What you can do yourself to keep your car on the road?

If everything said on TV was true, then keeping a vehicle running great, looking good, and lasting a long time would be the easiest thing ever. Advertising will tell us over and over that all we need to do is to keep the car or truck running forever and looking brand new for years is to pour some bottles of miracle liquid into the car, then sprinkle magic dust on the paint, or spray some sort of wonder water on the interior. Unfortunately this is not the case.
Here are some tips on how on car maintenance

1. Check and change the oil. No single step will help an engine last more than regular oil and filter changes will. Conversely, nothing will destroy an engine faster than neglecting oil-level checks or fresh-oil changes.

2. Flush the cooling system and change coolant once a year. A 50/50 mix of coolant and distilled water will keep the cooling system in good shape and prevent corrosion and deposits from building up inside the cooling system.

3. Change out transmission and differential oils. While not requiring frequent service, these fluids must be changed according to service intervals. Always use transmission fluid or gear oil of the recommended type and viscosity.
4. Keep it clean. While washing the outside of the vehicle is obvious, most everything the vehicle ran over can also get stuck to the underside. Hosing off road grime is a good idea.

5. Everything with moving parts needs grease to survive. This ball joint went into early retirement due to poor lubrication.

6. Nothing keeps paint looking good and protected like a coat of quality wax. Apply wax at least every six months.

7. Driveline components such as u-joints also require regular lubrication. The driveline may have to be removed to access the zerk grease fitting.

8. Protect the interior plastic by parking the vehicle in the shade, using a window deflector screen, and applying a UV protectant to prevent the plastic and vinyl from drying out.

9. Inspect, clean, and repack wheel bearings with wheel bearing grease according to service intervals. Wheel bearings and grease are inexpensive compared to spindle and hub replacement, or liberated wheels rolling down the road ahead of you.

10. Brake fluid is hygroscopic. This means it is adept at attracting moisture. Moisture causes components to corrode and fail. Replace fluid and bleed system once a year. Brake fluid is cheap. Calipers, hoses, and sensors are expensive.


Don’t forget to visit www.tequilanigeria.com

Very nice, thumbs up

edozie04:
Very nice, thumbs up

Thank You

Merlissa:



Thank You

sorry for derailing, can I send pm?

edozie04:
sorry for derailing, can I send pm?

Your free

Merlissa:



Your free

Can't reply emails for now,7F54A60C, please do add