MEAT PROCESSING TECHNOLOGY
Meat processing technology comprises the steps and procedures in the
manufacture of processed meat products . Processed meat products, which include various different types and local/regional variations, are food of animal origin, which contribute valuable animal proteins to human diets. Animal tissues, in the first place muscle meat and fat , are the main ingredients, besides occasionally used other tissues such as
internal organs , skins and blood or
ingredients of plant origin .
All processed meat products have been in one way or another physically and/or chemically treated. These treatments go beyond the simple cutting of meat into meat cuts or meat pieces with subsequent cooking for meat dishes in order to make the meat palatable. Meat processing involves a wide range of
physical and chemical treatment methods, normally combining a variety of methods. Meat processing technologies include:
Cutting/chopping/comminuting (size reduction)
Mixing/tumbling
Salting/curing
Utilization of spices/non-meat additives
Stuffing/filling into casings or other containers
Fermentation and drying
Heat treatment (see separate chapter page 87)
Smoking
EQUIPMENT USED IN MEAT PROCESSING
In modern meat processing, most of the processing steps can be mechanized. In fact, modern meat processing would not be possible without the utilization of specialized equipment. Such equipment is available for small-scale, medium-sized or large-scale operations. The major items of meat processing equipment needed to fabricate the most commonly known meat products are listed and briefly described hereunder.
Meat grinder (Mincer) (see also page 301)
Fig. 19: Schematic drawing of grinder
A meat grinder is a machine used to force meat or meat trimmings by means of a feeding worm (auger) under pressure through a horizontally mounted cylinder (barrel). At the end of the barrel there is a cutting system consisting of star-shaped knives rotating with the feeding worm and stationary perforated discs (grinding plates). The perforations of the grinding plates normally range from 1 to 13mm. The meat is compressed by the rotating feeding auger, pushed through the cutting system and extrudes through the holes in the grinding plates after being cut by the revolving star knives. Simple equipment has only one star knife and grinder plate, but normally a series of plates and rotary knives is used. The degree of mincing is determined by the size of the holes in the last grinding plate. If frozen meat and meat rich in connective tissue is to be minced to small particles, it should be minced first through a coarse disc followed by a second operation to the desired size. Two different types of cutting systems are available, the “Enterprise System” and the “Unger System”:
Fig. 20: Grinder: Worm feed (feeding worm/auger) and cutting set with plates and knives (system "Unger"
The “Enterprise System” (Fig. 19) is mainly used in smaller meat grinders with orifice diameters up to 98 mm and consists of one star knife, sharpened only on the side facing the disc, and one grinder plate. Hole diameters can vary from 13 to 5 mm.
The “Unger System” (Fig. 20) is used in meat grinders with orifice diameters up to 440 mm and consists of the kidney plate, one or two star knives sharpened on both edges and one or two grinder plates. For a final particle size above 8 mm the recommended setting is kidney plate – star knife – grinder plate. For a final particle size <8 mm the recommended setting is kidney plate – star knife – grinder plate (13 mm) – star knife – grinder plate (6 to 1 mm) (Fig. 21).
Fig. 21: Grinder plates of different hole size, star knives and spacer rings for tightening of cutting assembly
The smallest type of meat grinder is the
manual grinder (Fig. 22) designed as a simple stuffing grinder, i.e. meat material is manually stuffed into the feeder. For all these small machines the Enterprise cutting system is used with one star knife and one grinder plate. These machines are very common everywhere in food processing but their throughput and production capacity is limited due to the small size and manual operation.
The intermediate size meat grinder, also designed as a stuffing grinder, has orifice diameters up to 98 mm. It is driven by a built-in single-phase electrical motor (250 V) and available as both a table and floor model. The meat is put onto the tray and continuously fed by hand into a vertical cylindrical hole leading to the feed auger. The meat or fat is forced by its own weight into the barrel with the rotating feed auger. This type of meat grinder is the most suitable for commercial small-scale operations. Some brands use the Enterprise cutting system, others the Unger system (Fig. 23, 24).
Fig. 22: Manual grinder Fig. 23: Grinder as table model Fig. 24: Grinder as floor model
Large industrial meat grinders are driven by a three-phase electrical motor (400 V) and equipped with the Unger cutting system. The orifice cylinder diameter of this type of grinder ranges from 114 - 400 mm. Industrial grinders are either designed as stuffing grinders with either tray or hopper or as an automatic mixing grinder. The automatic mixing grinder has a big hopper and the meat falls automatically onto the mixing blades and the feeding worm (auger). The mixing blades and feeding worm can be operated independently with mixing blades rotating in both directions but the feeding worm only towards the cutting set. Most of the industrial meat grinders are also equipped with a device for separating tendons, bone particles and cartilage.
Bowl cutter (bowl chopper) (see also page 303)
The bowl cutter (Fig. 25, 26, 28, 29) is the commonly used meat chopping equipment designed to produce small or very small (“finely comminuted”) lean meat and fat particles. Bowl cutters consist of a horizontally revolving bowl and a set of curved knives rotating vertically on a horizontal axle at high speeds of up to 5,000 rpm. Many types and sizes exist with bowl volumes ranging from 10 to 2000 litres. The most useful size for small- to medium-size processing is 20 to 60 litres. In bigger models bowl and knife speed can be regulated by changing gears. Bowl cutters are equipped with a strong cover. This lid protects against accidents and its design plays a crucial role in the efficiency of the chopping process by routing the mixture flow. Number, shape, arrangement, and speed of knives are the main factors determining the performance of the cutter (see page 304). Bowl cutters should be equipped with a thermometer displaying the temperature of the meat mixture in the bowl during chopping.
Fig. 25: Small 20 litre bowl cutter, single-phase motor Fig. 26: Bowl cutter assembled with 6 knives
Fig. 27: Bowl cutter, schematic Fig. 29: Bowl cutter–grinder combination (twin model) with bowl cutter (60 liters capacity) and meat grinder (114 mm orifice diameter)
Fig. 28: Bowl cutter filled with meat for chopping Fig. 30: Vacuum cutter; lid can be hermetically closed for vacuum treatment of batter in the bowl
Modern large scale bowl cutters may have devices to operate under a vacuum (Fig. 30), which helps to improve colour and texture of the meat products by keeping oxygen out of the meat mixes and avoid air pockets. Cutter knives should be adjusted to a distance of 1-2 mm from the bowl (Fig. 27) for optimal cutting (check the manufacturers recommendations for each model). Most of the large and high-speed bowl cutters are equipped with mechanical discharger devices for emptying the cutter. The process of chopping in a bowl cutter is used for producing fine comminuted products such as frankfurters, bologna, liver sausage etc., and enables processors to offer a much wider range of products.
Filling machine (“sausage stuffer”)

for more information or enquiry call
Samuel moronfade meat processing consultant Nigeria on tel. 08020685390 WhatsApp.
email.. smoronfade@yahoo.com