1 Month Certified RF/Transmission Engineering Training


RF Engineering

More and more people want to remain mobile while still connected to network resources. A typical example here is the wireless connection between our mobile phones and operators’ Base Stations. This concept of wireless (RF) is very wide and is covered under our RF Engineering training.

From scenarios as simple as connecting LANs in two offices together using radios and antennas in a LOS, Point to Point architecture; to complex scenarios of connecting thousands of handsets to a Base Station without cables (NLOS, PmPt), RF principles are basically the same and are covered under this course. These same principles can be applied in various formats, at different frequencies or manipulated to give birth to new standards. You will learn to configure Base Stations for Non Line of Site (NLOS) operations with Customer Premise Equipment (CPEs); you will learn to configure Radios for Point to Point communication, say between a branch office and its head office; you will learn to Design such RF networks, before implementation.

At the end of the training, you would have covered the curriculum for the Certified Wireless Network Administrator, CWNA, and be qualified to write the certification exam.

Starting Monday-feb 22-2016

Course outline for Transmission Engineering

VSAT: Installation & Configuration leading to CSI
• Theory of Satellite Communication, Assembling of VSAT Hardware from LNA, Feedhorn, BUC, etc. Installing VSAT: Setting Azimuth, Elevation Using Compass & Inclinometer. Terminating & Connecting the Feeder Cables. Entering & Configuring the Modem, Tracking the Satellite. Commissioning the VSAT.

Introduction for Optical Fibre
• Couplers, Connectors. Multi-mode, single-mode, Pigtails, Patch Cords, etc. Demonstration of Use of Fibre Toolkit, Media Converter, etc. Implementation of Fibre Optics for LANs.

VoIP & VPN Design and Configuration
• Installation & Configuration of VoIP Gateways. Assigning Telephone Nos to Phones. Demonstration of Calls on Wired Network. Concepts, Protocols & Implementation of VPNs.

Installing MW Radios, PDH, SDH Links


Introduction to GSM Engineering
• GSM Radio & Switches. GSM Fundamentals. Introduction to GPRS, UMTS, etc. Upgrade of 2G to 2.5G to 3G & 4GLTE Networks.

RF Planning & Implementation leading to CWNA
• RF Planning using Modelling Tools Software, RF Site Survery. Installing & Connecting Antennas for 2.4GHz RF. Entering & Navigating Radios. Basic Radio Configuration.

ISP Base Station Configuration
• Base Station Hardware Installation, Installing Network Software, Configuring IP Settings.

.WIMAX Network Configuring 2.4 & 5GHZ Radios for Power Station 5
• Configuring VLANs. Configuring Base, Station as Access Point, Wireless, Bridge, Repeater, WDS. Configuring, Security. Configuring Firewall & NAT., Configuring WAN Parameters.

90% practicals,ON-SITE Training.

Contact Us at Keltech-Communications,1 Adekunle Araba Street,off chemist b/s,Okota Isolo lagos.
+234-8033052996.

1 Month Certified RF/Transmission Engineering Training


RF Engineering

More and more people want to remain mobile while still connected to network resources. A typical example here is the wireless connection between our mobile phones and operators’ Base Stations. This concept of wireless (RF) is very wide and is covered under our RF Engineering training.

From scenarios as simple as connecting LANs in two offices together using radios and antennas in a LOS, Point to Point architecture; to complex scenarios of connecting thousands of handsets to a Base Station without cables (NLOS, PmPt), RF principles are basically the same and are covered under this course. These same principles can be applied in various formats, at different frequencies or manipulated to give birth to new standards. You will learn to configure Base Stations for Non Line of Site (NLOS) operations with Customer Premise Equipment (CPEs); you will learn to configure Radios for Point to Point communication, say between a branch office and its head office; you will learn to Design such RF networks, before implementation.

At the end of the training, you would have covered the curriculum for the Certified Wireless Network Administrator, CWNA, and be qualified to write the certification exam.

