.

vote people,no violence.

Solar power.

congrates GMB

Do you mean 12V or its 2V battery?

I mean its 2volts battery.

careidon:
Do you mean 12V or its 2V battery?

60 amps solar charge controller 12/24/48 volts mppt.110,000 naira only.

The holy grail of mppt solar charge controller 60amps 12/24/36/48/60.

Nominal Battery Voltages
12, 24, 36, 48, or 60 VDC (Single model - selectable via field programming at start-up)
Maximum Output Current
60 amps @ 104° F (40°C) with adjustable current limit
Maximum Solar Array STC Nameplate
12 VDC systems 900 Watts / 24 VDC systems 1800 Watts / 48 VDC systems 3600 Watts / 60 VDC Systems 4500 Watts
NEC Recommended Solar Array STC Nameplate
12 VDC systems 750 Watts / 24 VDC systems 1500 Watts / 48 VDC systems 3000 Watts / 60 VDC Systems 3750 Watts
PV Open Circuit Voltage (VOC)
150 VDC absolute maximum coldest conditions / 145 VDC start-up and operating maximum
Standby Power Consumption
Less than 1 Watt typical
Power Conversion Efficiency
98.1% @ 60Amps in at 48 VDC System voltage - Typical
Charging Regulation
Five Stages: Bulk, Absorption, Float, Silent and Equalization
Voltage Regulation Set points
10 to 80 VDC user adjustable with password protection
Equalization Charging
Programmable Voltage Setpoint and Duration - Automatic Termination when completed
Battery Temperature Compensation
Automatic with optional RTS installed / 5.0 mV per °C per 2V battery cell
Voltage Step-Down Capability
Can charge a lower voltage battery from a higher voltage PV array - Max 150 VDC input
Programmable Auxilary Control Output
12 VDC output signal which can be programmed for different control applications
(Maximum of 0.2 amps DC)
Status Display
3.1" (8 cm) backlit LCD screen - 4 lines with 80 alphanumeric characters total
Remote Display and Controller
Optional Mate or Mate2 with RS232 Serial Communications Port
Network Cabeling
Proprietary network system using RJ 45 Modular Connectors with CAT 5e Cable (8 wires)
Data Logging
Last 128 days of Operation - Amp Hours, Watt Hours, Time in Float , Peak Watts, Amps, Solar Array Voltage, Max Battery Voltage Min Battery Voltage and Absorb for each day along with total Accumulated Amp Hours, and kW Hours of production
Hydro Turbine Applications
Consult factory for approved Turbines
Positive Ground Applications
Requires two Pole Breakers for switching both positive and Negative Conductors on both Solar Array and Battery Connections (HUB-4 and HUB-10 can not be used for use in positive ground applications)
Operating Temperature Range
Minimum -40° to maximum 60° C
(Power capacity of the controller is automatically derated when operated above 40° C)
Environmental Rating
Indoor Type 1
Conduit Knockouts
One 1" (35mm)on the back; One 1" (35mm) on the left side; Two 1" (35mm) on the bottom
Weight - Unit
11.65 lbs (5.3 kg)
- Shipping
13.64 lbs (6.0 kg)
Dimensions - Unit
13.5 x 5.75 x 4" (40 x 14 x 10 cm) PRICE:120,000 Naira.

runz:
I will keep uploading pictures of different solar components gradually.

Nominal Battery Voltages
12, 24, 36, 48, or 60 VDC (Single model - selectable via field programming at start-up)
Maximum Output Current
60 amps @ 104° F (40°C) with adjustable current limit
Maximum Solar Array STC Nameplate
12 VDC systems 900 Watts / 24 VDC systems 1800 Watts / 48 VDC systems 3600 Watts / 60 VDC Systems 4500 Watts
NEC Recommended Solar Array STC Nameplate
12 VDC systems 750 Watts / 24 VDC systems 1500 Watts / 48 VDC systems 3000 Watts / 60 VDC Systems 3750 Watts
PV Open Circuit Voltage (VOC)
150 VDC absolute maximum coldest conditions / 145 VDC start-up and operating maximum
Standby Power Consumption
Less than 1 Watt typical
Power Conversion Efficiency
98.1% @ 60Amps in at 48 VDC System voltage - Typical
Charging Regulation
Five Stages: Bulk, Absorption, Float, Silent and Equalization
Voltage Regulation Set points
10 to 80 VDC user adjustable with password protection
Equalization Charging
Programmable Voltage Setpoint and Duration - Automatic Termination when completed
Battery Temperature Compensation
Automatic with optional RTS installed / 5.0 mV per °C per 2V battery cell
Voltage Step-Down Capability
Can charge a lower voltage battery from a higher voltage PV array - Max 150 VDC input
Programmable Auxilary Control Output
12 VDC output signal which can be programmed for different control applications
(Maximum of 0.2 amps DC)
Status Display
3.1" (8 cm) backlit LCD screen - 4 lines with 80 alphanumeric characters total
Remote Display and Controller
Optional Mate or Mate2 with RS232 Serial Communications Port
Network Cabeling
Proprietary network system using RJ 45 Modular Connectors with CAT 5e Cable (8 wires)
Data Logging
Last 128 days of Operation - Amp Hours, Watt Hours, Time in Float , Peak Watts, Amps, Solar Array Voltage, Max Battery Voltage Min Battery Voltage and Absorb for each day along with total Accumulated Amp Hours, and kW Hours of production
Hydro Turbine Applications
Consult factory for approved Turbines
Positive Ground Applications
Requires two Pole Breakers for switching both positive and Negative Conductors on both Solar Array and Battery Connections (HUB-4 and HUB-10 can not be used for use in positive ground applications)
Operating Temperature Range
Minimum -40° to maximum 60° C
(Power capacity of the controller is automatically derated when operated above 40° C)
Environmental Rating
Indoor Type 1
Conduit Knockouts
One 1" (35mm)on the back; One 1" (35mm) on the left side; Two 1" (35mm) on the bottom
Weight - Unit
11.65 lbs (5.3 kg)
- Shipping
13.64 lbs (6.0 kg)
Dimensions - Unit
13.5 x 5.75 x 4" (40 x 14 x 10 cm) Price:120,000

Good day house.

Like how much's 2.5kva batry & like how long'll the batry last long if use to power all bulb in a 3b/r flat, 3 ceilin fans throughout nite & use fo like 5hours during day

please call us on 08068627401

bigdot1759:
Like how much's 2.5kva batry & like how long'll the batry last long if use to power all bulb in a 3b/r flat, 3 ceilin fans throughout nite & use fo like 5hours during day