Tips And Tricks

How to download paid apps for free

Method 1st:-

In this method you have to download an apps name Blackmart Alpha which helps you to download any android app from Google Play store which is paid. Mostly all paid apps are successfully work sometime you may got error.
► First of Download BlackMart Alpha
► Now Install it on your Android Phone.
► Now Open Black mart and in the search box enter the name of that app.
► Now Download that particular app through BlackMart on your Android Device.
► Now your Paid Apps is working successfully.


Method 2nd:-
In this method you have to download apps from some famous websites which are in the form of .apk extension and then you have to transfer them from PC to mobile.
► Firstly you have to visit 4shared.com or mediafire.com on your PC or your can also install their apps on your mobile phone.
► Now open these sites and you have to search the exact name of particular apps which you want to download in the format of Appsname.apk. Don’t forget to enter the extension name .apk at the end.
► Now download the apps from that site on your PC or laptop and transfer them on mobile phone.
► Now install them on your phone and enjoy your new paid apps.
In the end of this trick i only say sometime some apps may or may not work so please try it will any another apps because their is no chance any failure of this trick. I hope you find this trick amazing and working.

How To Hack WiFi

Do you want to test your network security? Or you want to use the wifi of your neighbour and you do not know the password,Then here is the method to get the password.

Method 1 of 2: WEP Routers

1:Root a compatible device.
Not every Android phone or tablet will be able to crack a WPS PIN. The device must have a Broadcom bcm4329 or bcm4330 wireless chipset, and must be rooted. The Cyanogen ROM will provide the best chance of success. Some of the known supported devices include:
• Nexus 7
• Galaxy S1/S2/S3/S4/S5
• Galaxy y
• Nexus One
• Desire HD
• Micromax A67

2:Download and install bcmon.
This tool enables Monitor Mode on your Broadcom chipset, which is essential for being able to crack the PIN. The bcmon APK file is available for free from the bcmon page on the Google Code website.
► To install an APK file, you will need to allow installation from unknown sources in your Security menu. Step 2 of this article goes into more detail.

3:Run bcmon.
After installing the APK file, run the app. If prompted, install the firmware and tools. Tap the Enable Monitor Mode option. If the app crashes, open it and try again. If it fails for a third time, your device is most likely not supported.
► Your device must be rooted in order to run bcmon.

4:ap Run bcmon terminal.
This will launch a terminal similar to most Linux terminals.Type command=>airodump-ng and tap the Enter button. AIrdump will load, and you will be taken to the command prompt again. Type command=>airodump-ng wlan0 and tap the Enter button.

5:Identify the access point you want to crack.

You will see a list of available access points. You must select am access point that is using WEP encryption.

6:Note the MAC address that appears.
This is the MAC address for the router. Make sure that you have the right one if there are multiple routers listed. Jot this MAC address down.
► Also note the Channel that the access point is broadcasting on.

Start scanning the channel.
You will need to collect information from the access point for several hours before you can attempt to crack the password. Type command=> airodump-ng -c channel# --bssid MAC address -w output ath0 and tap Enter. Airodump will begin scanning. You can leave the device for a while as it scans for information. Be sure to plug it in if you are running low on battery.
► Replace channel# with the channel number the access point is broadcasting on (e.g. 6).
► Replace MAC address with the MAC address of the router (e.g 00:0a:95:9d:68:16)
► Keep scanning until you reach at least 20,000-30,000 packets.

8:Crack the password.
Once you have a suitable number of packets, you can start attempting to crack the password . Return to the terminal and type command=>aircrack-ng output*.cap and tap Enter.


9:Note the hexadecimal password when finished.
After the cracking process is complete (which could take several hours), the message Key Found! will appear, followed by the key in hexadecimal form. Make sure that Probability is 100% or the key will not work
► When you enter the key, enter it without the :. For example, if the key was 12:34:56:78:90, you would enter 1234567890.

For the remaining tricks pls visit here now

http://www.gisttrend.tk/2017/10/hot-useful-and-easy-hacking-tricks-for.html?m=0