₦airaland Forum

bbally:
@adubam, are you in Lagos and please can I have your phone number?

In Abuja Sir.

nora2018:
Hello my enviable bosses and distinguished gurus in the house I was contracted to connect DSTV to all 13 rooms for a guest house so confused on how to write quotations of materials needed for the job to be submitted urgently to the chairman.... Please help me I need head way.

How do they want it done. Will each room have a decoder or just one decoder to be shared among the TVs in the hotel?

waleayeni1:
Thanks for all your help. I finally nailed the bird. You do not realise what your guidance does. You give us a sense of accomplishment after achieving what seemed like a feat only meant for a select few.

Congrats. What were you doing wrong?

Ojochogwusunny:
what are you refering to as pantaker sir...? I am a lover of cheap goods.

It's a place where they sell used items.

Digitizedman:
Bro I am not trying to contradict you in anyway. I noticed that once you go into setting in Csat pro 8+, and change the resolution to 1080p. It brings to life a more better picture quality.

You are right Bro. I tried it yesterday using 1080p. The picture quality was way better.

Spy360:
Willan old dish still be catching good signal? Just asking...

AS LONG AS THERE IS NO BEND

goaldynboy:
Thanks a lot.

But should I cut open the front of the lnb like the one in your picture?

Or it is not necessary?

Well done bro. If you have the money please buy another dish to enjoy better reception. You can even get 90cm for N500 if you know any pantaker market as we call it here in the North.

As for the LNBF even if you cut it open don't leave it without covering it with a nylon, because if water enters that is the end of the LNBF.

samhwande67:
Pls My Brother, Can You Compare It(CSat Pro 8 +) To QSat G23 In Terms Of Video Output?

QSat G23 has a better video output. But Csat Pro 8 + output is not bad per se.

waleayeni1:
I have been beaten two nights in a row tracking nigcomsat sattelite. Got dstv satellite on 36e brought it down like I was advised but no signal quality used 12519 H 29500 & 125198 H 29500 with no success. What am I still missing please?

Sorry bro. From my experience in tracking sometimes it is the FEC that could be the problem. We are too quick to use AUTO as FEC. They have FEC of 2/3, 4/5 etc. Secondly it is the polarization. If you are given a polarization of H, and you've tried without success, nothing stops you from using V. This has worked most times for me. And finally, your LNBF position.

Digitman:
Bro the suffer na part of the thrill of FTA. Especially if the guy finally catch the signal. That thrill will be amazing for him.

Nice one bro

Some suffering no worth it especially if you are using small dish. All those attachment will still be affected by heavy rain and wind.

Digitman:
Excellent... He can still make 42e primary and attach 28e as secondary to the LNB holder below. Then 51.1e TSTV on top of the 42e as the third LNB. Just a thought

Yes. But the signals will be badly reduced. For me Multi TV/ Badr for MBC is a must to be Primary. If you make Nigcomsat Primary anything you attached to the set up will have huge loss of signal quality.

SegaWarrior:
Hi gurus, I have Nigcomsat as primary and Multi TV as Secondary, can I still add 16°E to the set up?

Very Possible but you go suffer to get it. See my Picture above. Make Multi TV primary, Make Nigcomsat Secondary and while facing the dish by your right below the Multi TV; just search for 16e while moving the LNBF around the iron holder using this frequency 12333 H 30000

Acrofab:
good day bro. pls how good is strongest stg 900a decoder? I need a good decoder that will enable me watch many channels and won't be expensive

If it is HEVC 265 enabled
Multi stream
auto roll powervu, then go for it. If not, go for this good and favourable price decoder:

Csat Pro 8 + for N7,000.

benzberch:
Please is power vu still working ,if yes which receiver Auto rolling is the best.please

YES. Tiger Decoder, CSAT 8 pro

Cheny:
Based on the fact that astra 28e is set as primary,Nigcom is just few cm above. You get my point?

28e Joy TV primary and 42e Nigcomsat Secondary.

ManirBK:
hello Bro pls are you still watching Sony package with your 4950H.
I use to watch them with tiger t245+ultra but now to no avail that's why am asking if to go and purchase 4950h.sorry to bother you thanks

They've been scrambled of recent. It's just the CNN, BBC, CNBC, SKY NEWS and some view ones that PowerVU or autoroll decoders are opening for now.

Digitman:
The last time I checked, the above frequency is no longer active

Working in my room

nora2018:
Distinguished sat gurus in the house I need your help am trying to nail former Mytv positions @ 68.5e home to christian station with my tracker I can't seem to hit green using the following t.p 12722 V 26659 and 12562 H 30000 what am I doing wrongly? What is the lnb skew? Is there other TP I don't know about?

Use 12722 H 26657

nora2018:
this thread has thought me a lot go through it you will surely get detailed answers to your questions, may God bless everyone that has shared am grateful

Use this 10804 H 30000 to track then blind scan

dennisworld1:
90cm

Get 1.8m dish. Most free CNN are on cband

dennisworld1:
Which side is CNN position

What is the size of your dish? It will determine the frequency and Symbol rate I will give.

mahkanjuh:
Please, kindly help with the telegram link

Apologies to the mod:

Search for "Free to Air Satellite World" on your Telegram App.

lincolnola:
Chief,
Did you see the pix I attached?
I guess you didn't follow it from the beginning

If it is Bet9ja you are looking for it is not on 7e but SES 5

lincolnola:
It seems you didn't understand me.......
I snapped that dish position of a bet9ja shop.... which i guess is 7e
I have my own white 85cm Dstv dish installed in same direction at about 73 % and no bet9ja virtuals pop up after blind scanning

Is not about installing a dish with same direction of the one you see in a particular location for these reasons:

1. Satellite directions and positions sometimes varies with location
2. Bet9ja virtuals does not have a single satellite position.

What to do:
Get the right Symbol Rate, Frequency and Polarization.

Good Luck.

GeorgeD1:
Bro, are you sure about that?

I'm still part of the 'most people' but have not moved

I know a lot of names here that are in the Telegram Group. Compare the rate of activities before and now you would understand what I meant.

I am not here to give any link. Seun should try and either upgrade Nairaland or sell it to investors that will make it up to modern standard.

linsk:
hi, just tracked AFn on ses5E cband powervu, will d keys for afn on 9E work for it also??

Most people in this group have moved to Telegram answers are rarely given here.

waleayeni1:
I need your experience bro. There aren't many watchable channels on astra 28.2 e; majorly Ghanaian stations. Can you please help with a sattelite I can track that has cartons movies and documentaries with 90cm dish? I just wanna know. My option

If you can lay your hands on a bigger dish; you might be lucky to get those channels on either a C-Band or Ku-Band

lincolnola:
And in this case, to watch the same channel as the primary decoder ryt??

Yes. But the decoder you are looping out from must be on for the other to have signal

Willokafor:
How can i connect two decorder/receiver from one diseq output to the receivers :
I. E one receiver for solar the second one is for electricity

Not possible. But you can loop out from one decoder to another.

SlyCharlie:
You uploaded a picture and circled (H.265/HEVC) as meaning multistream, that isn't correct.
I was just pointing out that H.265 doesn't mean Multistream. A decoder can be H.264 and still multistream.
Strong 497s is H.265 but doesn't multistream without a software patch.

'H.265' is just a video compression standard, 'Multistream' on the other hand is a Signal Stream Transport standard.

Two totally different things.
It was simply education, not an argument though.
Peace

You are educated.

cabes007:
Am using usb kind of wifi

It seems the wifi stick is not automatically installing its software on the Decoder. Try D-Link the long one as it hasn't failed me.

I