Fogman:

Easy Installation; Manual and diagram is included in the pack. But advice it should be done by rewire.

Please where is it made in?

Diovinci:

Please where is it made in?

Where else, if not the home of technology; Hong Kong

Diovinci:

Please where is it made in?

Where else, if not the home of technology; Hong Kong

08033677688

Hotest selling item. Only 8 units remaining. Order for yours today abd will be deliver FREE (LAGOS orders only).

Call Frank (aka Fogman) NOW: 08033677688

.

Only 5 units remaining! Upgrade now.

08033677688

08033677688

[size=14pt]UPGRADE TO XENON HID NOW![/size]

HID Bulbs increase peripheral visibility up to 70% more than halogen bulbs and provide up to 3x more illuminated coverage than stock lighting.

HID Kits are easy to install, even for the most novice of mechanics. All you need is simple hand tools, like a screw driver, socket wrench and wire cutters.

Want real Bling? A HID Kit can enhance the look of any ride. Brighten up the life of your ride with a new HID Kit from us.


What is HID?
HID (High Intensity Discharge) refers to lighting technology that relies on an electrical charge to ignite xenon gas contained in a sealed bulb. A normal halogen bulb uses a filament which can burn out in as little as 200 hours. HID bulbs are gas filled capsules that are rated for a lifespan of nearly 2500 hours. HID bulbs also shine much brighter due to this technology.

Unlike halogen bulbs, HID`s emit a type of light that closely resembles natural daylight and is therefore easier on human eyes. In fact, HID lights are currently used in most sports arenas, stadiums, and train stations worldwide. Don`t be fooled by lower end Xenon replica bulbs sold at most retail shops. They are no match for the intensity, purity, and efficiency of high intensity discharge headlights.

Item specifications
Brand Name: hid
Model Name: hid kit
Light Source: Xenon
Wattage: 35
Material Type: plastics
Voltage: 12V
Color Temperature: 3000k
Year: 2 years
External Testing Certification: CE
Item Type: Headlights
Item Diameter: 2 inch
Item Weight: 0.85 kg
xenon ballast: 35w slim ballast
Quality: E-mark quality
xenon bulb: H4 Hi/Low
Car Model: All cars
Length/Width/Height: 23/18/7cm

Features:
1) Input Voltage Range: 8V-32V.
2) Start Voltage Range: 9V-16V.
3) Max. Start Voltage: 23kV.
4) Input Current: 3.2A+-0.1A.
5) Output Power: 35W+-1W.
6) HID Efficiency: 98.68%, 3, 500 LM.
7) Working Temperature: -40 ~ +105 Centigrade.

Bulb
1.Approved by accurate focus test: Beam shape is the same as the original one, preventing glare when cars meet.
2.Base made of GE silicone from USA: Shockproof, heat-resistant ,no rupture even against heavy impact.
3.Anti-UV pure quartz bulb: High rigidity, great light penetrability, heat and cold resistant,no implosion.
4.innovative build design: Preventing short circuit caused by touching the tip. Easy installation
5.Professional ceramic rod: Professional ceramic rod made in Germany, no leaking or implosion. Easy start up no matter at high or low voltage profiting from the short distance between tube and rod.

Ballast
1.Wide acceptable range of input voltage from 9~16V: Applicable for almost all the auto
2.SMR super microelectronic memorial chip: Super capacity, can digitally parse and memorize different voltage and unstable electric current information, prevent interference from other electronics,convert and stabilize the voltage after disposed by the ballast without interference to other electronics,which will bring a guaranteed performance and life-span of HID lamp
3.Pure aluminum casting: lnsulative and never desquamates, on interference to the start up of air-condition, audio and other electronic equipment on the auto.
4.Wide range of working temperature: Work well even under the normal high temperature in the engine room, which can lessen the chance of malfunction caused by over heat.
5.Constant temperature protection: Working temperature will not go up with longer lighting time. Even after2~8hours of lighting, it can still keep under 75,which complies with the international standard.

Wires
1.Approved by TUV lSO 9001: Guaranteed quality.
2.Excellent quality of heat resistant, fuel resistant and abrasion proof: Made of the best wires and materials special for auto industry. Superior quality comparing with the one made by common material.
3.Waterproof design: Using the best waterproof connector, to prevent short circuit caused by electric leaking in water.
4.Approved by computer circuit test: Ensure there is no short circuit or open circuit.
5.Applicable even at high electric current (30A): Special design with low impedance, effectively slows down the aging of wires.

HID Kit Includes:
1. 2x Xenon Bulb
2. 2x Waterproof HID Ballast 35W
3. Installation Manual
4. All Necessary Hardware for installation

INTRO PRICES: N10,500 Only

Please call for wholesale/dealers price

(All our Gadget are 90 days warrantied)

Free delivery within Lagos.

OPTIONAL: Courier/ transport way bill delivery anywhere in Nigeria.

