Hello everyone,
I have been trying to nail 32e bird, even though I get 78% signal quality with my 90cm using 11015H3000 but each time I blind scan I still couldn't get the gallywood channels among other channels received.
For this particular 11015(H)30000 TP I only get Nuru TV, Nyota Tv, Eagle Tv etc.
Pls guys is there something I'm not getting right.

amnolimit:
Hello everyone,
I have been trying to nail 32e bird, even though I get 78% signal quality with my 90cm using 11015H3000 but each time I blind scan I still couldn't get the gallywood channels among other channels received.
For this particular 11015(H)30000 TP I only get Nuru TV, Nyota Tv, Eagle Tv etc.
Pls guys are there something I'm not getting right.

You are sitting on the wrong satellite position.

amnolimit:
Hello everyone,
I have been trying to nail 32e bird, even though I get 78% signal quality with my 90cm using 11015H3000 but each time I blind scan I still couldn't get the gallywood channels among other channels received.
For this particular 11015(H)30000 TP I only get Nuru TV, Nyota Tv, Eagle Tv etc.
Pls guys is there something I'm not getting right.

Nail 28e first the move your dish a little above it with that tp or after tracking 28e use another lnb to search for it immediately above 28e

emmaniche:

Hit me up on 08165471453

Ok

amnolimit:
Hello everyone,
I have been trying to nail 32e bird, even though I get 78% signal quality with my 90cm using 11015H3000 but each time I blind scan I still couldn't get the gallywood channels among other channels received.
For this particular 11015(H)30000 TP I only get Nuru TV, Nyota Tv, Eagle Tv etc.
Pls guys is there something I'm not getting right.

What part of Africa are you?

amnolimit:
Hello everyone,
I have been trying to nail 32e bird, even though I get 78% signal quality with my 90cm using 11015H3000 but each time I blind scan I still couldn't get the gallywood channels among other channels received.
For this particular 11015(H)30000 TP I only get Nuru TV, Nyota Tv, Eagle Tv etc.
Pls guys is there something I'm not getting right.

Your matter is very easy to resolve. First off is that 28.2 degree east has channels transmitting on that same frequency.

Which is still a plus for you because all you have to do is simply slid your dish between one to two inches down and that same tp will still pop up signal.


At that point you can align your dish to give you the best signal possible.

Scan again and the station you are looking for will come up.


Once again, all you have to bear in mind is that the frequency 11015 H 30000 will give you signal, in two exact position along that axis.

The first one that pops up signal as you are sliding your dish down is 28.2 ( joy tv position) and the second that pops up signal as you move your dish a little more downwards is 32.9/33 degree east ( Ourtv Ghana position)

Furthermore, you can still use the below method.

In your tracking device.... Input these two frequencies

11015 H 30000
12522 V 30000

So when you track with 11015 H 30000 , check if 12522 V 30000 gives you signal. If it does, then you're still in 28.2 degree east, slid your dish down and if at this point only 11015 H 30000 gives you signal and 12522 V 30000 is red or off. Then you are most likely on the right sat.

Which ever method you choose to try all that counts is you getting the results you desire. Good luck.

@Digitman, @dlollyboi, @harizonal123, @WaytoGo
Thank you very much everyone, I will give it a try again today.

@dlollyboi I'm in South West Nigeria

PS: I'm using SRT 4922 decoder, I hope that's not part of the issue.

Gurus in the building I need your input on this, I tried using one lnb to nail 28e, 26e and 32 using 90cm but I was only able to nail 28 and M7, while 32e was still giving 28 channels. So I want to use 28 as primary where will 26, 32, 42.5 and 51.5 be placed I means those that will be placed ontop and the bottom.

amnolimit:
@Digitman, @dlollyboi, @harizonal123, @WaytoGo
Thank you very much everyone, I will give it a try again today.

@dlollyboi I'm in South West Nigeria

PS: I'm using SRT 4922 decoder, I hope that's not part of the issue.

