₦airaland Forum

Clone2020:
Not offering this service right now, but check back later, I'm planing to restart it next year.

Clone is back 😁😁

Invest1:
Good evening everyone. I am new to this section and just got a 1.5kva 12 volt inverter (Kartel).

Plan to get battery soon.

Pls I need a budget friendly battery.

Advise will be well appreciated.

How much did you purchase this bro?

Interested, can I get your contact?

Not resolved yet. Planning to get an MPPT CC

inoki247:
Hi so were you able to solve this issue...


I have someone with similar case...

Please tell me solution if it's been solved.

60 AMP PWM CC

matify83:
Interesting!

A PMW because of it's low efficiency will invariably reduce every voltage to about 12V averagely.

So, 12 X 48A = 576W.

The only thing saving this charge controller going up in flames is that it can never attain its maximum power generation.

576W is too much power to connect on the 12v system.

The rating for a 60w PWM at 12V should be around 360W or less.

You are tempting fate.

Foreign Used panel boss.
Did not purchase it ,the installer did and he opted for foreign used panel because he wanted actual capacity and he said he tested it.

saxwizard:
Is the panel new or used?

Did you do individual test on the panels

Oshomo12:
Your connection was done wrong.

The correct one is your second option
17.8A and 37.6V

Ok Boss, it’s not parallel ? So I need to correct it to parallel right? Thanks boss.

Hi everyone,

I have 2 335 watt panels with :
1. Maximum power voltage ( 37.6 V ).
2. Maximum power current ( 8.91 A ).

* If the 2 panels are connected in series,
Output = 8.91 A and 75.2 Volts

* If the 2 panels are connected in parallel,
Output = 17.82 A and 37.6 Volts

Just to confirm if the above calculation is correct?

My 60 amps PWM is delivering a maximum of 8.7 A at peak and voltage as high as 65 volts during float with the panels in parallel connection.

This is a 12V setup ( 220 amps tubular battery and battery hardly gets full in a day without usage during the day.

Just to confirm if my connection was done right.

Trippledots:
Ok, My recommendation is still the same. Or do you want to go and buy another battery?

Looking at getting the battery replaced.

Dam5reey:
You installed your self right?
Just Get an MPPT controller to solve this issue.

No bro, installer is out of town.

Thanks boss. Had to edit my post for more clarity.

The issue I am having is that the battery drop from 5 bars ( Full charge ) to 3 bars after 2 minutes or less on any load no matter how small, then remains on on 3 bar for like 3 hours before I power down the setup.

Trippledots:
When using a PWM controller, for a 12v system, ideally your panels should not go beyond 200w per module except the distance from PV to your controller is very far.

If you want more power, then you parallel more panels of same range and make proper cable provisions for minimal voltage drop before power gets to the battery.

Recommendation:

1. Buy an MPPT controller
2. Change your panels to 200w units and parallel them, then sell of the 335w modules
3. Buy more 335w modules and parallel with existing units.

Note that apart from the total load on your system, in this case 150w, how long you run this load(s) on the battery and time of day also matters aka load profile.

Hi House.
My charge controller drops from 5 bar ( 13.6 volts ) to 3bar ( 12.4 volts ) after full charge on a load of 150 watts within 2 minutes.

What could be the issue ? Setup was done a week ago.

Note had to charge with external intelligent 20amps charger to full bar.

This is my set up :
1. 2 x 335 watt GCL panel in series
2. 60 amp PWM Charge controller
3. 220amps Caesar tubular Battery
4. 1KVA MSW Inverter

The main issue is the battery dropping from 5 bar to 3 bar on the charge controller with 2 minutes once load is applied on the the battery.

rmoloruntoba:
I Just got my "POWMR" CC yesterday.
I have a 100ah battery connected to 24v pv and a pmw CC.
With a Ups connected connected to the load port of pmw.

But the new POWMR 60a said I should not connect inverter to the cc, that it can damage the Cc. Is it right?

