₦airaland Forum

1.5m?

mejai:
The python is now resting with its swallowed prey

U don see am, u don rest.

Agwo na ihe oloro adorona!

destinychildolu:
Ikechukwu How far? We will challenge it in court Abi? They are not putting on shoes while votting. It is a ground for cancellation

Do you realize that some of us Igbos support APC?

godric:
I bought my first car, Mazda 323 Nigerian used. I wanted to buy golf3 but the owner changed his mind and the mechanic told me that there's a Mazda that's ok and persuaded me to buy it. After a week, the car wahala poped up, ranging from high fuel consumption to suspension, fuel pump issue. Changed the fuel pump several times, rewire work every now and then. I changed my mechanic and rewire to the one introduced to me by my younger brother but still the same.
There was a day after leaving a rewire workshop with my brother, the car just stopped. We called the rewire, he fixed it and gave us assurance that it was ok. I just gave the key to my brother to drive it straight to his house to use it for few days because I don't trust anything about the car. I mounted a bike, off to my house.
My brother cruised it around for 2 days when the wahala start again. I told my brother to put it up for sale but he said NO, that he will make sure the car is fixed to perfection.
He eventually got tired too and put it up for sale. No buyer for more than 3 months. I called a rewire to do some magic and boom! It was on road. I drove it to a funiture workshop to check some funitures. Through our discussions, the man got to know that I want to sell the car, he was interested but no cash. We striked a deal of 2 sets of seven-seater sofa with stools. He jumped at the offer, I didn't waste time, I looked for a truck immediately and packed the sofas but the stools are yet to ready but he promised to bring it to my house the following week. I jejely dropped the car and the key for him immediately ('agbana' must not follow me home again).
A week later, on my way to work, I saw the car at a mechanic workshop, I waka paas. The car was there for more than 3 months. I learnt he later sold it as scrap.
As for the stools he promised to bring the following week, he never bring am and I no fit ask.

kikikiki kikikiki

Beautiful! I love this

xjiggy:
PHED is essential services. The lockdown is not suppose to affect essential services. Wike has gone mad. I don't understand why he's seizing food trucks and arresting Electricity providers. If nobody is above the law, Wike should stay home too and allow the law enforcement arm to do their jobs.

incase you don't know bro, A Governor is the Chief Security Officer of the state & he is therefore, number one enforcement officer

beautiful

Ya fiotuba!!

lobatan!

Let's pray it's true

Senator Abaribe hit them below the belt



Uncommon Budget designed to fail !

[quote author=GAZZUZZ post=82501536][/quote]Morning Sir,

I just bought an RX 300, 1999 model. It responds & moves very well once I start it.

But I noticed that after driving for 15 - 20 mins & I slows down in a traffic or check point, it doesn't accelerate immediately when I fire it to keep going. I have to fire for like 15 secs or more before it picks up & move on.

I also noticed that during that moment, there's a sputting noise coming from the exhaust pipe at the back, coupled with a sluggish movement. But all these stops the moment it picks up & start moving well.

my mechanic have changed my fuel pump, serviced my fuel nozzles & checked on my plugs, yet the problem persists.

Pls oga Gazzuz, help me out. This is the 2nd car I'm buying. The first one was a disaster & I don't want this to be such too

xplora98:
Negotiable

Good morning sir, kindly furnish me with the total amount to get RX 300, for 1999 & 2003 models. Pls give me the break down for each year so I can know the one to choose

bkay45:
Serious buyer should put a call through to me

Sir, any serious buyer will be more worried about the oil alert sign, than putting call across, don't you think so?

Export1:
2008 MAZDA 3 S
$ 850


https://www.auctionexport.com/en/Inventory/Info/2008-mazda-3-s-144899434?searchID=-1209427676#.XHQW9-hKhPY

Based on the link you gave me sir, check out these for me & their landing cost. pls no excuses on this

https://m.auctionexport.com/en/Inventory/Info/2005-honda-civic-lx-sedan-4-door-145061756?searchID=-15695681

https://m.auctionexport.com/en/Inventory/Info/2004-honda-civic-lx-sedan-4-door-145064474?searchID=-15695681

https://m.auctionexport.com/en/Inventory/Info/2004-honda-civic-lx-sedan-4-door-145060879?searchID=-15695681

Export1:
2004 HONDA CIVIC EX
$ 700

https://www.auctionexport.com/en/Inventory/Info/2004-honda-civic-ex-144209266?searchID=-1209427676#.XGKVOVxKiUk

Oga morning sir, I really want to buy a car from you. These cars looks damn cheap but other fees are the major issue.

How much will it take to bring this car to my door step?

OreSho:
Make we see na... So much wahala on buying, post make we see joor. Cos e be like say I don dey same shoes with you.

What was the same shoes?

I need a small, efficient & durable car to buy now

AuctionExport1:
Hello

Buy now $ 475

+$ 693 fees
+ ground $ 850+ Ocean $ 1275 ro-ro to Nigeria

Total $ 3293 total

Regards

Oga, I'm Interested but your fees are more than I expected, especially for a 2000 model car with a $475 price tag.
I want to by this for my old Popsi in the Villa.

