrieve passkey from Arduino EEPROM using keypad, you can use this inform of access control. The full code is avaliable HERE while the full post and details is available HERE.

For more post and tutorials like these, join the facebook group and share your own ideas while interacting.

I just made this tutorial on how to create your own simple Lithium Battery level indicator with Arduino and interface with LCD. The full code is avaliable HERE while the full post and details is available HERE.

For more post and tutorials like these, join the facebook group and share your own ideas while interacting.

ugwum007:
You are all invited to join this group on Facebook: Raspberry Pi, Arduino, IOT and Embedded in Nigeria. This group is for topics relating to arduino, raspberry pi, iot, embedded tech and anything you are working. It is also a platform where embedded freaks in Nigeria can share ideas, showcase projects and source for materials. Lets build a community together.

LINK: https://web./217440152191940/?ref=group_header

The facebook group is quite growing. Join so we can share knowledge, experience and advance our technology.

ugwum007:
You are all invited to join this group on Facebook: Raspberry Pi, Arduino, IOT and Embedded in Nigeria. This group is for topics relating to arduino, raspberry pi, iot, embedded tech and anything you are working. It is also a platform where embedded freaks in Nigeria can share ideas, showcase projects and source for materials. Lets build a community together.

LINK: https://web./217440152191940/?ref=group_header

The facebook group is quite growing. Join so we can share knowledge, experience and advance our technology.

ugwum007:
You are all invited to join this group on Facebook: Raspberry Pi, Arduino, IOT and Embedded in Nigeria. This group is for topics relating to arduino, raspberry pi, iot, embedded tech and anything you are working. It is also a platform where embedded freaks in Nigeria can share ideas, showcase projects and source for materials. Lets build a community together.

LINK: https://web./217440152191940/?ref=group_header

The facebook group is quite growing. Join so we can share knowledge, experience and advance our technology.

You are all invited to join this group on Facebook: Raspberry Pi, Arduino, IOT and Embedded in Nigeria. This group is for topics relating to arduino, raspberry pi, iot, embedded tech and anything you are working. It is also a platform where embedded freaks in Nigeria can share ideas, showcase projects and source for materials. Lets build a community together.

LINK: https://web./217440152191940/?ref=group_header

You are all invited to join this group on Facebook: Raspberry Pi, Arduino, IOT and Embedded in Nigeria. This group is for topics relating to arduino, raspberry pi, iot, embedded tech and anything you are working. It is also a platform where embedded freaks in Nigeria can share ideas, showcase projects and source for materials. Lets build a community together.

LINK: https://web./217440152191940/?ref=group_header

You are all invited to join this group on Facebook: Raspberry Pi, Arduino, IOT and Embedded in Nigeria. This group is for topics relating to arduino, raspberry pi, iot, embedded tech and anything you are working. It is also a platform where embedded freaks in Nigeria can share ideas, showcase projects and source for materials. Lets build a community together.

LINK: https://web./217440152191940/?ref=group_header

Since you have access to internet Why don't I get you check out pubnub

We just made a new tutorial on remotely controlling a servo motor connected to raspberry pi from an Ionic Android app using Pubnub.

PubNub is a global Data Stream Network (DSN) and realtime infrastructure-as-a-service (IaaS) company based in San Francisco, California. The company makes products for software and hardware developers to build realtime web, mobile, and Internet of Things(IoT) applications.

PubNub’s primary product is a realtime publish/subscribe messaging API built on their global data stream network which is made up of a replicated network of at least 14 data centers located in North America, South America, Europe, and Asia. The network currently serves over 300 million devices and streams more than 750 billion messages per month. Pubnub is a very integral part of this project.

Ionic is a complete open-source SDK for hybrid mobile app development. The original version was released in 2013 and built on top of AngularJS and Apache Cordova. The more recent releases, known as Ionic 3 or simply “Ionic”, are built on Angular.