Starting Monday-feb 22-2016

Course outline for Transmission Engineering

VSAT: Installation & Configuration leading to CSI
• Theory of Satellite Communication, Assembling of VSAT Hardware from LNA, Feedhorn, BUC, etc. Installing VSAT: Setting Azimuth, Elevation Using Compass & Inclinometer. Terminating & Connecting the Feeder Cables. Entering & Configuring the Modem, Tracking the Satellite. Commissioning the VSAT.

Introduction for Optical Fibre
• Couplers, Connectors. Multi-mode, single-mode, Pigtails, Patch Cords, etc. Demonstration of Use of Fibre Toolkit, Media Converter, etc. Implementation of Fibre Optics for LANs.

VoIP & VPN Design and Configuration
• Installation & Configuration of VoIP Gateways. Assigning Telephone Nos to Phones. Demonstration of Calls on Wired Network. Concepts, Protocols & Implementation of VPNs.

Installing MW Radios, PDH, SDH Links


Introduction to GSM Engineering
• GSM Radio & Switches. GSM Fundamentals. Introduction to GPRS, UMTS, etc. Upgrade of 2G to 2.5G to 3G & 4GLTE Networks.

RF Planning & Implementation leading to CWNA
• RF Planning using Modelling Tools Software, RF Site Survery. Installing & Connecting Antennas for 2.4GHz RF. Entering & Navigating Radios. Basic Radio Configuration.

ISP Base Station Configuration
• Base Station Hardware Installation, Installing Network Software, Configuring IP Settings.

.WIMAX Network Configuring 2.4 & 5GHZ Radios for Power Station 5
• Configuring VLANs. Configuring Base, Station as Access Point, Wireless, Bridge, Repeater, WDS. Configuring, Security. Configuring Firewall & NAT., Configuring WAN Parameters.

90% practicals,ON-SITE Training.

Contact Us at Keltech-Communications,1 Adekunle Araba Street,off chemist b/s,Okota Isolo lagos.
+234-8033052996

1 Month Certified RF/Transmission Engineering Training


RF Engineering

More and more people want to remain mobile while still connected to network resources. A typical example here is the wireless connection between our mobile phones and operators’ Base Stations. This concept of wireless (RF) is very wide and is covered under our RF Engineering training.

From scenarios as simple as connecting LANs in two offices together using radios and antennas in a LOS, Point to Point architecture; to complex scenarios of connecting thousands of handsets to a Base Station without cables (NLOS, PmPt), RF principles are basically the same and are covered under this course. These same principles can be applied in various formats, at different frequencies or manipulated to give birth to new standards. You will learn to configure Base Stations for Non Line of Site (NLOS) operations with Customer Premise Equipment (CPEs); you will learn to configure Radios for Point to Point communication, say between a branch office and its head office; you will learn to Design such RF networks, before implementation.

At the end of the training, you would have covered the curriculum for the Certified Wireless Network Administrator, CWNA, and be qualified to write the certification exam.

Starting Monday-feb 22-2016

Course outline for Transmission Engineering

VSAT: Installation & Configuration leading to CSI
• Theory of Satellite Communication, Assembling of VSAT Hardware from LNA, Feedhorn, BUC, etc. Installing VSAT: Setting Azimuth, Elevation Using Compass & Inclinometer. Terminating & Connecting the Feeder Cables. Entering & Configuring the Modem, Tracking the Satellite. Commissioning the VSAT.

Introduction for Optical Fibre
• Couplers, Connectors. Multi-mode, single-mode, Pigtails, Patch Cords, etc. Demonstration of Use of Fibre Toolkit, Media Converter, etc. Implementation of Fibre Optics for LANs.

VoIP & VPN Design and Configuration
• Installation & Configuration of VoIP Gateways. Assigning Telephone Nos to Phones. Demonstration of Calls on Wired Network. Concepts, Protocols & Implementation of VPNs.

