₦airaland Forum

Pls does anyone have idea about legacy money market fund by FCMB?

yekini007:
Please 🙏 how to invest dollars on Stanbic Ibtc Mutual funds ....?


Am currently on Naira Stanbic Ibtc Mutual funds

What's the interest for the naira mutual funds you are doing?

kingreign:
Location matters. Where's the carlocatuon and which of the motor failed?

Located at Benin city.

Both the driver and front passenger seats motors failed

Pls where can I get the motor under both the driver and passenger seat for my es 350.

The switch are no longer working.

I think the motor is faulty already

kingreign:
Evap system malfunction due to over filling of fuel tank till it spills out. It's damaged the evap system. Scan the car, post the codes lets take it up from there.

I usually don't over fill my tank.

What happened was that water entered my car.
And I noticed it as I wanted to fuel the car

Hello all.

Pls what could be causing my fuel tank to be vomiting fuel while filling the tank.

It then makes the fuel attendant to slowly fill up the tank for the fuel not to spill out while filling

Pls is this gear oil good for es350

Squad4:
It's not the ECU, if you changed the coil and the plug and the misfire persists on the same cylinder, before got touching your ECU, check the injector for the cylinder, if injector is fine, do compression test on the cylinder. If it doesn't have compression, the the cylinder walls, rings or valves have an issue.

Thank you for your input.

We tested with another ECU problem persisted.

The injector was serviced also.

Pls how is the compression test on the cylinder done?

Abbeyismo:
Yes it possible the ecu is bad tho. Put another ecu and test.

Alright thank you

2cribz:
What u have is a carton
Not a car

You don't just have sense.

You better get sense in this 2025

Hello all.

My Es 350 check VSC light has been on for some time now.

Then when I am driving on high speed the yellow check light begins to blink and the car begins to idle roughly while driving.

The electrician diagnosed and the problem was coming from cylinder 4.

He interchanged the coil on cylinder 4 with that of another cylinder, fixed a new plug and serviced the nozzle but issue persisted when we test drive on high speed(same cylinder 4).

Then he say the next step is to check the brain box that likely the IC of cylinder 4 in the brainbox is bad.

So we will be testing out with another brainbox tomorrow.

Pls any suggestion regarding this.

Will the issue be most likely from the brainbox ?

oluwaseunla:
Is there any error code when you scan? If no, you may need a zero point calibration on the vehicle.

Pls how is this done?

2cribz:
Alaye troway that scrap es350. Sell am.its aleays having one fault to the other everytime.i bet u can drive that car for good 1week without issue

Lol.

Pls I am still up for better suggestions

Hello fam.

Pls my 2007 es350 check VSC light has been on for some time now.

I have tried clearing it severally but it keeps coming on after driving for sometime.

The technician says it's because there is no catalytic converter in the vehicle.

But I feel it's not the catalyst that's the problem.

Pls any Idea on what else to do about it ?

Can anyone assist me on how one can make payment to ecfmg Oasis account

Any trusted apps that can give an online card?

Abbeyismo:
The engine has a oil level sensor at the bottom right side of the engine it either bad or the sensor is not socketed.
6liters of oil is enough tho.
Check the oil level sensore

Thank you very much.

It was the sensor that was out of socket.

kingreign:
What's the level of oil on your dipstick?

I can't seem to make it out.

Maybe because it's fresh oil, but there is oil there

Hello family.

I changed the bottom plate of my es350 and also did an oil change

After that I noticed it's showing low engine oil level after putting 6 liters of oil.

Pls what could be the issue?

Is oil not enough?

Itsrm:
Where are you seeing 1173?

I was already wondering too

Itsrm:
The last increase to 24.75 did not. No one knows for sure what CBN will do. We have to wait till we see the result of today's auction.

Does it mean people invest without knowing the rate for for a particular auction?

Pardon me I am new here

Hello all.

Pls I have a question.

I am trying to register a fresh passport for my wife but there is a little challenge.

Her birth certificate carries place of birth as Warri, while on trying to verify her NIN on immigration website, NIN shows place of birth as Ughelli South.

As I saw it I didn't continue again.

Pls is there a way the place of birth can be corrected on NIN to tally with what's on her birth certificate?

Pls does any one knows why this is happening?

I am trying to register for fresh passport application.

When I try to verify the NIN it shows me this.

Pls any idea on this

Elui2:
Happy Sunday.

Yesterday night, I noticed that when I turned my 1hp AC with my 4.15kva thermocool generator, when the compressor of the picks up to start cooling, it's like the generator looses power to carry the compressor and the AC compressor trips off, and restarts the cooling cycle again,its happened again ,i had to turn off the AC. But when like came the AC worked fine.

Prior to yesterday, there was a time I turned on the gen, it was running but not producing power, so i called a gen repairer, he checked and said the Avr was still good.

He fired the gen and it came on.

Then he said the Armature of the gen was already getting weak.

Could that be the reason why it's not carrying by AC again?

Pls help o

Happy Sunday.

Yesterday night, I noticed that when I turned my 1hp AC with my 4.15kva thermocool generator, when the compressor of the picks up to start cooling, it's like the generator looses power to carry the compressor and the AC compressor trips off, and restarts the cooling cycle again,its happened again ,i had to turn off the AC. But when like came the AC worked fine.

Prior to yesterday, there was a time I turned on the gen, it was running but not producing power, so i called a gen repairer, he checked and said the Avr was still good.

He fired the gen and it came on.

Then he said the Armature of the gen was already getting weak.

Could that be the reason why it's not carrying by AC again?

AutoJando:
This Hardex, I don't want to call out a whole company wrongly. I had a customer who did oil change with this brand on his 2 cars: Acura MDX 2008 and Toyota Camry 2009. It will be unebelievable if I tell you that the Camry's engine got knocked, on the same day, the Acura's oil light too was blinking. Luckily I was on call with his wife(she drives the Acura) when this incident occured. I instructed her to quickly shut off the car and seek a mechanic that I can guide remotely. The oil and the filter were changed and that was all. For the camry, I ended up having to rebuild the engine for almost 300k, plus the gear was slipping too, had to fix that. 450k later, the car was back on the road. Toks engine and gearbox was like 1.1m then

So back to the topic, I advice you go back to what we knew. Mobil is fine IF you buy from a Mobil filling station. But the right grade!



#AutoJando

How much is the Mobil oil?

Hello fam.

Pls apart from hardex gold engine oil for Lexus es350 which other brand is also very good but not too expensive.

The price of hardex gold is much now.

Sputnik12345:
Same thing happened to me.
I captured in Ibadan 3 weeks ago...I think it's ready.
When and where did you capture?

I captured at Asaba processing centre of the 18th of January

Pls anyone with an idea why this 4 steps are this way.

Before now the three above were completed already while the last one was pending only for me to check now and saw the three above the same way.

Hello guys.

Anyone that has collected from Asaba processing centre recently?

I captured on the 18th of January but they are yet to update the tracking Portal yet.

Any possibility it will be ready now?

Yes, so guys I applied and paid for the passport on the 9th of this month.

I captured today at Asaba processing office. I was supposed to capture yesterday but their new head of operations just resumed and was not on seat due to meetings to give approval. So I was told to come today.

Officers were all friendly

Documents that were asked for were

The appointment slip
Application slip that has been vetted already
Payment receipt
Original birth certificate (later returned to me)
Original LG identification certificate ( returned also)

They gave me a passport collection slip and said a message will be sent to me to come for pick up of the passport.

This was all purely DIY.

Who has been able to go for capturing after this automation of passport application?