For inquiries/order, Please Call:
Frank (aka Fogman)
Tel: 08182428495, 08033677688
Email: fogmanmails@yahoo.com


NB: Post and pictures are edited as at when due and model might be slightly different from pix shown here

* Over 1000 units of our devices Sold since 2009 online, with no single issues/complain

* We are Nigerian biggest supplier of Bluetooth Mirror and other innovative device. Our gadgets quality are exclusive to us alone, since we sources for the best quality directly from manufactures

SA

What's your last price?

Your best: What's your last price?

As indicated above.

[size=14pt]UPGRADE TO XENON HID NOW![/size]

HID Bulbs increase peripheral visibility up to 70% more than halogen bulbs and provide up to 3x more illuminated coverage than stock lighting.

HID Kits are easy to install, even for the most novice of mechanics. All you need is simple hand tools, like a screw driver, socket wrench and wire cutters.

Want real Bling? A HID Kit can enhance the look of any ride. Brighten up the life of your ride with a new HID Kit from us.


What is HID?
HID (High Intensity Discharge) refers to lighting technology that relies on an electrical charge to ignite xenon gas contained in a sealed bulb. A normal halogen bulb uses a filament which can burn out in as little as 200 hours. HID bulbs are gas filled capsules that are rated for a lifespan of nearly 2500 hours. HID bulbs also shine much brighter due to this technology.

Unlike halogen bulbs, HID`s emit a type of light that closely resembles natural daylight and is therefore easier on human eyes. In fact, HID lights are currently used in most sports arenas, stadiums, and train stations worldwide. Don`t be fooled by lower end Xenon replica bulbs sold at most retail shops. They are no match for the intensity, purity, and efficiency of high intensity discharge headlights.

Item specifications
Brand Name: hid
Model Name: hid kit
Light Source: Xenon
Wattage: 35
Material Type: plastics
Voltage: 12V
Color Temperature: 3000k
Year: 2 years
External Testing Certification: CE
Item Type: Headlights
Item Diameter: 2 inch
Item Weight: 0.85 kg
xenon ballast: 35w slim ballast
Quality: E-mark quality
xenon bulb: H4 Hi/Low
Car Model: All cars
Length/Width/Height: 23/18/7cm

Features:
1) Input Voltage Range: 8V-32V.
2) Start Voltage Range: 9V-16V.
3) Max. Start Voltage: 23kV.
4) Input Current: 3.2A+-0.1A.
5) Output Power: 35W+-1W.
6) HID Efficiency: 98.68%, 3, 500 LM.
7) Working Temperature: -40 ~ +105 Centigrade.

Bulb
1.Approved by accurate focus test: Beam shape is the same as the original one, preventing glare when cars meet.
2.Base made of GE silicone from USA: Shockproof, heat-resistant ,no rupture even against heavy impact.
3.Anti-UV pure quartz bulb: High rigidity, great light penetrability, heat and cold resistant,no implosion.
4.innovative build design: Preventing short circuit caused by touching the tip. Easy installation
5.Professional ceramic rod: Professional ceramic rod made in Germany, no leaking or implosion. Easy start up no matter at high or low voltage profiting from the short distance between tube and rod.

Ballast
1.Wide acceptable range of input voltage from 9~16V: Applicable for almost all the auto
2.SMR super microelectronic memorial chip: Super capacity, can digitally parse and memorize different voltage and unstable electric current information, prevent interference from other electronics,convert and stabilize the voltage after disposed by the ballast without interference to other electronics,which will bring a guaranteed performance and life-span of HID lamp
3.Pure aluminum casting: lnsulative and never desquamates, on interference to the start up of air-condition, audio and other electronic equipment on the auto.
4.Wide range of working temperature: Work well even under the normal high temperature in the engine room, which can lessen the chance of malfunction caused by over heat.
5.Constant temperature protection: Working temperature will not go up with longer lighting time. Even after2~8hours of lighting, it can still keep under 75,which complies with the international standard.

Wires
1.Approved by TUV lSO 9001: Guaranteed quality.
2.Excellent quality of heat resistant, fuel resistant and abrasion proof: Made of the best wires and materials special for auto industry. Superior quality comparing with the one made by common material.
3.Waterproof design: Using the best waterproof connector, to prevent short circuit caused by electric leaking in water.
4.Approved by computer circuit test: Ensure there is no short circuit or open circuit.
5.Applicable even at high electric current (30A): Special design with low impedance, effectively slows down the aging of wires.

HID Kit Includes:
1. 2x Xenon Bulb
2. 2x Waterproof HID Ballast 35W
3. Installation Manual
4. All Necessary Hardware for installation

INTRO PRICES: N10,500 Only

Please call for wholesale/dealers price

(All our Gadget are 90 days warrantied)

Free delivery within Lagos.

OPTIONAL: Courier/ transport way bill delivery anywhere in Nigeria.

