Biomass fuel boiler pipe is an important part conveying hot water or steam,it consists of the main-pipe,sub-steam cylinder,condensation backwater system,boiler softened water filling system, etc.The following introduction about the biomass fuel boiler piping system components are given by ZG for your reference :
The steam main pipe of biomass fuel boiler
It is the pipe connecting the biomass boiler steam outlet and sub-steam cylinder.
The sub-steam cylinder of of biomass fuel boiler
Its function is stabilizing the steam pressure,controlling and adjusting the steam consumption of each branch pipe.Its production and installation are the same as the water separator,but it should guarantee the position of main pipe,safety valve connecting pipe,pressure gauge connecting pipe,emergency vent pipe,and condensate drain device connecting pipe.
The condensate system of biomass fuel boiler
The condensed water tank and water pump should be located in the lower part of the biomass fuel boiler room outside,they can also be located in the basement of boiler room to facilitate the condensate recovery,in the steam system ,the condensate recovery still can be used to add into the boiler,it can reduce the amount of processing softened water,so the condensate recovery system should be used.
ZG biomass fuel boilers have larger furnace space and reasonable secondary air layout,which is advantageous to the sufficient combustion of biomass fuel,pleasure feel free to contact us for more details!
http://www.zgvessel.com/steamboiler/szl-assembly-biomass-fired-boiler.html