₦airaland Forum

lekbel09:
The average Nigerian is dubious and slimy, if there is one thing I hate most in life it's for someone to cheat me, that person will never get away with it

oshey!

omograndma:
.

Essont:
Boss do you have a 205 65 16 good ones not those Chinese brands oo.

Please kindly let me know.

haykay2005:
Will it still take time to for the ecu to learn after cleaning this? The rough idea has reduced at low speed but still there. I have cleaned the idle control valve as suggested. Extremely smooth in Park and neutral, to the extent that I will think my engine is not running

JapD:
Hello All,

Can anyone please recommend a very good Mazda mechanic in Lagos? My Mazda CX-7 2008 model is having some mechanical issues.

Thank you.

kenmaro:
Contact Gazzuzz

Charley2020:
This thread is a waste of time. I can't believe I spent the last 3 hours reading every page only to find out that the project isn't even halfway complete. What a waste.

radautoworks:
Can't sell grid chargers... But that won't solve problem . Plus 7.7

ranz321:
Good day, I have a pencil light camry, I have this issue. When I am driving, the car jerks, my mechanic has changed fuel pump, plugs until they changed the coils it now stop jerking.
1. Now the car sometimes goes off when I stop in the traffic light and takes a lot of starting before it comes back on.
2. the jerking happens when I start moving sometimes (maybe when the engine is hot) then sometimes when I am on the express.
3. Also when I just start moving I have to remove my leg from the acceleration slowly before it change gear.

Please what can I do, I have spent a lot.

Domain82:
Please i have p0171 code on my Hyundai Tucson 2007 v6 4wd ...pls what do i need to fix.thanks

haykay2005:
@gazzuz and all. My car vibrate towards the engine bay at low rpm especially when am applying break,Most of the time when I put on the Ac. The vibration goes away at high speed. I just serviced the car and no code whatsoever. New plugs, throttle body cleaned, new fuel filter, no fuel pump problem, engine mounts in good shape. What could be the problem pls?
1999 toyota camry

GAZZUZ, you Said in one of your old posts and I quote

[b]This is most likely what is happening with the idle on your Camry: Over time their is a build up of deposits in the throttle body that will slowly restrict air flow. If nothing was done the engine idle would slowly become lower and lower. The computer will adjust for the lower idle using its idle control system. Over time the computer will "learn" a new "base idle". When the battery goes dead or is disconnected the new "base idle" is lost from the computer memory. Once the "new" base idle is lost the engine will not idle properly until the computer can relearn the new base idle. This should happen much sooner than 100 drive cycles. One way to speed this process up is to clean the deposits from the throttle body using a spray type parts cleaner and a rag. With the throttle body clean the base idle should be much closer to the computers original base idle and the engine should idle almost normally until the computer can relearn its "new" base idle"[/b]

Could the newly cleaned throttle body the problem here? May be I should just remove and insert the battery for the ecu to learn the new base idle. Cos this suddenly started after a thorough tune up that involves throttle body cleaning

flgd:
Who has any reliable person who sells clean cars... need a camry

henrygale:
Hello chief...thanks for your responses.
My mechanic eventually changed the actuator, but the check engine light came up after he finished the job.
Car started, the rattle stopped but the check engine.
And I noticed the car laggs a lil while going uphill or about to pick up from a resting position.
I scanned the car today and got a P0016 error code.
What do u think pls?

penger:
Here...

Crvrider:
Please for those who know. Why would any mechanic do this? The pix is my idle control valve. Though it has been changed but ever since the change I have been having high idle speed.

Cc Gazzuzz
Cc Luvvinhubby
Cc Thebigkendo

Thanks in anticipation.

obekediamondfuto:
Oooh OK another constraint....
Camry suppose Don land by now na

kingreign:
Over clean and over sharp go dey worry that Camry boss.

nnamdibig:
215/60/16.....price for 4 pieces pls

Controlv:
4 units of 215/60/R16 needed

radautoworks:
Been watching for a while. You want some help? We fix these.

7.7v hybrid battery chargers.

AutoMoTech:
How come?

obekediamondfuto:
Nice suggestion but I think the Camry deal is already underway.... And the exhaust thing will create unnecessary stress....

One stone will be used to kill 2500 birds...

Get a Camry, while doing the necessary and possible leg works and general servicing, take down the engine and possibly gear, when on the ground change all changeables then install other engine.....

If both engines are even perfect, we may not have any need to return original Camry engine

Emperoh:
Nnam, you should follow Rich Rebuilds on YouTube. He does Tesla and electric cars.

obekediamondfuto:
nice suggestion....... but like oga implied, too much noise... but if noise is a problem....

next time Veracruz is cruzing to ladipo, u take vehicle along and give them to run for like 20mins....

whatcha say?