For inquiries/order, Please Call:
Frank (aka Fogman)
Tel: 08182428495, 08033677688
Email: fogmanmails@yahoo.com


NB: Post and pictures are edited as at when due and model might be slightly different from pix shown here

* Over 1000 units of our devices Sold since 2009 online, with no single issues/complain

* We are Nigerian biggest supplier of Bluetooth Mirror and other innovative device. Our gadgets quality are exclusive to us alone, since we sources for the best quality directly from manufactures

Installation Videos

Video 1:

www.youtube.com/watch?hl=en&gl=NG&client=mv-google&feature=related&rl=yes&v=gEZgsLfdmik


Video 2:

www.youtube.com/watch?v=aKiI5c3Jp74&desktop_uri=%2Fwatch%3Fv%3DaKiI5c3Jp74

Video: 3

www.youtube.com/watch?v=dLEHUJLoOYQ&desktop_uri=%2Fwatch%3Fv%3DdLEHUJLoOYQ

How to Install HID Xenon Lights

High-intensity-discharge (HID) xenon headlights have three major differences compared with halogen headlights: xenon and other noble gas headlamps employ ballast to regulate/ maintain the electrical charge to the light bulb; a projector lens is used rather than a reflector; and good- quality xenon headlamps should last about 10 times longer than halogens. The good news is that HID Xenon headlight assemblies can be installed in most any car, and the brighter light, better efficiency, and longer headlamp light beam can be more economical over time, especially if replacing the light bulbs only.

Difficulty:
Moderate

Things you’ll need:
HID headlight kit
Screwdriver
Power drill
12mm drill bit or circular file

Instructions
Install HID Headlights

1. Buy a good HID kit. Complete conversion kits come with two ballasts (one for each headlamp), two bulbs, mounting hardware and wiring. They also come with a warranty that's good for up to one year.

2. Open the hood and remove both headlight assemblies. If enough room exists in the engine compartment to remove the bulbs, you do not have to remove the headlight housings.

3. Remove the existing headlight bulbs from the headlight housing. This is normally accomplished by a counterclockwise twist of the socket at the back of the light assembly to release the socket and bulb from the light housing.

4. The HID light might be wider than the halogen opening. Delicately drill or use a circular file to create a wider opening, generally 15mm.

5. Install the HID lights in the light assemblies. First remove the cover from the bulb, being careful not to touch the glass portion as oils in the hands can cause blotting on the lights. Use alcohol to remove any smudges if you do touch the bulb. Plug the wiring harness into the rubber base, then fit the back cap onto the assembly. When finished, close the headlight shield tightly by turning in the direction that tightens it.

6. Connect the wires of the HID bulbs to the output of the ballast. The connectors are usually color- coded, and good kits are mistake- proof, with the plugs going in only one way.

7. Connect the output from the battery or other power supply harness to the relay, and in turn connect the relay to the input of the ballast.

8. Secure the ballast(s) to any solid place in the engine bay using double-sided tape, mounting brackets, or zip ties. (Avoid high- temperatures areas in the engine bay.)

9. Test the lights' function. If they blink or light intermittently, turn off the power and check all connections.

Tips & Warnings
A complete, high-quality HID kit is not much more expensive than cheap discount brands. Use forums and chat boards to verify the preferred HID assemblies for your particular vehicle.

Do not adjust HID lights upward; doing so can blind oncoming drivers. If in doubt, have a professional adjust the light beam.

Fogman:

Thanks for your post and your fear is quite understood.

1. The last time i checked, it is not a banned item and i dont believe it will ever be cos its advantages is overwheaming.

2. The Bulb features mentioned above, (which i have written below again) takes care of your fear.

Bulb 1.Approved by accurate focus test: Beam shape is the same as the original one, preventing glare when cars meet. Regards

This is what I have been saying. HID lights are good no doubt but the way they are used in this country is disgusting. Most drivers in Nigeria are not qualified drivers. In advanced country, its mandatory that u dim your High Bean Headlights when within 300ft following another driver and 500ft when facing an upcoming driver. But in Nigeria, we see people with HID facing another driver with the whole high beam on without dimming. Now tell me how that would be safe.. it will blind the coming driver and this has led to lots of accidents. In other words.. the purpose of the HID xenon headlights is not achieved, rather the result is negative. If drivers can learn to dim their lights when facing upcoming vehicle this can be avoided .

elektra80:

This is what I have been saying. HID lights are good no doubt but the way they are used in this country is disgusting. Most drivers in Nigeria are not qualified drivers. In advanced country, its mandatory that u dim your High Bean Headlights when within 300ft following another driver and 500ft when facing an upcoming driver. But in Nigeria, we see people with HID facing another driver with the whole high beam on without dimming. Now tell me how that would be safe.. it will blind the coming driver and this has led to lots of accidents. In other words.. the purpose of the HID xenon headlights is not achieved, rather the result is negative. If drivers can learn to dim their lights when facing upcoming vehicle this can be avoided .

Also, to allay your fear again, check our tip & warning reproduced below again:

Tips & Warnings
A complete, high-quality HID kit is not much more expensive than cheap discount brands. Use forums and chat boards to verify the preferred HID assemblies for your particular vehicle.

Do not adjust HID lights upward; doing so can blind oncoming drivers. If in doubt, have a professional adjust the light beam.

Marpol: Will be in Ogba before this week runs out, we will talk.

Call me ahead, cos i am off Ogba and always on the move.

obitee69: Its kool...I have better nite vision and it adds swag to my car. Its worth it.

Chief, U use HID for ur foglamps also? lolz