New tractors in use, should do the following aspects of the work, which is to ensure the normal operation of tractors, an important measure to extend the service life.

Tighten the connectors
Tractor factory inspection though the factory, but in the process of repeated transport, the machine is bound to loose connection phenomenon. To this end, should be promptly tightened all kinds of connectors and fasteners, especially the steering system, brake system, suspension and wheels and other parts.

Check the liquid level
Mainly fuel tank surface, tank surface, transmission and rear axle lubricating oil surface, and the battery electrolyte level. Found that the lack of liquid, it is timely to add liquid material.

Check the oil
The main oil should be checked the following: the amount of oil in the oil pan should be not less than the oil gauge ruler; if the tractor factory when the summer, and bought back when the winter should be replaced with winter oil, and vice versa However, large oil traps on the oil filter switch, should be the season or the temperature to the 'summer' or 'winter' position; some manufacturers in order to avoid the oil bath oil filter oil pan in the oil Transport process spilled out contaminated car capacity, and in the factory did not add, buy back should pay attention to add oil.

Running
Is to let the new machine speed from low to high, the load from small to large, through the gradual process of operation, the gears, shafts and other friction surface of the processing traces of polished and become more seam. Running on the extension of the life of the part has an important role, do not save trouble, ignoring the running-in process, otherwise it will be lost, causing damage to the machine in advance.