₦airaland Forum

The Bonga Fpso(Floating Production Storage and offloading) was designed using Computer aided Software which include PDMS,microstation,Autocad, and Pro/E



Shell, like other petroleum companies, spends millions of dollars creating 3D CAD files throughout the
design phase of a project to visualize the designs of equipment, instrumentation, fixed and floating
platforms and many other components necessary to extract and produce petroleum.
The Bonga visualization was constructed by taking the submitted CAD files from the contractors responsible
for the project. Each contractor had its own preferred in-house CAD package, ranging from PDMS,
MicroStation, AutoCAD to Pro/E. The file sizes were considerable, some reaching 2.5 gigabytes. All files
were then imported into MicroStation and converted to the Walkinside format. Walkinside outputted a
virtual reality file, which enabled the Bonga project team to freely walk through a virtual version of the
Bonga FPSO (in a manner similar to a PlayStation 2 or XBox game). Using this virtual environment, the
team could check for collisions and other design anomalies that could have significantly delayed the project.
The resulting 3D visualization was one of the largest ever made in the world, covering more than 100
square kilometers (39 square miles) and containing more than 100 million polygons.

To learn how to perform similar feats, click here. OIL AND GAS TRAINING

this is reminding all that there are still spaces available for the training starting this saturday 5th of july 2008.
pls reserve a space for yourself.

This training will only accomodate a limited number of participants(6) if you are willing to take this training reserve a space by sending a mail to buyconcepts@gmail.com titled reservation.
you will then recieve further instructions on how to reserve a space for yourself.

Are you an engineer and you've always wanted a career in the oil and gas industry? Then, this is for you.
As an engineer, your degree alone cannot take you very far, more often than not, you need on the job experience, that's why many oil and gas companies looking for engineers always ask for ridiculous number of yrs of experience, one sector of the industry you can learn without really being there is COMPUTER AIDED ENGINEERING DESIGN, this involves the use of tools such as pdms(plant design management system), hysys and ceasarII to design process flows, plants, piping and long distance pipelines, and subsequently analyse them for stress deficiencies.


Buyconcepts and zories solutions have packaged a training programme titled
PIPE DESIGN AND STRESS ANALYSIS USING COMPUTER AIDED TOOLS.
Duration; 4 weeks, sat and sun
Price; 50,000 only
Venue; subsystems technologies, 42 falolu st, off akerele surulere lagos.
Date; 5th of july 2008
Time;10-2 sat, 12-4 sundays.
Call 08067535040 for further details.

Please Note, you get software, Codes and standards, training manuals and pipe design ebooks over 20 in number

Still looking!!!

WRONG!!!!, I had the opportunity of visiting the nigerite factory in 2005,the material asbestos in itself is harmful but has since been faced out and replaced by other components including paper, cement etc. The name however has stuck. No one includes asbestos in making roofing sheets anymore.

Pls note; there are limited spaces available, hurry up and indicate interest by paying either in part or in full into our zories solutions acct number indicated at www. B u y c o n c e p t s.biz. (Without spaces)

Yes, we are affiliated to ipebs, institute of piping engineering and building services, also, we are currently running a referral campaign where you get 7% of the amt your referal pays.

all Participants will be provided with laptops for use during the training.

Take training in oil and gas related courses @ buyconcepts training, see details and Register online HERE

Course to start on the 9th of August 2008;(Class open till sat 16th august)
Pipe design and stress analysis using computer aided tools

Venue, Subsystems technologies, #42 Falolu Street off Akerele, Surulere,
Participants will be provided with Laptops
MODULE 1

· Re-introduction to the basics of fluid flow in circular conduits, pipes, fittings and components.

· Introduction to 3-Dimensional Computer Aided Design using PDMS.

· Pipe design and production of piping GA(s) using PDMS.

· Equipment Design with PDMS.

· Production of pipe isometrics and generation of Material Take-off reports.

· Drawing out-put with PDMS and exporting to AUTOCAD.

MODULE 2

· What is Pipe stress and analysis?

· Purpose of stress analysis?

· How piping and components fail when "over-stressed".

· Stress analysis using CAESAR II with respect to process plant requirement (ASME B31.3)

· Analysis based on piping flexibility, support and restraint location and design, stress containment etc.

· Interpretation of Stress Analysis results – Load Cases in the Operating Condition, Sustained Condition and Occasional Condition.

· Introduction to Piping Dynamic Stress analysis with respect to water hammer, relief valve firing, fluid pulsations, acoustics and seismic effects.

.

we are still unable to reach some of those that paid> if you did, and havent been contacted, Please send me a mail @ buyconcepts@gmail.com

Anyone with info that might help?

Medium sized office space needed in surulere. Pls send details to buyconcepts@gmail.com

Small office space needed in decent part of surulere.pls contact me on buyconcepts@gmail.com

Seminar POSTPONED.

Hi all, due to low registration, the Port Harcourt Seminar has been Postponed,

New Date is July 28th to 1st of August.

if you paid and have not been contacted. Please Send a mail Titled (trellix i paid) to buyconcepts@gmail.com

please note that registration with N5000 will close on the 20th of june and only registered participants will be admitted.

please pay into our oceanic bank account

Acct No: 1711201005005

Account Name; ZORIES SOLUTIONS,

Spaces are still available, hurry up and register by visiting www.b u y c o n c e p t s.biz

Take training in oil and gas related courses.(Free and paid) see details @ www. B u y c o n c e p t s . Biz for more details.

bump

Process piping design and stress analysis using computer aided tools. These tools include PDMS,HYSYS, and ceasarII, also get relevant codes(asmeB31.3,16.5 etc). See details @ www.b u y c o n c e p t s.biz (without the spaces)

Bump

buy-Concepts is a company dedicated to training Nigerians in oil and gas reated courses,
currently we are offering a Professional course in Process Piping design and stress analysis using computer aided tools.

see our website HERE




If you know someone that might be interested, please refer them by clicking HEREand earn 5% of whatever the person Pays.

thanks

I'm looking to rent or purchase a medium size cyber cafe or a compter school.in either the mainland or ikeja.
If you have any info please mail b o r I s w o l e @ y a hoo.com. (Without the spaces)
Thanks.

bump

I'm looking to rent or purchase a medium size cyber cafe or a compter school.in either the mainland or ikeja.
If you have any info please mail b o r I s w o l e @ y a hoo.com. (Without the spaces)
Thanks.

Bump

You'll get a 5% discount for every one you bring.

Please Note that the Maximum class size will be[b] Six[/b], admission will be on a first come first serve Basis, so hurry up and register by paying into our bank account.
mail b u y c o n c e p t s @ gmail.com (without any spaces) for further inquiries

Yes Certificates will be awarded at the end of the programme.

Training Venue;Smart Drive and Systems, No. 672, Ikwerre Road, By Rumuokoro Roundabout, Port Harcourt.

Training Holds 23rd to 27th of June.