₦airaland Forum

nice flight.

prototype arduino

i made the arduino prototype, so i want to use the usbasp uart ttl to program it, and avr to domp the bootloader? Ples do u know how to bootload the atmeger328 with avr pocket programmer?

It just a simple project, get a square paper and make a normal plane u use to make when u were a kid, cut the nose a little and house the mini motor, fine ur cg {centre of gravity} place the battery on the cg, the Bluetooth model is for charging the battery, place a broom stick on the two wing so that it will not bend, also on the top to hold it, place a mini switch on it, and go for a test flight.

it just simple, get a square paper and make a normal plane u use to make when u were a kid, cut the nose a little and house the mini motor, fine ur cg {centre of gravity} place the battery on the cg, the Bluetooth model is for charging the battery, place a broom stick on the two wing so that it will not bend, also on the top to hold it, place a mini switch on it, and go for a test flight.

thank u guys, i really appreciate, wow!!

materia's,
* A4 paper size or legal.
* Bluetooth battery.
* Bluetooth controller for charging.
* vibration motor (phone motor)
and eposy gum.
* mini toy heli prop

i taught of how to make my little sis a toy to play with. I figure a way to make a paper to fly. This is free flight every one can make, i made it and it work. It fly up for about 10 metres and fly time is 4 or 5 minutes.

help

!!!

I download the ide software to my pc, but I don't know how to operate the tools,
In pic I download the MP-lab but I don't know the tools function and how to dump my code?.

hi am a boy of my dream , is true that intelligence Is not knowledge but imagination, I have uno and pic I don't know how to program them I need help.

thank you

ViDEOs

step 11 test
I test it with 30a esc my motor is 1000kv .
When testing first plue ur esc to motor and esc to servo test were u can throttle it, then fix the battery make sure that the servo test is not in the middle pleas it will be at 0, wait for the beep sound to finish then u start throttling. Waw the speed is amazing ...........

step 10 making sure the body are not tuching the amiture. U are good to go.

step 9 cover it and add some thing at the end shaft not to fall of when spinning.

step 8: glue back the brushless I replace the shaft to be long, I glue it back with Eposy gum.

step 7 : install it
Install it under the amiture, the motor have long not loss it and tighte it when u have install the aluminum stand hold .

step 5; stand holder
I carve aluminum in a round shape, having cross on there side were u can house ur nuts.

step 4: solder wire
Solder wire on it, each represent something, A B C A is airmitter b base c collector, A and C is ur +& - b is ur signal , but don't be confuse any one can serve as abc.

my is 47 turn calculate it by the amiture.
note: who ever that is making this project is on risk, u have to be cearfull when test.
Note: this project will save ur money and it can fly any kind of robot u made with it.

step 3: coilling get the thick copper wire and recoil it this way in the image show .

step 1 romov the coil
I remove the previous coil and replace it with a thicker one, buy a now copper coil in the market.

I got this motor from a vedio shop lie in helplessly on the group, I open it and remove the circuit in it, behold the amiture is 24 but it was flat, I remove the coil on it.

Hi! I will be telling you how to make ur own diy brushless motor it simple, u see here in nigeria brushless motor cost up 4600naira, and I u want to make rc helicopter or quadcopter even plane, and u need and adjustment for ur money , here is a way out , making any kv on ur own following the prosidior or steps u will lern how to make you own.

that one na nairaland problem not my forth ..

the plane land it self when battery low, sorry I don't no what to do it, it will not save ur battery, just add ur battery to 9v battery before charging or put it in refrigerators, only if ur battery discharged and die, rise it with this method.

I hope this innovate ur mind and ur knowledge over radio control model, you can now be able to build real rc plane using this step. Thank for your precious time.

6 minutes flight time, don't over charge ur battery to 4.2v save ur battery .

flight test

ready to fly..................................................................................................................................................................................................................................................................................................

ssvm saint smart victor man Igwe .