Car Tyre Inflator 100% brand new . This car tyre inflator can pump/inflate the tyres of Saloon Cars,Bicycles and Motorbikes under emergency situations, thereby saving you a lot of cost, labour, effort and energy of searching for a vulcanizer under stringent conditions. With this handy car tyre inflator you can inflate/pump your car tyre anytime and anywhere within 3 minutes by connecting it to your working car lighter/charging port/socket. This car tyre inflator has a dimension of 150mm x 150mm and a package weight of 585g/1.3pounds, a package size of 16.5cm x 8.5cm x 12.5cm, comes with 3m power lead with lighter plug, 2m long rubber air hose long enough to get to the back tyres, metal valve fitting (screw on),in-line pressure gauge a On and Off switch,three inflation adapters stored in a Velcro pouch has an anti-vibration rubber feet and a carry handle, works with a voltage of DC 12V/13.5V, current consumption of 10 amps a flow Rate of 35 L/min (without loading) and a maximum air pressure of 300psi, very portable, extremely easy to use, comes in an attractive colour and cyclic design.
Instructions On Usage: Start your vehicle, then connect the lighter plug on the car tyre inflator into your lighter/charging port, switch ON the tyre inflator (NOTE : always ensure the switch is in OFF position before plugging into your car charging/lighter port) attach the air hose of the car tyre inflator into your tyre valve, screw tightly with your thumb to avoid air escaping, carefully monitor the pressure gauge on the tyre inflator, until it gets to the specified/desired tyre pressure psi (between 35psi - 45psi) of your car tyre, switch OFF the car tyre inflator, unscrew the black rubber air hose from the tyre valve, unplug the lighter plug from the charging/lighter socket, switch OFF your car, then store the car tyre inflator in a cool dry place. NOTE: For optimal durability, always allow the car tyre inflator to cool, before you inflate/pump another tyre as unit might become warm after frequent use.
Car Tyre Inflator 100% brand new . This car tyre inflator can pump/inflate the tyres of Saloon Cars,Bicycles and Motorbikes under emergency situations, thereby saving you a lot of cost, labour, effort and energy of searching for a vulcanizer under stringent conditions. With this handy car tyre inflator you can inflate/pump your car tyre anytime and anywhere within 3 minutes by connecting it to your working car lighter/charging port/socket. This car tyre inflator has a dimension of 150mm x 150mm and a package weight of 585g/1.3pounds, a package size of 16.5cm x 8.5cm x 12.5cm, comes with 3m power lead with lighter plug, 2m long rubber air hose long enough to get to the back tyres, metal valve fitting (screw on),in-line pressure gauge a On and Off switch,three inflation adapters stored in a Velcro pouch has an anti-vibration rubber feet and a carry handle, works with a voltage of DC 12V/13.5V, current consumption of 10 amps a flow Rate of 35 L/min (without loading) and a maximum air pressure of 300psi, very portable, extremely easy to use, comes in an attractive colour and cyclic design.
Instructions On Usage: Start your vehicle, then connect the lighter plug on the car tyre inflator into your lighter/charging port, switch ON the tyre inflator (NOTE : always ensure the switch is in OFF position before plugging into your car charging/lighter port) attach the air hose of the car tyre inflator into your tyre valve, screw tightly with your thumb to avoid air escaping, carefully monitor the pressure gauge on the tyre inflator, until it gets to the specified/desired tyre pressure psi (between 35psi - 45psi) of your car tyre, switch OFF the car tyre inflator, unscrew the black rubber air hose from the tyre valve, unplug the lighter plug from the charging/lighter socket, switch OFF your car, then store the car tyre inflator in a cool dry place. NOTE: For optimal durability, always allow the car tyre inflator to cool, before you inflate/pump another tyre as unit might become warm after frequent use.
Car Tyre Inflator 100% brand new . This car tyre inflator can pump/inflate the tyres of Saloon Cars,Bicycles and Motorbikes under emergency situations, thereby saving you a lot of cost, labour, effort and energy of searching for a vulcanizer under stringent conditions. With this handy car tyre inflator you can inflate/pump your car tyre anytime and anywhere within 3 minutes by connecting it to your working car lighter/charging port/socket. This car tyre inflator has a dimension of 150mm x 150mm and a package weight of 585g/1.3pounds, a package size of 16.5cm x 8.5cm x 12.5cm, comes with 3m power lead with lighter plug, 2m long rubber air hose long enough to get to the back tyres, metal valve fitting (screw on),in-line pressure gauge a On and Off switch,three inflation adapters stored in a Velcro pouch has an anti-vibration rubber feet and a carry handle, works with a voltage of DC 12V/13.5V, current consumption of 10 amps a flow Rate of 35 L/min (without loading) and a maximum air pressure of 300psi, very portable, extremely easy to use, comes in an attractive colour and cyclic design.
Instructions On Usage: Start your vehicle, then connect the lighter plug on the car tyre inflator into your lighter/charging port, switch ON the tyre inflator (NOTE : always ensure the switch is in OFF position before plugging into your car charging/lighter port) attach the air hose of the car tyre inflator into your tyre valve, screw tightly with your thumb to avoid air escaping, carefully monitor the pressure gauge on the tyre inflator, until it gets to the specified/desired tyre pressure psi (between 35psi - 45psi) of your car tyre, switch OFF the car tyre inflator, unscrew the black rubber air hose from the tyre valve, unplug the lighter plug from the charging/lighter socket, switch OFF your car, then store the car tyre inflator in a cool dry place. NOTE: For optimal durability, always allow the car tyre inflator to cool, before you inflate/pump another tyre as unit might become warm after frequent use.
