How to set a user level for Huawei switches? Maybe that’s easy for a practised hand, but it’s a little hard for a beginner, if you don’t know the command.

Methods for Set a User Level for Huawei Switches, you can also apply for S9300 switch,S9700 switch.

When password authentication or none authentication is used, use the following method to set a user level. Take the VTY user interface as an example.

<HUAWEI> system-view

[HUAWEI] user-interface vty 0

[HUAWEI-ui-vty0] user privilege level 15 //Set the user level to 15 for the VTY 0 user interface.

When AAA authentication is used, use the following methods (in descending order of priorities) to set a user level. Take the VTY user interface as an example.

Set a user level for a single user.

<HUAWEI> system-view

[HUAWEI] aaa

[HUAWEI-aaa] local-user user1 privilege level 15 //Set the user level of user1 to 15.

Set a user level for all users in a domain.

<HUAWEI> system-view

[HUAWEI] aaa

[HUAWEI-aaa] service-scheme sch1

[HUAWEI-aaa-service-sch1] admin-user privilege level 15 //Set the user level to 15.

[HUAWEI-aaa-service-sch1] quit

[HUAWEI-aaa] domain domain1

[HUAWEI-aaa-domain-domain1] service-scheme sch1 //Bind the service scheme sch1 to domain1.

Set a user level for all users that log in through a specified user interface.

<HUAWEI> system-view

[HUAWEI] user-interface maximum-vty 15 //Set the maximum number of VTY user interfaces to 15.

[HUAWEI] user-interface vty 0 14 //Enter the VTY user interfaces VTY 0 to VTY 14.

[HUAWEI-ui-vty0-14] user privilege level 15 //Set the user level to 15 for the VTY user interfaces VTY 0 to VTY 14.

Contact information:

Telephone: 852-30623083

Email: [url=Sales@Thunder-Link.com]Sales@Thunder-Link.com[/url]

[url=Supports@Thunder-link.com]Supports@Thunder-link.com[/url]

Website: http://www.thunder-link.com
More related:
MA5600T Series Networking Protection Feature
MA5600T Multicast Feature Glance
MA5600T Series Maintenance Feature Glance
Different VLAN with the same IP address segment communicate through the layer three switches