₦airaland Forum

helow hi bye bye, the wing spand is too short, it can fly, no prop nor motor, i thing is fance just for beautofication, he is a nice artist not every body can do that, guys any little knowledge just appreciate it better more is stilll to come, he is a good desgner .

any question

rc plane respond mainly on 4 kind of force, this force help them in many way, xaerodynamic force they are 1. Lift, 2. Thrust, 3. Gravity or weight, 4. Drag, in one word they are calll xaerodynamic force that guard a plane.

how it move, u must lern the movement of an rc plane, chennel 1 elevator ch2 alieron ch3 throttle ch4 rudder, in other way round (ch1 pitch) (ch2 roll) (ch3 thrust) (ch4 yaw).

some will be asking how will i fly this if i finish it? Here is some tip on how to fly plane,
Best airplane for a beginner is
High wing trainers
Learn how to
Fly, by victor can fly,

How plane turn
Ailerons control the roll of the plane about it's longitudinal axis;
Left + up / right + down causes the plane to roll left and right
right + up/ left + down make plane to roll right
If plane have no rudder , left or right + up banked turn
FMS simulator. Can also help is cheap.

learning to fly rc plane is best done on a trainer airplane.. These are planes that have a certain built-in design characteristics to make them nice and stable in the air.
The biggest giveaway is the fuselage. If the wing sits on top of the fuselage then there,s a good chance that the plane is indeed a trainer, like this one i build is a trainer,
Another is using alieron and rudder to make a banking ture easy i just lern that e.g right alieron + left rudder and left alieron + right rudder.

how much?

can it be use for a quadcopter?

is it by avr porket programmer? I want to lern that, so that i can make quadcopter with uno board and mpu6050 sensor. Thanks

wing

note: all ur prop's should not move the same direction, from up clock wise directio and down anticlock wise directio.

cheak out this vedios, VEDIO OF QUAD...

make a test flight by using 24v or 18v led acid battery, dont forget balancing all the prop's and the cg.

now test the hole motors.

now sketch on a pc, start assembling.

let make the props, i use aluminum is the space provided.

use thesame method, of motor set, ur frame should be light, u may use a foam board it is lighter.

make a frame of 6cm -3

do u want to make a quadcopter fly without any parts or electronics. follow this steps, hey there am using whatapp 09032292949 facebook me on igwevictor.

have a nice flight.

diagram of quadcopter, dont forget to balabce ur prop's and the cg.

dont forget that this is brushed and gaerd quard, add a bearing in a tube and gum it to the motor body with eposy, add same gear to all motors, my motor here is 8v.

electronic

tx rx, and programe ur quad.

my mosfet flight controller using pic12f ic

i made my prop with wood.

you has made a quadcopter frame.

need ur comments

now u add some aluminum shit on it make a design hole on it and install it by using eposy and small nail, and ur frame is done next is to add ur parts..

Making 2: mersure a garp of 5cm in each and join them together, they must be equal.

Next is how to make a quadcopter using wood or popsicle to build this, is all about technology, lern how to build copter's.
Making 1: i use a wood in makeing this, cut a tarod wood in a pen four squear shape of 6cm and 12 cm, or chose the size of quad u want.

next is how to make a quadcopter . Step1: wood or popsicle, is all about technology, lern how to build copter's.

Making 1, i use a wood in makeing this, cut a tarod wood in a pen four squear 6cm and 12 cm .