That's not an issue

GuntersChain:
Gurus in the building I need your input on this, I tried using one lnb to nail 28e, 26e and 32 using 90cm but I was only able to nail 28 and M7, while 32e was still giving 28 channels. So I want to use 28 as primary where will 26, 32, 42.5 and 51.5 be placed I means those that will be placed ontop and the bottom.

26 below
32, 42.5, 51.5 Above in ascending order

GuntersChain:
Gurus in the building I need your input on this, I tried using one lnb to nail 28e, 26e and 32 using 90cm but I was only able to nail 28 and M7, while 32e was still giving 28 channels. So I want to use 28 as primary where will 26, 32, 42.5 and 51.5 be placed I means those that will be placed ontop and the bottom.

You can't use 1 lnb to nail those 3sats!

dlollyboi:

26 below
32, 42.5, 51.5 Above in ascending order

Thanks I do appreciate.

dlollyboi:

You can't use 1 lnb to nail those 3sats!

Please is there any software I can use to update my 4922a receiver?
It's running on 2014 software and I notice that whenever I tracked Tstv, the Tv channels pops as radio channels without picture.

Avedonn:


Please is there any software I can use to update my 4922a receiver?
It's running on 2014 software and I notice that whenever I tracked Tstv, the Tv channels pops as radio channels without picture.

It's not something a software can fix. Because it's a hardware issue.

Your decoder is encoded with a H264 hardware. So you will need a decoder that is encoded on H265 hardware, should you choose to receiver channels transmitting on that format

showietee:


My Oga at the top.... Been ages I see you at the other end

I dey see you. You and that your in-law - AKIN... .

dlollyboi:
You can't use 1 lnb to nail those 3sats!

noted

Digitman:


In your tracking device.... Input these two frequencies

11015 H 30000
12522 V 30000

So when you track with 11015 H 30000 , check if 12522 V 30000 gives you signal. If it does, then you're still in 28.2 degree east, slid your dish down and if at this point only 11015 H 30000 gives you signal and 12522 V 30000 is red or off. Then you are most likely on the right sat.

Which ever method you choose to try all that counts is you getting the results you desire. Good luck.

This is what I have as you've suggested but still the same result. Pls what could possibly be wrong?
Thanks

Tvc stopped showing on nigcomsat

amnolimit:


This is what I have as you've suggested but still the same result. Pls what could possibly be wrong?
Thanks

Remember I gave you two methods and each still suggest that you have to take your dish downwards.

So considering that you are yet to get what you are looking for, still suggest that you have to move your dish a little more down.

Two things are involve, your ability to distinguish the two points in which that frequency pop up signal. The second one that came up when you slid your dish a little down and move slightly to your left while standing behind your dish. Should be that of 32.9/ 33 degree east.

idris4r83:
Tvc stopped showing on nigcomsat

Use this ;

Tvc Changed tp on Nigcomsat.

12735 V 9160

WaytoGo:


Use this ;

Tvc Changed tp on Nigcomsat.

12735 V 9160

thanks bro I really appreciate.

Digitman:
It's not something a software can fix. Because it's a hardware issue.

Your decoder is encoded with a H264 hardware. So you will need a decoder that is encoded on H265 hardware, should you choose to receiver channels transmitting on that format

Okay thanks. But which of the strong decoder is encoded with H265?

Romanza africa is on which position now? For small dish not bud.

Avedonn:

Okay thanks. But which of the strong decoder is encoded with H265?

497s I think that should be their latest for now

god2baski:
Romanza africa is on which position now? For small dish not bud.

7 degrees E

Unluckrees:

7 degrees E

Thanks

Pls house which name of channels do we have on 32e I great u all

god2baski:

497s I think that should be their latest for now

Correct.. It's not just being the latest but the only model in strong family that has such capabilities in this side of the world

ateizaa:
Pls house which name of channels do we have on 32e I great u all

The attached image will give you a clue of some of the channels to expect

My 32 is off is it ganeral

mbuaba:
My 32 is off is it ganeral

Same here

HIGHESTPOPORI:
Same here

Mhen I Don adjust my dish tire. Please notify me when it comes back on