₦airaland Forum

how to add ailerons servo, I put them close to each other and keep there flap opposite.

Do so on elevator .

Before hooking.

the rod is bend in a ''V'' shape C o n n e c t .

tiny rod.

...........

Here I first install servo on rudder before the elevator, they are the drag force, u must study it very well.

How to install servo on your plane, here am using 4 pec of servo 2 for ailerons 1 for rudder and 1 for elevator, some people love to use 2 through out.

Yemmyteespeed007:
very usefull diy project. how effective is it

Sucking out the dust particles on the carpet, rug, and floor or ty's etc

any more innovation I will let u know, but ask question concerning this??

Now you are done use a marker to right what u want on it .

victorigwe:
Make a hole on the upper body were u can house ur host or pipe a cover it.

And cover

Make a hole on the upper body were u can house ur host or pipe a cover it .

make sure that the air is flowing upward direction.

add the motor one it, as I say earlier u can add another motor for more power.

step 3 the cover:
Cut the cover with the measurement of the motor make sure that it is equal, and add a mini net on it so that sand will no penetrate and the will be no lacking of air in the side, use eposy.

Chief101:
The video is not downloading

That's the problem ok u know what chart me on whatapp it will be better there 09032292949

Get your motor; here am using 12v dc 2.3a upward amp fan air in conditional motor for inverter or mixers amp's, etc, make sure the amp's is ok , it required optional I mean u can add another motor ontop.

step1 : buy a small bockate.
About 150N is what I both it.

here is some VEDIO on how it work,
It is about sucking dirt out of the ground or rug.

cuedish:
wherizit?

Some image problem , am coming

Helow every one, some of you may know me, i was thingking;;;, sweeping our rug cause blockage of nose or kataa, so this mean of vacuum cleaner was discovered, for cleaning your rug without have any block nose or kataa, following this step's you will lean it, u can also use it for cleaning you floor.

still on order from aliexpress.com but I use mosfet homemade electronics esc to test it.
If there is any innovation I will let u know

still to order but from aliexpress.com but I use mosfet homemade electronics esc to test it.

Waw I enjoy this @sunday idajili nice.

image problem...

cool

note: in the shaft untop of the body glue it, to make it stroung, it will move with the body.

cover the cup, i call it cup, you are done with it, i mean finish, so add some thing in the under shaft so that it cant run out when turning.

ogocology:
You can get all you need on www.hobbyking.com or aliexpress.
Brushless motors are better for RC planes and helix though.

OGocology is right buy from there, hub360.com.ng is nigeria hubby shop oshudi lagos.

the pwm is a servo tester homemade, here is the circuit, so buy esc and built pwm, u will have a flying result...

i all so use brushe to build mine, add swashplante home made and buy brushed esc in aliExpress.com 12a and i made a pwm signal output to throttle the esc i both and they creat a lift fast, i added it a long wire about 7-8 metre long i use it to fly heli manually or analoglly.