How To Root Tecno Q1 and M3
Though this article is a little bit old,but many tecno users find it difficult to get full user right,can not enjoy your full hd games,because you do not know how to root tecno Q1 and M3 , This rooting is easy for some devices and hard on others. Well, if you are a owner of a Tecno Q1 or M3, this rooting procedure should be easy for you. All you need on how to root Tecno Q1 and M3 is below:
Compatible Devices
Tecno Q
Tecno M3
For Tecno M3 consider this other post
Requirements :
Framaroot only .
Framaroot is an application format. Apk is designed to be easy to me-root an Android device. How, you are only required to download the application Framaroot and copy the downloaded file into your device via SD card or other storage.
Same way you install other application that is how you install framaroot.
Procedures:
1. Download Framaroot 1.6.0.apk from here to your device
2. Install and launch Framaroot
Framaroot
Framaroot
3. Click on Install Supersu

4. Click on Boromir
Framaroot-successful
Framaroot-successful
After doing these 3 easy steps, you just have to wait until it says “Superuser and su binary installed. You have to reboot your device”. This means that your device has to be rooted and you have to restart the device. Framaroot can also unroot process. The trick is the same as when I want to root.The difference is, you’re not choosing between Superuser / SuperSU, but unroot option.
I myself had tried it in the Sony Xperia E dual. The results were very satisfactory. Xperia E dual only takes less than 5 minutes to be root.
- See more at: http://.com/how-to-root-tecno-q1-and-m3/#sthash.xrqZBJOC.dpuf

what about l3?

Obascoetubi: what about l3?

use binaryroot software on your pc, download it here http://uploaded.net/file/0fpyh5c5
For This Tutorial, The below Requirements are highly needed.

Requirements::

*. Make sure your device have at least 60% battery power. [How to Check Battery Percentage in Android Device press settings>>Battery or download any battery optimizing app from google play e.g]
*. A Computer with an Internet Access.
*. The Device you want to Root.
*. A USB to connect your Device and Computer
(Bin4nary Root) http://uploaded.net/file/0fpyh5c5
Step 1.
Extract The Zipped File Into A Folder After downloading it from The Link Above With WinZip or anyother extracting Software

Step 2.
Run it and Select 'Other' If it asks you for Device Type. You will then be asked to Connect your Device with USB debugging Enabled. (Enable it By going to Settings > Applications > Development > USB debugging and tick the USB debugging option)

Step 3.
Press enter, connect your phone, follow the on-screen instructions to complete the process.
The messages will tell you that the phone needs rebooting and will do this several times - do not panic!

Step 4.
Your Tecno L3 handset is now rooted

WHAT ABOUT PHANTOM AIII?