Installing MW Radios, PDH, SDH Links


Introduction to GSM Engineering
• GSM Radio & Switches. GSM Fundamentals. Introduction to GPRS, UMTS, etc. Upgrade of 2G to 2.5G to 3G & 4GLTE Networks.

RF Planning & Implementation leading to CWNA
• RF Planning using Modelling Tools Software, RF Site Survery. Installing & Connecting Antennas for 2.4GHz RF. Entering & Navigating Radios. Basic Radio Configuration.

ISP Base Station Configuration
• Base Station Hardware Installation, Installing Network Software, Configuring IP Settings.

.WIMAX Network Configuring 2.4 & 5GHZ Radios for Power Station 5
• Configuring VLANs. Configuring Base, Station as Access Point, Wireless, Bridge, Repeater, WDS. Configuring, Security. Configuring Firewall & NAT., Configuring WAN Parameters.

90% practicals,ON-SITE Training.

You can also Enroll for our CCNP Training.

Contact Us at Keltech-Communications,1 Adekunle Araba Street,off chemist b/s,Okota Isolo lagos.
+234-8033052996.

1 Month Certified RF/Transmission Engineering Training


RF Engineering

More and more people want to remain mobile while still connected to network resources. A typical example here is the wireless connection between our mobile phones and operators’ Base Stations. This concept of wireless (RF) is very wide and is covered under our RF Engineering training.

From scenarios as simple as connecting LANs in two offices together using radios and antennas in a LOS, Point to Point architecture; to complex scenarios of connecting thousands of handsets to a Base Station without cables (NLOS, PmPt), RF principles are basically the same and are covered under this course. These same principles can be applied in various formats, at different frequencies or manipulated to give birth to new standards. You will learn to configure Base Stations for Non Line of Site (NLOS) operations with Customer Premise Equipment (CPEs); you will learn to configure Radios for Point to Point communication, say between a branch office and its head office; you will learn to Design such RF networks, before implementation.

At the end of the training, you would have covered the curriculum for the Certified Wireless Network Administrator, CWNA, and be qualified to write the certification exam.

Starting Monday-feb 29-2016

Course outline for Transmission Engineering

VSAT: Installation & Configuration leading to CSI
• Theory of Satellite Communication, Assembling of VSAT Hardware from LNA, Feedhorn, BUC, etc. Installing VSAT: Setting Azimuth, Elevation Using Compass & Inclinometer. Terminating & Connecting the Feeder Cables. Entering & Configuring the Modem, Tracking the Satellite. Commissioning the VSAT.

Introduction for Optical Fibre
• Couplers, Connectors. Multi-mode, single-mode, Pigtails, Patch Cords, etc. Demonstration of Use of Fibre Toolkit, Media Converter, etc. Implementation of Fibre Optics for LANs.

VoIP & VPN Design and Configuration
• Installation & Configuration of VoIP Gateways. Assigning Telephone Nos to Phones. Demonstration of Calls on Wired Network. Concepts, Protocols & Implementation of VPNs.

Installing MW Radios, PDH, SDH Links


Introduction to GSM Engineering
• GSM Radio & Switches. GSM Fundamentals. Introduction to GPRS, UMTS, etc. Upgrade of 2G to 2.5G to 3G & 4GLTE Networks.

RF Planning & Implementation leading to CWNA
• RF Planning using Modelling Tools Software, RF Site Survery. Installing & Connecting Antennas for 2.4GHz RF. Entering & Navigating Radios. Basic Radio Configuration.

ISP Base Station Configuration
• Base Station Hardware Installation, Installing Network Software, Configuring IP Settings.

.WIMAX Network Configuring 2.4 & 5GHZ Radios for Power Station 5
• Configuring VLANs. Configuring Base, Station as Access Point, Wireless, Bridge, Repeater, WDS. Configuring, Security. Configuring Firewall & NAT., Configuring WAN Parameters.

90% practicals,ON-SITE Training.

Contact Us at Keltech-Communications,1 Adekunle Araba Street,off chemist b/s,Okota Isolo lagos.
+234-8033052996,08067779880.