Zifax global services offers the new Galvanized polystyrene 3D wall panel system which is a new type of building wall material. It can replace the brick wall to be used as load-bearing walls, non-load-bearing walls and floors, balconies and so on. It has features of expanding building area (10% -15%), noise insulation, heat insulation, earthquake resistance waterproof, simple installation, light weight,etc. All these features greatly reduce the cost of the project.

Meshes
Panels can be supplied with wire meshes having different diameters, surface treatment (hot or cold galvanizing) and different geometrical characteristics.
All the processes involved in the production of the elements composing the 3d panel system are continuously subjected to the checks provided for by the ISO regulations.
We have our testing report of wire strength. Wire mesh resist the vertical pressure and diagonal wire resist shearing force.


Polystyrene (EPS)
The base element of the building system is a self-extinguishing foam polystyrene, suitably shaped, used both as a disposable form and as an insulating layer.
The EPS (sintered foam polystyrene) is made up of carbon, hydrogen and, for 98%, air. It is realized starting from the polymerization of styrene, a monomer obtained from oil and present in common food too (ex.: wheat, strawberries, meat, coffee). The latter, before being foamed, shows itself in the shape of little transparent pearls.
Thickness, shape and density of the panel polystyrene core may change according to specific requirements. The minimum density normally used is equal to 15 kg/m³.


Plaster
Once the 3d panels have been installed, they are anchored and finished with the application of light concrete on both of their sides. In this way we realize buildings with load-bearing walls consisting of two reinforced concrete plates made integral by a thick network of connectors, with an insulating core.
When single panel is finished, , by applying on each side a layer of spritz-beton (water, concrete and sand) having characteristic resistance of 25 Mpa at least.
As a load-bearing element, the double panel and the floors are finished during the installation with a cast of suitably resistant concrete into the polystyrene plates.
Should not the panels carry out a load-bearing function, a concrete-based plaster, even a pre-mixed one, is applied for a thickness of at least 25mm

Check out our wide rang of products
@
.
: NAZE INDUST. CLUSTER OWERRI
Phone : 08065083945
Email :zephon84@yahoo.com, info@zifax.com.ng,
Website : www.zifax.com.ng
Thanks

Or meet our sales Rep
Address : 15 ejanolibu street, ogoyo ajah, lekki 2, Lagos

Reinforced EPs wiremesh wall plaster system