Description:
Car Tyre Pump

Description

3m power lead with cigarette lighter plug

1m detachable (screw on) rubber air hose

Metal valve fitting (screw on)

In-line pressure gauge

On/off switch

Three inflation adaptors stored in a Velcro pouch

Anti-vibration rubber feet

Carry handle



Specifications:

Voltage: DC 12V- 13.5V

Current Consumption : 10 amps

Flow Rate: 35 L/min (without loading)

Maximum pressure 100PSI


How to Use


1. To achieve optimal performance when operating the air compressor, your vehicle’s engine should be running

2. Plug the compressor’s power cord into the cigarette lighter socket or the battery of your vehicle. Screw the air hose‘s brass valve tip directly onto the tyre’s air valve.

3. Turn the compressor ON - begin to inflate the tyre

4. When pressure gauge reaches the desired pressure (normal tyre pressure is 28-35psi), switch the unit OFF and remove the air hose from the valve.



Precautions on use:

1. Allow sufficient cooling time before storing

2. No oiling is required as all parts are lifetime lubricated

3. To avoid exhausting the car battery, please have the engine running while using the air compressor

4. Please ensure that the power switch is in the OFF position when not in use



For All Other Inflatable Objects Including Bicycles tyres, Rafts, Air Beds, and Sport Balls:

1. Start your vehicle‘s engine, then plug the compressor‘s power cord into the cigarette lighter or the battery

2. Nozzles are provided to fit the inflatable objects. Simply screw the appropriate nozzle into the brass tip of the air hose.

3. Attach the appropriate nozzle to the inflatable object and turn the compressor on. Turn the compressor off when the object is inflated to the desired firmness or pressure.


Automatic Electric Jack and Wheel Spanner

Description:

Effortlessly change a tyre and quickly get back on the road

Raises a car at the touch of a button

Two -tons lift capability, suitable for cars and light vans

Supplied with a carry case, hand gloves, wheel chock, battery clamp, extension cable, & screw driver.

Durable metal finish

Can use the manual hand crank to lower or raise the car if there is no power when the car is jacked.

The saddle is made of high strength material, tough and anti-slip that protects the car from damaging

Fused for overload protection

Automatically limits the highest or the lowest height

Specially suitable for women, fat and tall people


Specifications


12V Electric Car Jack & Wrench
Model: JW-20A

Capacity: 2 Ton

Voltage: 12V

Maximum current: 10A

Rated Power: 150W

Jacking height: 12-35cm

Control cable: 4.5M



How to use :

1) Plug the jack to the 12 volt socket provided in the car
2) Place the jack under the car, where the car jack is to be mounted (please check the car manual for the exact place for placing the car jack)
3) Switch on the car
4) Start the UP button for increasing the height
5) After the sufficient height is achieved, remove the tyre
6) Replace the tyre with the new one

7) Use the LOWER ARROW button to reduce the car height
Let the jack get unscrewed, till it stops rotating and stops automatically
9) Unplug jack from 12 volts car plug from the car


Precautions on use:


1. Start the engine before operating the impact wrench

2. Do not use the impact wrench continuously for more than 10 minutes

3. Ensure that the correct socket is attached to the wrench head when loosening the wheel nuts

4. Do not over tighten the wheel nuts

5. Always keep the children away from the working area

To ORDER CALL 08023802511 ,08187116662 OR EMAIL basseycecil@gmail.com