* This small gadget will alert and warn people stay far away from danger field when it detects smoke.
* This product detects the smoke by a couple of infrared diodes. The principle of detecting is granule in the smoke can reflect infrared light. Infrared diodes are placed in the special chamber. The chamber can shield external light, but don't affect the smoke into it.
* While have no smoke, the diode can receive very weak infrared light. When the smoke entering the chamber, diode can receive more and more light, when the smoke attains the certain density, the detector can give out alarm signal. In order to reduce the interference and lower power consumption, the emitting circuit adopts the pulse signal.
* The detector adopts the special structure design and ASIC, has the dustproof, mothproof and anti outside light interference feature etc.
* The detector is suitable for detect the smoke in house, shop, hotel, restaurant, office building, school, bank, library, computer house and storehouse etc.
Features:
Brand new battery operated smoke alarm
General purpose design, ideal for all areas
Suitable for house, shop, hotel, restaurant, office building, school, bank, library, computer house and storehouse, etc
Alerts and warns people to stay far away from dangerous field when it detected invisible fire particles
Extremely necessary gadget for preventing from household fire
Alarm test button for easy recommended monthly testing
Easy to install
Powered by 9V battery which provides continuous protection even during power outages (Included)
Low battery signal, Loud 85db alarm signal
Note:
* The detector can not be installed under worse environment, e.g. coldest, hottest, and dusty
* Please test it monthly
* Please clean the detector by soft brush regularly
* Please set up battery correctly
* When the voltage is low or chamber is dirty, the detector will beep once per 40 seconds. Please pay attention to change the battery.
Package includes:
1 x Wireless Smoke Detector Fire Alarm
1 x User Manual
1 x 9V Battery