Do something on the total fees let see if we can do business.

Remember my target is before Xmas

AuctionExport1:
Hello

Please check this vehicle
2000 TOYOTA CAMRY CE 4T1BG22K4YU742531

Buy now $ 475

+ fees
+ transportation

Let me know if you might be interested in this vehicle

Please email me if you are interested olga@auctionexport.com

pls give me the breakdown of the landing cost for this or something like this. I want something cheap, & I want it before Xmas.

once again, sorry for not mailing you, my phone functionality is limited

Export1:
2003 TOYOTA COROLLA CE $ 1,100

Make: TOYOTA
Model: COROLLA CE
Year: 2003
Mileage: 233454.0 Actual
Exterior Color: BLACK

https://www.auctionexport.com/en/Inventory/Info/2003-toyota-corolla-ce-135988942?searchID=-1563867749#.W5eOqehKiUk

Morning bro, I want something like this. 2003 - 2006 model. pls get me a cheaper one & give me the breakdown quotation for the landing cost. I will want it to be available before xmas

sorry for not mailing you, I'm on mobile with limited functionality

p

nawao

henrimax:
IKONZ,nice thread. Evergreen i must say, because your yesterday is someone else's today. May God grant your more success in your business.
I appreciate that your very much busy at the moment...work load n all. we thank-God for that, that's a good thing. However permit me to request you find some spare time to visit this thread from time to time, in-order to continue with practical knowledge sharing, cons n pros, do's n don'ts of printing business.

By God's grace with the experience you have already, your in a pretty good place to guide those of us that are interested in the printing business but confused and not sure how to go about it all.

Just hoping you will visit here again to give the likes of me proper direction.

Thanks to all that have been contributing(merchants,engineers,operators,press owners,etc) to this thread, please don't hesitate to continue to bless this thread with your insightful info...God bless.

Cool, that's very nice of you sir. Forgive me for seeing this comment now.

By God's Grace I will find enough time during the coming ember months so as to drop some good lessons on General printing and other logistics involved in the print industry

April 19th Born...here we go!

My first year in the Uni...06/07. Shared a room with a final, I saw hell, it was not funny indeed.

A bitter experience, Was extremely bullied & intimidated, then I made my first life vow.

....To be my own fvcking boss at all cost.

Alright sir, it's my turn now...lolzz

I need a direct Tokumbo Japanese/Germany diesel gen that can give me upto 6kw (6000 watts) worth of electric power. I dont want to go for those noisy lister engines, yet I dont have money for a brand new soundproof gen set.

I need advice on those portable, small soundproof disel gen. I hear of Robin, hyundai etc. Pls which one should I go for? can a 7.5kva of them give me upto 6,000 real watts.

I want it Japanese/Germany, I want it tokumbo

Hayyee2002:
Hello Ikonz and everyone please,

I just set up a business centre in Port Harcourt, d shop is quite large and has more room for other businesses.

I'm looking at acquiring a DI machine to start off a kind of digital printing press and I'm also fancing the idea of a large format printing on banners.

I need information on this DI machine, like what it can do, like type of paper it can print on and what it cannot do. I will also like information on a DI capable of up to A2 printing.

As for large format, I will want to start with machine dat can do up to six feet print out.

Is large format printer like DI available that can print on banners?

I like to know fairly used price of this printers.

Please I'm counting on your informed contribution. Thanks.

Sorry for the late reply sir, been quite for sometime now.

Alright, congrats on your newly acquired business premises. I must tell you this, business centre is one of the most lucrative business out there, that's if its properly sited and well managed.

Basically, a Direct Image machine (D.I) is a huge, digital and complex new model of the offset machines we used to know (Kord, sord, multilith, 201, 1850 etc). It is made to bypass separation and plate making process to give a direct print of what you have on the screen.

But What we know today and refer to as D.I. machine is a misnormer, an abuse of print lexicon and usage. They are merely a range of fairly used and new modern colourd copiers like the Konika-minolta bizhub series, sharp mx coloured series, Xeros, hp wide formats and others.

Technically, a D.I machine prints upto A1 sized materials - cards, paper, films, cloth, boards etc. But what we falsely label as D.I (konika et al) print only upto A3 size paper and cards,lol.

A good D.I machine will cost you around 45million to procure and install, but a sharp 41000N will slice off an estimated 130k at Ijesha, Lagos state

You wanna go into banner printing? Better go do an apprenticeship sir, before Alaba boys and those guys at Oduduwa warehouse use u complete their year project ontop PRINT-HEAD matter

onewithgod9:
....end time ex

Not at all. She is one of the best things that ever happened to me

Great500:
ur ex left after u made it?...hmmm.

Lolzz, what do you think?

xband:
Please Prof my sumec firman 8800 fpg e2 is so stiff to draw the rope. And the gen is not starting anymore with the key. But it cranks each time I try to start it. Please what do you think is the problem.

Hello, good day. i just got the 8800 model too, I also noticed that the rope is a bit stiff to draw, though the battery is okay. I really want to know if yours is serving you, how long have u used it and does it carry load upto the 6000 watts written on it?