₦airaland Forum

WeldHome:
Got another charger and it's charging my laptop now. Is inverter power by any means bad for laptop charging? I asked because I've used that charge for years only for it to get bad on 1 and half month of use on inverter..

BTW, a big thanks to you and shawlxAk for your help. God bless..

my dear I haven't used it b4. maybe u should ask ur dealer.

ben1daEbiri:
dish,pls take it from different angles

I will do that tomorrow please.

WeldHome:
Yes, the voltage is fluctuating, which surprises (thought it was only alternating current that fluctuates). Couldn't find another charger so I will go to computer village to look for it, but on the condition that it charges my laptop before I buy it. If it doesn't charge then I go to an Engineer to help me fix it.

Thank you so much sir.

sth is wrong with the charger if it fluctuates current. please do not plug it in our PC again, because u might need Fire Service to put-out the outcome.
try and get another charger with the same DC range and report back like u said.

ben1daEbiri:
can pls upload pictures?

picture of dish or MBC chennel?

WeldHome:
Voltage of 18.5 but I tested the charger with a voltmeter and it gives me voltages between 16.0-17.9v. Is the actual voltage supposed to be lower than the charger rating?


Thanks..

does the voltage fluctuate?
is goes up and comes down unstoppable?
meanwhile try another charger of ur prescribed pc voltage.

roogee:
Wat was ur dish size?

90cm Enugu

WeldHome:
I used it till 10pm yesterday..

what's ur PC DC rating?

u need to see an EXPERIENCED engineer to check on ur board. anyway, when last did u use d PC b4 this morning?

finally nailed MBC. my wire was faulty even though it tracked other sat. take note dudes VIVA FTA!!!

bishop4life:
My pleasure. Please I forgot to mention that if the tp(frequency or symbol rate) is invalid, the signal strength won't come up. This happens mostly if you input ku band tp on satellite meant for c band. For example, inputting emmanuel tv tp for intelsat20ku on intelsat20c on your strong decoder. I hope you understand what I mean.

is MBC not Ku band? the only thing that confuses me is that I used the same dish to nail 5°E.

thank you dear.

bishop4life:
Check your lnb

this same lnb tracked multi TV , ses 5. the dish itself I'm using it on ses 5

Akinolasegun21:
check ur lnb and ur cable very well something is wrong with them.

but the same cable and lnb tracked see 5°E

I used the same lnb to nail 5°e this evening

clemo4u:
i tracked mbc with dstv 90cm in ahoada west rivers state

I tried MBC 7w again today. didn't hit green I used that tp 11474/11476 V 27500. look at d picture bellow, while I was spinning my dish the 1st bar didn't even get up to 80% not to talk of the 2nd one. the both remained like. that till the sun suck the hell outta me.
I don't know if the problem is from my decoder? I use SRT 4669Z.

try this
before u confirm sending an item from ur phone, go to the task bar and double-click on the Bluetooth icon, click on receive file from the pop-up. then go ahead and confirm sending from ur fone to PC. thank u

Muhammed665:
Try this.
Astra 1G
11293 H 45000

what interesting do they have?
and dish size?

sameolg616:
did u send me a mail here?really i dont know how it works cuz i never can read it....you can reach me on phone faster

OK your contact?
mine: 08088481722

purityval:
Good day people. Please I need someone to help me. The screen of my hp pavilion dm4 just cracked and the whole screen went blur. Please how do i go about repairing it. Can it even be repaired?

Please i need help urgently.

I never have seen sth like that repaired. we normally replace .

agoro2u:
same here. cant get green.

I think they are yet to come stable.
like I said. I hit green before but it just gone while cine afric and co are still on

Gr8men:
Good evening house, pls which TP can i use to nail thunder tv & max tv on multi tv position. I've tried 11596 v 30000 but couldn't get them. I am using SRT 4922. Thks in advance.

I don't have light now. just blind scan

blessingsat:
Metro tv,crystal plus,crystal extra,crystal prime, GTV live new addition to multi tv 12575V10999 #enjoy

I blind scanned and got those channels. that day it was 62% poor signal. before I knew it, it went down to RED ZONE meanwhile Cine plus and co was normal. did u experience the same?

shawlxAk:
Is there another account on the computer having admin privileges?

Negative

messidee:
Don't know how to. Once I press the power button, the next step is the password entry.

meet a guy who's quite handy with laptops. ie if you don't wanna see an engineer yet.

messidee:
Don't know how to. Once I press the power button, the next step is the password entry.

meet a guy who's quite handy with laptops ie . If u don't wanna see an engineer yet.

unclephilio123:
Greetings to all d gurus in d house for wonderful works u guys are doing.I'm a newbie n novince abt installation of dish n tracking of frequencies.Just need step by step tutor on how to nail my dish myself.There is dis installer I'm using alwayz anything happen to my dish,and he wil re-install for me n collect my money while going,whch I now noticed dat he is intentionally doing dat so to extort me.But aving qurelled him,he didnt cum to me anymore.my dish was brought down as a result of heavy downpour last nyt.Plz gurus kindly help me wit step by step on how to nail d frequncy aside multitv n mytv africa.waiting for u guyz.the frequncy of Faaji tv bfore

did you plead with him to stop extorting from you?

have you tried SAFE-MODE?

kobendy:
Thanks guy,but the situation still remain the same o.

try and reformat If know how to. Or see and engineer.

ugotuf:
Sorry about the sun burn. MBC package is always online 247, you may hit green with 11595 but any quality below 62% will only give you 2M and the rest and not MBC. Skew your LNBF @ 9 o'clock and tweak more till you get 63 and above. I tweaked for days to hit 67%.

look at the situation of this dish does affect tracking MBC? I tried again today to no avail.

can it

can this rusting affect my tracking house?

anyway try removing the charger and battery and leave the PC for about an hour or two. then fi the battery back, power on ,reboot and see what happens
report here.