Price: N3,000
Lagos

Smoke detector

Bethel Mendels Int'l Ltd is the major importer of Fire/smoke alarm detector in Nigeria. we are looking for resellers to partner with us to distribute this hot product in Nigeria. we offer the cheapest wholesale prices for quantity purchase. find below product various quantity order and their discounted prices.
Wholesale Price:
Qty Price
10 - 20 ₦2,000.00
21 - 49 ₦1,900.00
50 - 99 ₦1,800.00
100 + ₦1,700.00
we offer nationwide delivery to any location in Nigeria
For Purchase enquiry Call/Whatsapp 08036911296
Product Features/Benefits
It's an overused saying - better safe than sorry. Most fire deaths occur in homes lacking smoke detectors. To protect your loved ones, it is imperative that you install smoke detectors in your home.
Smoke alarms are crucial elements in the early detection of fires. Smoke and toxic fumes spread through a house faster than flames. They are especially hazardous and can cause respiratory burns, lightheadedness, nausea, confusion, and sleepiness.
Smoke inhalation is the primary cause of death for home fire victims.Smoke caused by fire is very dangerous, especially because of today`s widespread use of synthetic materials in modern homes that might generate poisonous vapours when burning. The smoke alarm detects smoke caused by smouldering at an early stage and warns by means of a loud vibrant sound thereby waking inhabitants up at a point of time when a safe escape is still possible.
About half of home fire deaths occur between the hours of 11 p.m. and 7 a.m., while residents are asleep. Without a smoke alarm to wake residents and alert them to the danger, they are likely to succumb to carbon monoxide poisoning or smoke inhalation. Because families may have as little as two minutes to get out of their house once a fire starts, smoke alarms provide the warning that residents need to safely escape. The detector is suitable for detecting smoke in houses, shop, hotel, restaurant, office building, school, bank, library, computer house and storehouse etc.
The smoke alarm operates according to the scattered light principle. A light source and a photocell are arranged so as to ensure that normally no light strikes the photocell. The light source is activated in short intervals, if the concentration of smoke particles in the enclosure reaches a certain level, the light is reflected and reaches the photocell. This will set off a loud fire alarm.
PLACEMENT
. As most fires in flats starts in the living areas, it is recommended to install smoke alarms between the living and sleeping area. As a minimum requirement a smoke alarm should be installed outside every sleeping area in a flat. If there are separate sleeping area a smoke alarm is to be installed outside each sleeping area.
. The minimum requirement for a multi-story houses is to install a smoke alarm on every floor of the house and outside each sleeping area, e.g in the hallway connecting the sleeping area or on the stairway leading to this hallway. If there is a room in the attic, it is strongly recommended to install a smoke alarm on the ceiling as well.
. A smoke alarm shall be install in the sleeping area of a caravan
. For COMPLICATED OR EXTENSIVE PROPERTIES, PLEASE REQUEST QUALIFIED ADVICE FROM A SAFETY ENGINEER OR THE FIRE BRIGADE.
THE FOLLOWING LOCATIONS SHALL BE AVOIDED
. Next to doors, windows, ventilators etc, where draughts can deviate smoke from the sensor
. In small or poorly ventilated garages or kitchens where waste gas or vapour may cause may cause false alarms.
. In areas where dust and dirt can interfere with the smoke alarm operation or cause false alarms
. In areas where insect are likely to trigger the alarm
. In damp or humid areas (e.g in the bathrooms)
. In rooms where the temperature may often fall below -5degree centigrade or exceed +38degree centigrade.
INSTALLATION
. Attach the mounting bracket to the ceiling or wall
. Install the battery (included) match the terminals on the end of the battery with the terminals on the unit. Match ‘’+’’ to ‘’+’’ and ‘’-‘’ to ‘’-‘’. Push the battery in until it snaps in securely and cannot be shaken loose
. Attach the smoke alarm to the mounting bracket. Turn the smoke alarm clockwise (right) until it snaps into place
. Check immediately after finishing the installation that the smoke detector works properly by pressing the test button for at least 2 seconds.
BATTERY OPERATION
The functioning of the detector is maintained even in case of power failure. On an average the battery`s (standard 9V battery) services life is 1year.
SIGNAL LAMP (LED)
A flashing small light (every 43s) signals a false free-free operation.
FULLY AUTOMATIC TEST FUNCTION
Advance electronics ensure the best possible operating readiness by means of an automatic self-test function.
BATTERY WARNING FUNCTION
By means of a warning sound repeated every 43 seconds (for up to one month), the smoke detector signalises that the power supply of the battery is insufficient and it needs to be replaced.
CONTROL BUTTON
Temporarily increases the detector`s sensitivity to test the alarm function
NOISY (85dBA) PIEZOELECTRIC WARNING SOUND
Vibrant warning sound in case of fire alarm-high frequency
NOTE: This device does not contain any radioactive substances!
TESTING THE ALARM
A flashing LED signals accurate operation. A loud vibrating sound occurs in case of smoke alarm, a short whistling tone occurs every 30 to 40 seconds for up to one month signalling that the battery needs to be replaced.
Test the smoke alarm weekly for your security by pressing the respective button (for at least 2 seconds) until you hear the alarm.
FEATURES:
Stand alone surface mounted, easy operate, Built-in IC card, stable performance, high sensitivity Apply optical smoke test room, With buzzer, alarm independently, 9V battery, static current: ≤10uA, alarm current: ≤12mA, Low power alarm, Alarm volume: ≥85dB, Temperature range: -10~50?C, Humidity: ≤95%RH, Size: Φ107X34MM.
It is easy to mount on your ceiling or prefered position,
FALSE ALARMS
After every alarm, check if the there is a fire. In case of false alarm do not remove the battery but fan the air around the smoke alarm until the alarm turns off, (if necessary vacuum the outside cover) after the alarm the device is immediately ready for operation.
NOTE: If Your Smoke Alarm Sounds Because of Cooking:
. Press the “Hush” or “Silent” button.
. Open the window.
. Wave a towel underneath the alarm to clear the smoke/steam away.
. Move the alarm away from the kitchen or bathroom.
Never remove the battery or disable the smoke alarm!