abdulwastecx:
here is the floor plan

Pls I am studying the creative nature of the plan and I really want to know if u used Photoshop for the rendering of the floor plan. Or what did you use to make each area(bedroom, lobby, etc) colourful ? In print will these colourful layer show ?


Also, u said you are gonna use 225mm headcourse and went further to say the headcourse simply means the concrete beam holding rafters and ties. I am in disarray, so u mean the headcourse is on the lintel ? Or the lintel is the head course ?

Miscellaneous:


Pls I am studying the creative nature of the plan and I really want to know if u used Photoshop for the rendering of the floor plan. Or what did you use to make each area(bedroom, lobby, etc) colourful ? In print will these colourful layer show ?


Also, u said you are gonna use 225mm headcourse and went further to say the headcourse simply means the concrete beam holding rafters and ties. I am in disarray, so u mean the headcourse is on the lintel ? Or the lintel is the head course ?

I use '' color scheme " on revit architecture. It is a tool on revit.

Head course is a concrete layer after lintel. It is done after two course of block has been layer on top of the linel

abdulwastecx:


I use '' color scheme " on revit architecture. It is a tool on revit.

Head course is a concrete layer after lintel. It is done after two course of block has been layer on top of the linel

please I need the cost breakdown
setting out:number of pegs, profile boards etc..
excavation work:required depth
foundation footing:volume of concrete, cement needed, sand and gravel
substructure:no of blocks, cement, sand...
dpc:cement, sand, gravel, nylon
dpc to rooflevel.
number of footing,pillars/rods, links, needed.cement, sand and gravel needed for casting
and also reinforcement for casting lintel cemnet sand and gravel
formwork
AND ANY OTHER NECCESSARY COST
all am trying to say is say PLEASE I need a very simple breakdown and proper explanation of d analysis and cost estimate of d building.
Thanks for ur anticipated cooperation.

Hiibeek:


please I need the cost breakdown
setting out:number of pegs, profile boards etc..
excavation work:required depth
foundation footing:volume of concrete, cement needed, sand and gravel
substructure:no of blocks, cement, sand...
dpc:cement, sand, gravel, nylon
dpc to rooflevel.
number of footing,pillars/rods, links, needed.cement, sand and gravel needed for casting
and also reinforcement for casting lintel cemnet sand and gravel
formwork
AND ANY OTHER NECCESSARY COST
all am trying to say is say PLEASE I need a very simple breakdown and proper explanation of d analysis and cost estimate of d building.
Thanks for ur anticipated cooperation.

This is a big job... It will take a lot of energy to get it done. You will have to pay

abdulwastecx:


I use '' color scheme " on revit architecture. It is a tool on revit.

Head course is a concrete layer after lintel. It is done after two course of block has been layer on top of the linel

Good day Sir,
Please, is the head course necessary in buildings? I've seen a structure (the building I presently live in) that was done without a head course. The wall plates lie directly on the topmost coaches of block. If that is a bad job, what is the likely effect it will have on the structure?
Awaiting your response.

abdulwastecx:


This is a big job... It will take a lot of energy to get it done. You will have to pay

Good day sir,

I am a recent graduate with HND in Civil Engineering, I have up to two years working experience in the construction and real estate sector and finished my NYSC last October.

I am proficient in the use of AutoCAD for drafting, Microsoft office packages, social network platforms, site supervision, quantity estimation and I can communicate orally and verbally.

I just need an opportunity to be in the industry in order to gain more experience and not to stay idle. I won't mind little financial assistance though.

I can be reached on 0813 513 4212 or huthman27@gmail.com for my RESUME.

abdulwastecx:


This is a big job... It will take a lot of energy to get it done. You will have to pay

just wanna have an idea of d cost
and since its wat u have been doing
wouldn't hurt to help

What is the cement to sand mix ratio when producing a standard hollow block of 9" or 6" ?

abdulwastecx:
ELEMENT 3: Foundation concrete work
perimeter of foundation = 120m
width of strip footings = 0.675m
depth of foundation footing = 0.225m

Volume of concrete = 120 x 0.675 x 0.225 = 18.225m3
using a mix ratio of 1:3:6

part of cement = 1/9 x 18.225 x 1506/50 = 61bags ( 75bags) = N150,000

part sand = 3/9 x 18.225 x 1.6/10 = 0.972 ( 1 trip of four bucket sharp sand) = N30,000

part of gravel = 6/9 x 18.225 x 2.4/30 = 1 trip of 30tonnes 3/4 gravel = N220,000

workmanship = N60,000

Total = N460,000

Please i don't understand d estimating part I.e the 1506/50....1.6/10

abdulwastecx:
foundation block work
perimeter of work = 120m
No of course = 5 courses ( 1.2m)
No of blocks = 120/0.45 x 5 = 1300 blocks (1,500blocks)

225mm (9" block @ N155/nr = N232,500
number of bag of cement required to lay the blocks, assuming 50blocks /bag of cement = 30bags = N60,00

workmanship @ N60/nr = N 120,000
Total = N 412,500

Please /nr means......??

chubbyG:




Please /nr means......??

nr = means number of blocks

Pls house I need serious criticism on this floor plan

chubbyG:



Please i don't understand d estimating part I.e the 1506/50....1.6/10

1506 = density of cement
50 kg = weight of one bag of cement

1.6 = relative density of sharp sand

ikemeneke:
Pls house I need serious criticism on this floor plan

where is the entrance between the setting room to study room, or kitchen?

ikemeneke:
Pls house I need serious criticism on this floor plan

If you want accurate critism, include dimensions

podosci:

If you want accurate critism, include dimensions

pls check the two plans :plan A and Plan B, which one is better?

abdulwastecx:
ELEMENT 3: Foundation concrete work
perimeter of foundation = 120m
width of strip footings = 0.675m
depth of foundation footing = 0.225m

Volume of concrete = 120 x 0.675 x 0.225 = 18.225m3
using a mix ratio of 1:3:6

part of cement = 1/9 x 18.225 x 1506/50 = 61bags ( 75bags) = N150,000

part sand = 3/9 x 18.225 x 1.6/10 = 0.972 ( 1 trip of four bucket sharp sand) = N30,000

part of gravel = 6/9 x 18.225 x 2.4/30 = 1 trip of 30tonnes 3/4 gravel = N220,000

workmanship = N60,000

Total = N460,000

Oga, how did you come about the 10 and 30 @ the bolded? Also, why did you divide the ratios by 9 instead of 10 (1+3+6)?

good job

how far has this project gone and how much is spent so far?

yak:
how far has this project gone and how much is spent so far?

Up to lintel level.
About 1.8m so far

abdulwastecx:

Up to lintel level. About 1.8m so far

more Grace bro. hope we get pictures soon

please, what software was used for the 3d designs?

abdulwastecx:

yes sir, I'm doing ok just that i have been alitle busy

Perfect plan

hey man, is this the end of the total cost of the project?

Good job u r doing here

abdulwastecx:


I use '' color scheme " on revit architecture. It is a tool on revit.

Head course is a concrete layer after lintel. It is done after two course of block has been layer on top of the linel

Gifted

Good work please send me to floor plan of this 3bedroom flat

kindly update on on the progress of work on this site.

whats the update on this project

I find this content very useful and insightful thanks to abdulwastecx for this write-up.