goodday everyone, I know there are lots of
Android users that doesn’t know how
to boot into recovery mode. If the conventional
method of booting into recovery mode doesn’t
work out for you, then one of the below will surely
work out well for you.
The truth is every new Android powered tablet /
smartphone device is normally installed with a
stock recovery image . The tool can be used by
those who want to perform update operations,
backup procedures and maintenance and
optimization tasks.
Well, if you want to obtain even more from your phone, of if you want to tweak its performances, then you can anytime replace the stock recovery with a custom recovery image, like CWM recovery or TWRP recovery.
Of course for the custom tools you will have to
root your device first.


You boot into recovery mode, if you want to do
the following...
==>Factory reset or system update your device
==>Load your boot.img or update it from SD Card
==>Update your system image or restore your
back up from SD card.
==>Or perhaps if your device over misbehave and
the only option you have left is to take it back to
genesis.


How to Enter Recovery Mode on Stubborn
Android Devices


Usually you can boot into recovery mode by:
==>Turn off you device.
==>Then, reboot by pressing the Power and
Volume Up buttons simultaneously.
==>Keep the buttons pressed for a short while –
a few seconds – and then release the same.
==>The recovery mode menu should be displayed.
==>Note: on Samsung branded devices the
recovery mode can be entered by pressing the
Power, Volume Up and Home buttons at the same
time.
But, if the above method didn’t work out well for
you, you can try the below


Method 1

1. You need to download an app on your
smartphone.
2. So go to Google Play and download the Quick
Boot tool;
3. Install the app on your phone / tablet.
4. Run the same.
5. You will be able to choose from: Recovery,
Reboot, Bootloader and Power Off.
6. Choose Recovery.
7. Your device will reboot into recovery
mode.

Method 2

1. On this method you will have to use ADB, so
the Android SDK and Fastboot must be installed
on your computer.
2. After installing the required tools (the one
mentioned above) connect your device with the
computer.
3. Use the USB cable for establishing the
connection.
4. Then, on your computer navigate to the folder
where Fastboot and Android SDK is installed.
5. There open a Command Prompt window.
6. For cmd: press Shift key on your PC +
Right-click anywhere in the folder and choose
“Open Command Prompt”.
7. Then, in the cmd window enter: “adb
reboot recovery”.
8. Your smartphone / tablet will be automatically
rebooted into recovery mode.
That’s all.

crop from: www.niyonice.com/2015/02/how-to-enter-recovery-mode-on-encrypted.html?m=1

Niyonice:
goodday everyone, I know there are lots of
Android users that doesn’t know how
to boot into recovery mode. If the conventional
method of booting into recovery mode doesn’t
work out for you, then one of the below will surely
work out well for you.
The truth is every new Android powered tablet /
smartphone device is normally installed with a
stock recovery image . The tool can be used by
those who want to perform update operations,
backup procedures and maintenance and
optimization tasks.
Well, if you want to obtain even more from your phone, of if you want to tweak its performances, then you can anytime replace the stock recovery with a custom recovery image, like CWM recovery or TWRP recovery.
Of course for the custom tools you will have to
root your device first.


You boot into recovery mode, if you want to do
the following...
==>Factory reset or system update your device
==>Load your boot.img or update it from SD Card
==>Update your system image or restore your
back up from SD card.
==>Or perhaps if your device over misbehave and
the only option you have left is to take it back to
genesis.


How to Enter Recovery Mode on Stubborn
Android Devices


Usually you can boot into recovery mode by:
==>Turn off you device.
==>Then, reboot by pressing the Power and
Volume Up buttons simultaneously.
==>Keep the buttons pressed for a short while –
a few seconds – and then release the same.
==>The recovery mode menu should be displayed.
==>Note: on Samsung branded devices the
recovery mode can be entered by pressing the
Power, Volume Up and Home buttons at the same
time.
But, if the above method didn’t work out well for
you, you can try the below


Method 1

1. You need to download an app on your
smartphone.
2. So go to Google Play and download the Quick
Boot tool;
3. Install the app on your phone / tablet.
4. Run the same.
5. You will be able to choose from: Recovery,
Reboot, Bootloader and Power Off.
6. Choose Recovery.
7. Your device will reboot into recovery
mode.

Method 2

1. On this method you will have to use ADB, so
the Android SDK and Fastboot must be installed
on your computer.
2. After installing the required tools (the one
mentioned above) connect your device with the
computer.
3. Use the USB cable for establishing the
connection.
4. Then, on your computer navigate to the folder
where Fastboot and Android SDK is installed.
5. There open a Command Prompt window.
6. For cmd: press Shift key on your PC +
Right-click anywhere in the folder and choose
“Open Command Prompt”.
7. Then, in the cmd window enter: “adb
reboot recovery”.
8. Your smartphone / tablet will be automatically
rebooted into recovery mode.
That’s all.

crop from: www.niyonice.com/2015/02/how-to-enter-recovery-mode-on-encrypted.html?m=1

nice post