Hi bro, what’s the cost of the CC?

Location?

LeoDeKing:
Tien Jack Rich?

I thought you must be a Nigerian to be eligible to contest.

Jack-Rich was born on the 28th day of January 1975, to a humble family of Elder and Mrs. Teinbo Saturday Seliyefubara Jack-Rich, in Rivers State, Nigeria.
At the age of just ten, the responsibility to become a man was naturally bestowed on young Jack-Rich who at the time had lost both parents, and without any guardian except God Almighty to chart his path.
After twelve years of hard work, Jack-Rich founded J+G Global Gas & Oilfield Limited in 1998 and other subsidiaries to provide oil and gas-related services. Today he is the President/Founder of Belemaoil Producing Limited, the first indigenous oil Exploration and Production Company in Nigeria to emerge from an oil Producing Community in the heart of Niger Delta.

Nice job boss.
Just wondering no drainage for waste water?

spyder880:
We are extending the concrete cast of the floor outside, providing spaces for flower trees to be planted as soon as rainy season starts..............

Beautiful home. Congratulations.
Please how can I contact you sir?

DownChelsea:
Too bad for you, Maybe WhiteMoney has done juju for us that's why we love him so much..


But guess what.. WE LOVE THE JUJU.

IT IS SWEETING US
WE WANT HIM TO DO MORE JUJU FOR US
WE ARE GLAD TO BE CHARMED BY HIM


MAZI ODOGWU EGO OCHA BILI BILI WHITEMONEY 1 FOR THE 90M

Cc @dominique
The spamming on this thread is getting too much.

CSTRR:
As pere dey eat that food, the thing dey vex am as dem dey hail white money.

He was hoping that the ladies would step up and cook, but they all disappointed him.

They can't cook, so he has no choice but to grudgingly stick with WM.

Wrong. Queen did.

Hillclint:
1.7 cash down sir

1$=#525

3strikes:
I hate My self iX

Air head. Pretend this thread does not exist too.

3strikes:
dey deceive yourself

Go kill your self bro. Stop the trolling.
I too know killed your project, them suppose hang you and that fellow way design roof like this.

Amazing

princesavo:
Also
With the pictures
If you claim it is a clone phone
How come the accessories are intact and Brandnew, and the phone inside the box is cloned. Does a clone phone come with Brandnew accessories and a bad phone

Oga your talking in the rubbish.

chelseamann:
have you swapped the phone and trying to shift responsibility to someone else? Show us the IMEI of the phone inside the phone let's match it with the one Wolfenstein sold to you.

Men. I hope you retract this. If eventually no be Sirlop fault.

Obviously a clone. Check out the FC font.

wolfenstein:
He said phone is in recovery mode, he should try put on normal mode by using volume key to select it. I'm not trying to argue here, if imei corresponds with the box then fine I'll see what I can do

The mixup might not be from both party. It could be from seller you bought it from. He played you boss.

Sirlop I urge you to put on the phone to see if IMEI matches.

Bidapex:
This imprint is clearly not of an original iPhone.

Simple. Resealed.
Cloned

yalhaji:
picked

amicdan:
Brand New Open Box
Google pixel 4a
6Gb/128Gb

Price: 185k
Location: kaduna , can waybill to any state in Nigeria.
WhatsApp: 08065481839

Escrow welcomed

Still Available

amicdan:
Brand New Open Box
Google pixel 4a
6Gb/128Gb

Price: 185k Negotiable
Location: kaduna , can waybill to any state in Nigeria.
WhatsApp: 08065481839

Escrow welcomed

Still Available
Escrow welcomed
Wese90 recommended

amicdan:
Brand New Open Box
Google pixel 4a
6Gb/128Gb

Price: 185k
Location: kaduna , can waybill to any state in Nigeria.
WhatsApp: 08065481839

Escrow welcomed

Still Available
Escrow welcomed