The full codes and details are available here and the components are all available at steinacoz store


Introducing Steinacoz Platform/Store, the new online store for electronics, robotics & internet of things components. We also offers tutorials and guides through our blog.

Steinacoz also offers help to students, firms and hobbyists on their projects and our components are usually original and affordable.

You can get yout:
Raspberry Pi module
Raspberry Pi components
Arduino boards
Sensors, etc

Check us out today at STEINACOZ STORES

Damgud:
Do you have an esp 01 adapter that can be used for esp8266 contact 07062402310

morning, esp 01 adapter is currently under restocking

https://www.youtube.com/watch?v=isUbwTJrDnA

https://www.youtube.com/watch?v=IO5XryPEGYY

https://www.youtube.com/watch?v=NXCwBybVrgE


Full post: FC-28 Soil mositure Sensor with Arduino and Buzzer

https://www.youtube.com/watch?v=4UC_DScWz54


Arduino Blinking LED with Visuino

Introducing Steinacoz Platform/Store, the new online store for electronics, robotics & internet of things components. We also offers tutorials and guides through our blog.

Steinacoz also offers help to students, firms and hobbyists on their projects and our components are usually original and affordable.

You can get yout:
Raspberry Pi module
Raspberry Pi components
Arduino boards
Sensors, etc

Check us out today at STEINACOZ STORES

No keyboard, no Monitor or Ethernet: Don't worry, we got you covered and this is meant for you:

NOTE: THe full post with images and illustrations can be found HERE.

You just purchased your new Raspberry pi 3 model B from Steinacoz Store and found out you will need a keyboard, Ethernet to connect to internet and monitor. That should be frustrating but don’t get frustrated, this post have everything covered.


You should know that the easiest and fastest way to setup your Raspberry Pi is to download NOOBS (new out of the box software), plug in the monitors, Ethernet and keyboard and get started.

In this post, we have to pick first pick up our operating system from Raspberry.org/downloads. Download Raspbian Stretch which should be the latest. Here is a list of things to download:

- Raspbian Stretch
- SD card formatter
- Angry IP Scanner
- Rufus
- Putty or PyCharm

You might be wondering why PyCharm, it happens that PyChar does ship with SSH client, go to tools, you will find it there.

Insert your memory card into an adapter and format it using the SD card formatter, open Rufus and burn the Raspbien image into the SD card.

In these tutorial, we are going to implement a small system that beeps alarm/buzzer on detecting motion within its range. Almost all the materials for this project can be gotten from our store, here is the list:

- Arduino mega
- PIR sensor (x2)
- LED (x2)
- Piezo buzzer
- Dupont cables
- Prototype board
- Arduino IDE
- GSM module

We will be assuming that the PIR sensors will be placed at different locations or facing different directions. Connect the VCC of the PIR sensors to the 5volts pin of the Arduino, the out pin of the PIR sensors to pin 2 and 3 of the Arduino respectively and the GND to the GND of the Arduino. The LEDs should be connected to pins 13 and 12 of the Arduino respectively. The piezo buzzer goes into pin 10 of the Arduino. Finally, the GSM module RXD pin connected to Arduino TXD pin (GSM module not really included).

The full details and code for this post cna be found here.

https://www.youtube.com/watch?v=BO_UdtURNBc

In this tutorial, I will show you how to play sound tone using Arduino and NodeJS. This post will be part of the tutorial series on Javascript in Embedded electronics.

With the tremedous rise of javascript and nodejs, it wasn’t a surprise seeing it heading into the world of electronics and IOT.

Lets make sure you have got all we need to accomplish this task, you can  get them from our store but the links to the individual components is attached to it:

- Arduino board (I am making use of Arduino Mega but Uno will still serve)
- Arduino IDE (You can download it here if you have not)
- Push button
- Piezo-buzzer
- NodeJS (You can download yours from here)
- Johnny-five (a JavaScript Robotics programming framework. Johnny-Five is open source and has growing developer communities. It can be install using the npm package manager).

The full detailed post and complete code is contained here.