₦airaland Forum

makavele:
More pics coming, stay tuned

Meanwhile, I had added more panels on the roof;but don't have a picture this time of them.

Interesting.. please how many more panels did you add.

Missed this? When are you restocking pls?

If it is toks... no p. But if it is naija used. . Then be sure that the previous owner maintained it well with a good oil grade.
Check if any Kazeem has tampered with the electronics and wires.

All the best.

Vacancies! !!
Cashier and supervisor
Job Description
1. Give information about betting odds to customers
2. Take payments for bets
3. Pay out winnings to customers
4. Balance takings after the shop closes for the day
5. Use the computerized betting and till systems
6. Check that digital display boards show the correct betting odds and results
7. Keep the shop stocked with betting slips, pens and up-to-date odds sheets
8. Explain different ways of betting to customers
9. Give information about other products
10. Report any suspicious betting patterns or under-age gambling to the shop manager

Location:
Agege : Orile Agege

Required Skills, Interests and Qualities
1. Excellent customer service skills
2. Good maths skills with ability to do calculations quickly
3. Honesty in handling cash
4. An interest in sport
5. The ability to work with computerized equipment
6. Confidence in working under pressure
7. A willingness to work flexibly.
8. MS Word & MS Excel Proficiency (Very Important!!!)

Entry Educational Qualification
Cashiers : SSCE.
Supervisors: A minimum of OND in any discipline.

Interested candidates should forward their CVs and application letter to: cvs. Charlesnote@gmail.com

Subject of mail must be 'Agege Cashier'. This is very important for your application to be considered.
Salary: 15- 20k.

Job Description
1. Give information about betting odds to customers
2. Take payments for bets
3. Pay out winnings to customers
4. Balance takings after the shop closes for the day
5. Use the computerized betting and till systems
6. Check that digital display boards show the correct betting odds and results
7. Keep the shop stocked with betting slips, pens and up-to-date odds sheets
8. Explain different ways of betting to customers
9. Give information about other products
10. Report any suspicious betting patterns or under-age gambling to the shop manager

Location:
Agege : Orile Agege

Required Skills, Interests and Qualities
1. Excellent customer service skills
2. Good maths skills with ability to do calculations quickly
3. Honesty in handling cash
4. An interest in sport
5. The ability to work with computerized equipment
6. Confidence in working under pressure
7. A willingness to work flexibly.
8. MS Word & MS Excel Proficiency (Very Important!!!)

Entry Educational Qualification
Cashiers : SSCE.
Supervisors: A minimum of OND in any discipline.

Interested candidates should forward their CVs and application letter to: cvs. Charlesnote@gmail.com

Subject of mail must be 'Agege Cashier'. This is very important for your application to be considered.
Salary: 15- 20k.

JohnKester:
Please kindly share your source for the water distiller, that is where one can buy it.

Cheers

Here is a sample
Stainless Steel Water Distiller Machine

Chuckdee:
Please who has contact of where to get Distilled water in Abuja?

Dee check filling stations mobil and total...
If you can't find. . You are better off buying a distiller your self. 50-60k .

Please do you know any good Mercedes tech inn lagos. ?

Please where can I find a realiable Benz technician in lagos. ?

I will go for Trojan-Re any day.. it's a personal choice based on how robots their RND has evolved over the years..



Mean while :
Please which 250w solar panel brand name would you recommend..?. Base on efficency during low sun light
there seems to be alot out there.

Printer Still available ?

MarvinZulu:
I have a design for a new canned drink. It has already been designed, are u saying my design can't be used to print on the can?

Can you print on cans your self. ?
So you see.. you need the major players to do that.
it would be difficult to have mass produced fake cans.. unless you have you own franchise and product..
I hope you under stand.

There is no such thing as a fake malt. There are only two companies with the capacity to design art work for cans. NAMPAK AND GZI. What we have here is a change in art work ..
It also not easy to produce fake malt. So when you taste a fake malt you can not swallow it.
It is not a technology you can produce in your back yard.

What i see here is just a mix of old and new can designs. Well in due time you would understand better.
From my 10 years experience in fmcg.

iLoveTheSun:
@blazeup: may I ask what is 'CC'? Do you have a drawing of your setup? Can you share with us?

