₦airaland Forum

Weldone. How much clear a 2011 Nissan versa and a 2009 Toyota matrix from tin can

Pathetic. A senator of the federal republic riding okada without helmet

He may not need to throw any punch. All he will do is to recite a little incantation and Larry will drop down comatose

@geesampower - Wonderful thread. One of the very best. Thumbs up.
Can one build his solar power capacity over time? For example starting with 1kVA capacity in the first year, then in the second year investing some money and increasing capacity to 2KVA, then do this over again after some time till you get to the capacity you want? If this is possible, how can one go about it? What will be your advice?

peaceland:
since you mentioned rotecch in earlier post, can it be assumed you dealt with a rotecch sir?

I found out the fault is entirely mine. Sorry for the mixup. I have since removed my comment.

I had saved two numbers on my phone. One of them was definitely rotech's number. The other number belonged to another fitting guy on nairaland. I made up my mind to contact rotech for my fittings. I picked one of the two numbers and started discussion. I did not verify the identity of the guy (my mistake). I sent the guy's number to some other senior and respectable nairaland members for verification. Few of them said they already did some transactions with the guy and he is reliable. I decided give him a shot by doing a small deal. We agreed on supply of some fittings for close to 450k. Guy delivered. I was happy with the delivery.

@rotecch77 - Apologies for the mixup. Deal was supposed to be for you. Somehow it was not meant to be. Fault was
mine. I think the recommendation of him I got made me loose my guard. I may do subsequent ones together with you.

@Hajj M - Very funny situation. I feel stupid.

rotecch77:
Real impersonation,

WHAOOO. Mix up. Its either my pictures go to a different thread or somebody impersonated rotech. I am wondering what is happening myself. Funny enough the guy is pretty honest. I will findout what is happening and correct the errors.

.....

Ministers are more powerful. They can steal more money

What is the price per square meter of stone cladding

How much will deliver 03 nissan almera to ibadan

Macby:
A palet covers 12sqm. A palet is N27600
Yes we do installation.

Great. My project is at this stage and I am seriously considering this option. Can you please educate us on the instalation aspect. Why some interlocking stones change colour after some time? Why weed grows in between the tiles? Cost implications when compared with other options? Advantages? Comparison with stamped concrete? Etc

Macby:
Are you seeking for quality and you’re into construction of roads for highways, estates, residential homes, parking lots and pedestrian way. We offer the best of interlocking stones in Nigeria of different shapes and sizes that stands the test of time. Our stones are produced with the best of materials and are fully vibrated and produced with the best of indusial machines, giving our stones the required strength of 30 mpa and above. We also produce blocks for building. We supply to all part of the country and can meet up any supply demand. Our prices are friendly and affordable. For more info pls contact.
Mr joseph
08060341952

How many square meters of land will one pallet cover? How much does a pallet goes for? Do you also do installation?

HsLBroker:
i sent your quotation

Sure. Got the quote. Sorry for replying late. Will contact you soon

Promes:
Yes, they can be installed after screeding. Its usually better to install before wall screeding though, due to the mess it may give off while installing.

Plastering comes before screeding, and screeding before painting. Installation requires that subframes be installed before the doors come in. The subframes vary in widths.These need to be installed and plastered to fill up the holes created. After plastering the areas around and within the subframe to give it strength and hold it in place, the door frame is then installed. After this, the door comes in.

If screeding has been done and there is a subframe installed already, then yes, the door can be installed afterwards. If screeding has been done and the subframe has not been installed yet, the door can still be installed. It would just be additional effort in installing the subframes, replastering the areas around it, and then installing the door frames.

There is however a replacement for subframes. It is a spray foam used in installing doors that have past subframe level or used by clients who do not want to use subframes or used in cases of emergency installation where, like in your question, screeding has been done and you want to avoid the stress of installing the subframes. The wall edge is scratched off to give it a rough finish for rigidity, and the foam is sprayed on the wall. The door frame is then glued to the foam and the door is hung on.

If your subframe was installed before screeding, door installation can be done easily. If it was not, then you would have to go through the whole process, or ypou could use the spray foam installation method substitute.

Thanks so much for this explanation. Very informative. My project is at the plastering stage and I am looking at buying my internal doors from you. Do you sell subframe separately or everything comes together with the door?. Can I buy only the subframes now from you and go ahead with installation and plastering and then get the full doors later? Or better still, can you please futher explain the difference between subframe and door frame. I am a little bit confused here. Thanks

Promes:
Thank you for your interest in us. We can come in before or after the tiling. However, it is better to come in after tiling is done as this enhances our precision in installation.

Can the door frames and the door be installed after wall screeding too? Please educate us.

Promes:
No we didn't. That is an architectural rendering effect. It is a wallpaper applied to the existing wall. It can be purchased from vendors who deal in it. It goes for N8000 per roll is we are to handle it.

Please how durable is this wallpaper. What material is it made from? How long will it last? Is it something that I will have to change from time to time?. I am really interested in this one.

Sent an e-mail to you yesterday requesting for quote for my project. Please reply. I need to take a quick decision on this.

HsLBroker:
ok you are welcome sir

Sent an e-mail to you yesterday requesting for quote for my project. Please reply. I need to take a quick decision on this.

HsLBroker:
i will like to know if you have a parapet attach to your roof or we are using facebook

i will like to know if you are using stone, stepped tiles or long span roofing sheets,

my suggested height for your king post is 12ft

regards
ADENIYI

Thanks for your suggestion. I intend using stone coated roofing tiles. Parapet works now in progress.

HsLBroker:
yes sir, even beyond ibadan I left fiditi, oyo, oyo state, a day before yesterday I'm in benin now

My building measures 17.5meters by 11meters. What height will you suggest for the kingpost of the roof. Thanks

Good price for the stone coated roof tiles pictured above. I am seriously considering them for my project. Which manufacturer makes these? Where can I see some samples?

Do you do projects in Ibadan?

I asked a welder to do a 5 feet and a 3 feet security door for one of my three bedroom bungalow. I choose a particular good and catchy design in his pictures and I paid fairly well. I cried when I see the quality of the finish. Horrible!. I quickly reserved the 5 feet one for the generator house. Our welders are a long way off though some are trying. Never will I allow myself to be bamboozled again. Foreign doors still ranks as the best in terms of finish.

Oga muyesky. Is it possible to do Sliding Windows with Burglary embedded. I have only seen casement windows with burglary in this thread.

Oga muyesky. Is it possible to do Sliding Windows with Burglary. I have only seen caement windows with burglary in this thread.