Oil and gas training for those who wish to build/develop their career with the latest tools in the production, exploration and processing of crude oil and petro-chemical products. This training exposes you to techniques and standards of different layout. We also engage you with some past projects of some oil fore-runners and how to handle various task involved. Job seekers are provided with up-to-date information on how to build a productive career relevant in the present day O& G industry. This training also exposes trainee on understanding and interpretation of various flow diagrams such as P&ID, PFD, UFD which are useful to both operators on site and various technicians at construction and fabrication stages.
COURSES ON TRAINING
AutoCAD general(a software for all class of engineers ,technologists and scientist)
AutoCAD P&ID
AutoCAD Plant
PDMS (used by mechanical engineers, piping and layout engineers, structural and civil engineers etc)
Aspen-Hysys (used by process engineers, chemical engineers, petroleum engineers, industrial chemist etc)
Petrel (used mostly by petroleum and gas engineers ,geologist, geo-physicst etc)

1.AUTOCAD
Introduction to the use of AutoCAD 2D commands
Application in designing of a simple house plan.
Application in electrical surface design and electronic circuit
Simple 2D piping design.
Piping and instrumentation (p&ID) design modeling and piping isometrics
General hatching and gradient modeling.
Introduction to 3D design modeling.
Development of 3D house plan model and roofing.
Introduction to 3D piping modeling
Modelling of mechanical parts and components.
Rendering and material modeling

2. PDMS (Plant Design Management system)
Introduction to different modules of PDMS
Application of design module
Structural design of beams/column ,walls/floor, panels/plates and access, stairs and ladder modeler.
Equipment application ranging from pumps, distillation columns, storage vessels, exchangers etc
Pipework routing
HVAC design modeling, Cable tray ,hangers and supports
Converting PDMS Draft and Isodraft to AUTOCAD
Introduction to PDMS project designed to various standards and layout interpretation.

3. OIL AND GAS PROCESSING DESIGN USING ASPEN HYSYS.
Introduction to process engineering and application
Flash calculation and utilities.
Propane Refrigeration loop
Refrigerated Gas Plant
NGL Fractionation Train
Oil Characterization
Gas Gathering
Two-Stage Compression
Acid Gas Sweetening with DEA
Natural Gas Dehydration with TEG
Reporting in Aspen HYSYS

4. Petrel (for sub-surface reservoir modeling and simulation studies).
Introduction and data importation
Seismic interpretation
Fault modeling
Vertical layering
Facies modeling
Petro-physical modeling
Reservoir mapping
Well correlation

Date: 2 April-16 April,2013
Venue: ST’ paul executive services limited.
Address: 44, Awolowo way, ikeja,opposite Eko bank.
Phone number: +2348083631156 , +2348033016880
Email: cockeep46@yahoo.co.uk
Website: www.stpaul.esl.com
Booking for the courses and enquires starts on 20th march-1st of April 2013.Discount for early birds, limited seats available. Our weekend classes holds on Saturday and Sundays.

Oil and gas training for those who wish to build/develop their career with the latest tools in the production, exploration and processing of crude oil and petro-chemical products. This training exposes you to techniques and standards of different layout. We also engage you with some past projects of some oil fore-runners and how to handle various task involved. Job seekers are provided with up-to-date information on how to build a productive career relevant in the present day O& G industry. This training also exposes trainee on understanding and interpretation of various flow diagrams such as P&ID, PFD, UFD which are useful to both operators on site and various technicians at construction and fabrication stages.
COURSES ON TRAINING
AutoCAD general(a software for all class of engineers ,technologists and scientist)
AutoCAD P&ID
AutoCAD Plant
PDMS (used by mechanical engineers, piping and layout engineers, structural and civil engineers etc)
Aspen-Hysys (used by process engineers, chemical engineers, petroleum engineers, industrial chemist etc)
Petrel (used mostly by petroleum and gas engineers ,geologist, geo-physicst etc)

1.AUTOCAD
Introduction to the use of AutoCAD 2D commands
Application in designing of a simple house plan.
Application in electrical surface design and electronic circuit
Simple 2D piping design.
Piping and instrumentation (p&ID) design modeling and piping isometrics
General hatching and gradient modeling.
Introduction to 3D design modeling.
Development of 3D house plan model and roofing.
Introduction to 3D piping modeling
Modelling of mechanical parts and components.
Rendering and material modeling

2. PDMS (Plant Design Management system)
Introduction to different modules of PDMS
Application of design module
Structural design of beams/column ,walls/floor, panels/plates and access, stairs and ladder modeler.
Equipment application ranging from pumps, distillation columns, storage vessels, exchangers etc
Pipework routing
HVAC design modeling, Cable tray ,hangers and supports
Converting PDMS Draft and Isodraft to AUTOCAD
Introduction to PDMS project designed to various standards and layout interpretation.

3. OIL AND GAS PROCESSING DESIGN USING ASPEN HYSYS.
Introduction to process engineering and application
Flash calculation and utilities.
Propane Refrigeration loop
Refrigerated Gas Plant
NGL Fractionation Train
Oil Characterization
Gas Gathering
Two-Stage Compression
Acid Gas Sweetening with DEA
Natural Gas Dehydration with TEG
Reporting in Aspen HYSYS
4. Petrel (for sub-surface reservoir modeling and simulation studies).
Introduction and data importation
Seismic interpretation
Fault modeling
Vertical layering
Facies modeling
Petro-physical modeling
Reservoir mapping
Well correlation

Date: 2 April-16 April,2013
Venue: ST’ paul executive services limited.
Address: 44, Awolowo way, ikeja,opposite Eko bank.
Phone number: +2348083631156 , +2348033016880
Email: cockeep46@yahoo.co.uk
Website: www.stpaul.esl.com
Booking for the courses and enquires starts on 20th march-1st of April 2013.Discount for early birds, limited seats available. Our weekend classes holds on Saturday and Sundays.
Available spaces includes-
AutoCAD -10 seats
PDMS -10 seats
Aspen-hysys -5 seats
Petrel -5 seats
We operate on first come-first serve bases. Email or visit us for your registration and enquires. Our schedule time table is out.
Registration and classes has commenced,we expect to see you

Date: 2 April-16 April,2013
Venue: ST’ paul executive services limited.
Address: 44, Awolowo way, ikeja,opposite Eko bank.
Phone number: +2348083631156 , +2348033016880
Email: cockeep46@yahoo.co.uk
Website: www.stpaul.esl.com
Booking for the courses and enquires starts on 20th march-1st of April 2013.Discount for early birds, limited seats available. Our weekend classes holds on Saturday and Sundays.
Available spaces includes-
AutoCAD -10 seats
PDMS -10 seats
Aspen-hysys -5 seats
Petrel -5 seats
We operate on first come-first serve bases. Email or visit us for your registration and enquires. Our schedule time table is out.

Three days to go,book for your space nowwww.