'CC' is charge controller. cant draw it now and i have not seen any drawing on the net yet.

gentlemen, it is right to connect my inverter DC inlet to the Load connection point of my MPPT charge controller ?
a colleague in the Office (a certified EE) has insisted that is the correct method of connecting both the inverter, solar and Disco power as it would enable the charge controller serve as a switch and as well regulate the current at which i charge my batteries.

that this : Solar PV to the solar PV input on the CC as usual, Batteries would be connected to the Battery input on the CC as usual, inverter DC cables would be connected to the Loads outlet of the CC .while the AC inlet of the inverter for charging would be connected and powered on.
His point been that the CC would switch between DC sources for charging the batteries as well regulate the SOC of the batteries to my preferred cut off point.
(solar to cc, battery to cc, inverter dc to cc loads, inverter AC input to AC mains for charging, inverter AC outlet to my desired inverter powered devices) vs ( solar pv to cc, battery to cc, Inverter DC to batteries, and the inverter AC IO would be same). Can the CC load point also serve as a DC input to the CC to charge the batteries as well ? the Charge controller here is an EPsolar 40 A.

please comment.

Charpell:
First lets calculate the total wattage of your appliance. I am going to remove the Ac from the equation for proper audit

65 inch led tv, 67 watts * 1 = 67 watts
42 inch led tv, 45 watts * 1 = 45 watts
32 inch LCD tv. 11 watts * 1= 11 watts
Deep freezer, 500 watts * 1= 500 watts
1 normal standing frigde/freezer. 300 watts * 1 = 300 watts
Electric bulbs 20 watts * 10 = 200 watts.
Fan 50 watts * 3= 150 watts

Total = 1273 watts

Recommended Inverter 2kva @ 24V
Controller choice = 40A @ 24V
Battery capacity = 240AH
2 batteries of 200AH will be required => 200AH
Battery Energy = 200AH @ 24V = 4,800Wh;
For a panel of 200W X 7hours of sunshine = 1400WH
No of panels required = 4800/1400 = 4 panels


Solar System Requirement
2.0KVA @ 24V Inverter
30A @ 24V MPPT Controller
200Ah @ 12V Battery
200Watts Mono Solar Panels
PV cables (4*4mm²) 20 meters
Power cables (1*10mm²) 20 meters
Circuit disconnect
Panel bracket (Rooftop/ground mounting type) 1 Set

To get a free quote, send me an email or follow this thread https://www.nairaland.com/3141574/building-house-want-incorporate-solar

please can you name the brand of TV quoted here, or were you assuming that the TVs would be in Low energy conservation,
my 43 Samsung (plasma) pulls 150 watts (watts meter reading) in eco mode, I am currently looking for a brand that would be able to conserve as such. The best of same sized LEDs i got were rated 80 watts, these pretty much higher than what you quoted. .

coderXO:
Called the guy but he does not have it. I've googled but can't find it. Where else can we get this dc fan?
What's the brand of yours cj?

Get a rechargeable fan, most of them have Dc inputs. Then get a suitable adaptor if you need it..you are good to go.

Valto:
not planning to go off grid with just 400watts panel and 2 batteries. but i decided to go for a very good inverter once and for all so there wouldn't be any need to change it after few years. all i need is to add more panels and batteries later.

This is quite nice. I wish there was a silver bullet to having to buy batteries every two years. This is the way to go.

Him self Na human being oo o ..singing in tubaba's voice

Have a clean avensis. 2006 manual for 750k. Exterra jeep 650k both are clean and are still in every day use to work.. ( both are owned by my colleagues).

AQ one month registered ?

MPVGoddess:
Edo State is Nigeria's capital of Audi. Am sure you can find or import Audi specialists from there if they aren't close to you.

But as good as Toyota products are, if you aren't in such funds as to replace them if stolen, I wouldn't recommend them

so, if i am in abuja or lagos and my Audi breaks down i should call my Edo base mech to jump on the next flight to fix it right ?, or just manage the Lag/abuja based Kassem who would you would be 80% sure that he is gonna be guess working..

Audi is the right choice on a very good day, but when you evaluate this using the criteria he listed , the Camry would pass with flying colors.
i own a camry for the same reasons he listed, but i love the audi more for the car that it is, i am happy it is his choice..

what about a clean like toks 2007 with zero issues. 92000km, for 1.5

It all depends on your plans .. how much you are willing to spend on cars and how long you want to use them.
If want a car that can cope with Nigerian factors( parts, technical skills, roads) for +/- 2 years =Audi. Then +/- 5 years = Camry.

The Audi is a better made car when compared to camry as they have better handling, more power they are built to last under ideal circumstances they also offer better driving experiences than Camry. How ever some factors unique to this part of the world ( availability of parts, Technical skills of the average technician rewires) plus our maintenance culture can turn this technological masterpiece to a moving Nightmare in less than 5 years. I currently own a camry 2007 which is a superb powerful salon car that can give any germany car a real showdown when well maintained and the fact that it would never give up makes it ideal for me for now... you see it depends on your plans.. If you are willing to spend on original car parts regardless the cost any car would be ideal....