₦airaland Forum

DonWhizy:
Yes I was but nothing from them ever since.

DonWhizy:
Second stage interview for Production Supervisor, Sagamu was conducted sometime in September between 20th and 22nd.

horhlarhshaynee:
None from my end.
The assessment took place about a month ago.

Mekzmoney:
Did anyone receive a mail for Nestlé Production Supervisor Test Assessment?

Please fellow nairalander, your help is needed at this point on what to expect ooh. Any little advice or clue would be appreciated.

remi4ever:
.. Check Everything: Take a peek at your brake lines, master cylinder, brake calipers, wheel cylinders, and hoses. Look for any wet spots or signs of fluid.

Cap It Tight: Make sure the brake fluid reservoir cap is snugly sealed. A loose cap can lead to moisture getting in and fluid loss.

Brake Pad Bonus: While you're at it, give your brake pads and rotors a glance. Worn-out pads can strain your braking system.

Get a Pro Opinion: If you can't spot the leak or you're not sure what's going on, don't hesitate to get a mechanic to check it out. Brake fluid is vital for safety, and driving with a leak can be risky.

Mekzmoney:
Did anyone receive a mail for Nestlé Production Supervisor Test Assessment?

Please fellow nairalander, your help is needed at this point on what to expect ooh. Any little advice or clue would be appreciated.

GAZZUZZ:
Replace both intake and exhaust to be on the safe side.

Find my number if you need more info

Henroo88:
Yes. Have u gotten any material on it. I need some oo

lilachiever:
165K at current BDC rate.

GAZZUZZ:
It can

seanfer:
You bought a wrong engine. So simple.

LandoKingz:
Senior Engineers in the house I need an injector mouth for my 2zz +Toyota matrix XRS where can I get it please my acceleration is malfunctioning goes high an low on its own, I use an audition spring to hold it but it's making the throttle body strong to depress I am in osun state Ilesa I have searched it here but have not seen it I need where I can get it thanks.

GAZZUZZ:
Just buy brand new parts.

Clutch pressure plate
Clutch disk
Release bearing

Good luck God speed.

Johnolis:
Same here, have not heard from them too.

GentlemanAyo:
Who else applied for the Technical Services Trainee role? It has been a while now and I haven't heard from AB Inbev. I just checked my portal now after a long time and it reads STILL IN PROCESS.

deawesomest:
Update guys.

So, my girlfriend got a call from SA asking to confirm her availability for a virtual interview. (my previous questions were all for love apparently).

Now I know people are gonna come up to me and ask "did y'all do choxe" or "did your choxe work that good?" Biko I dunno.

Please reach out if you've also got a call let's get ready together.

andyy:
please, does any one here have any idea about how much their pay is for packaging trainee n if there are other benefits like house allowance, HMO attached to it

Knigh94:
Well, the fact you used up to 5hrs does not make the test a 5hrs test.
I used 2hrs+ to complete all the sections. If you are familiar with the test style, it shouldn’t take you more that 2.5hrs. 5hrs is just too much.

Johnolis:
Yes, I received a mail for culture test. But no feedback yet after the culture test.
Any feedback from your own end?