₦airaland Forum

here.

here

Take the ameture that you coil, add it on the bearing, or sit it upon and glue it with eposy, make sure u did not glue the turning poin on the bearing, wait for 4 min for it to get strong then you are done with this.

add wires in ur output.

The stand, there is an aluminum ball on it, on top of it add bearing and gluw it so that it will not be tiling left and light, the bearing help to hole it straight without turening.

install and cheak.

i cut it close to the margnet.

i remove the nob.

but am coiling with 10 , thats the problem, its simple the -1 in it that make it 10 coill it with 9 together and use white wire to identifile it, it will be ur signal and the ress is posetive and negetive any one can serve.

note: the body must not tuch the copper use white tape to demacate them, if u dont understamd the diagram, it's say's that copper wire will run round the ameture and tuch the brother in to 3 axies, and u will have 3 output.
Note: some brushless are base on 3, 6, 9,12,15,18 coiling connection etc, if u are coiling 3 that diagram is okay, remeber count you turing, if u are coiling 6 up and down faceing each other like + cross and the side and the opposite side , just like this star *, if u are coiling 9 it will be 3 3 3 etc

then recoil it .

Remove all the coill's and drill the hole so that the shaft will be moving freelly.

open it

step1; motor

EbukaHades10:
I'm not understanding. Should we roast egg?

Topic change see my profile about the heli, thank you bro.

thanks.

Javen:
Pls where can I buy the tx and rx for rc car in lagos

Hi bro buy from www.aliExpress.com online market on china. Or www.hub360.com.ng is nigerian.

modik:
It works everywhere.
Provided you have a Google account. Or Gmail. Follow the itemised steps.

But i haven't creat channel how can i add video on it, i open utube account i did not see attach i only see upload vedio and video can upload, some one told me that it can only be done on pc..

modik:
1. Log on to your Google account
2. Open www.youtube.com
3. You would see this icon (see attached)
4. Click it and locate the video as you follow instructions. 5. End.

Thanks bro, is it on a computer or android? am using symbia phone

modik:
All hail Land of ingenuity and of the Rising Sun.


Thumbs up bro.

The video isn't loading. Please upload to YouTube and share link here.

I dont have youtube nor know hw to upload video, am not that computer wizzard or God

i will creat more video soon,

bia VIDEOS

car, some videos are lost from my other phone, i have sold some and destroy some.

my home made rc car

bia air engr

Thanks bro.

.

some defrent design.

step2 paint it and start assembling the parts.

step 1 is buy a pop stick it cheap in aliexpress, make a shape and a nice design, using an eposy still gum A B 4min,

Next is a popsicle drone i made that fly up to 200metre high, gather your pop wood and start with this simple step's