₦airaland Forum

With #1400 you can get 3gig, and #1200 also can give same 3gig on glo cos i use both

nearest:
Does anybody know Any strong technician in Benin city?

dis depend on what u re repairing ur best is chinadu @ new-benin market(d upstairs b4 traffic light) the guy is good d best u can get

D.lee i install 4 a friend in benin city 2.4m the tin ok with 2.4m
Mbc 57%day time 60up at night
Aljaa 50%day but stable n52 at 9th
Dubi sports n HDs all good night or day.

leopower:
pls gurus i need help with dis, i drew a cable of abt 80 metre frm teh dish of a viewing center around my house so dat i can watch hotbird 13.0E, when it gets to my place i insert it into my diseq switch but i did not get any signal, when i run it directly to my decorder, the only frq dat came up was 10.797(h)27.499 with 60% signal. ple how do i improve on dis?

all ų need is a "signal amplifier". This topic was treated long time ago around season 3.

leopower:
pls gurus i need help with dis, i drew a cable of abt 80 metre frm teh dish of a viewing center around my house so dat i can watch hotbird 13.0E, when it gets to my place i insert it into my diseq switch but i did not get any signal, when i run it directly to my decorder, the only frq dat came up was 10.797(h)27.499 with 60% signal. ple how do i improve on dis?

all ų need is a "signal amplifier". This topic was treated long time ago around season 3.

@Lanceosas Τ̅Ħ̀ε̅ way ų position dish holder determine Τ̅Ħ̀ε̅ side it face what ɪ̣̝̇
mean ɪ̣̝̇
s that it may little to Τ̅Ħ̀ε̅ right or left.

@ɪ̣̝̇
hacked
your problem is at position dat ų have 11746 green is Τ̅Ħ̀ε̅ weakest point for dat frequ all ų need to do is turn your dish little to Τ̅Ħ̀ε̅ left or right note when ų use 90cm to get above 50% will lose some % in some dstv signal(frequency)

Ilish:
Yes my bro,it is very possible.Let w4 be the main sat,astra be on top of w4 while Galaxy on either left or right side of w4 depending on where you pick the signal.Patience is all what it takes.

it is very difficult like this, what u should note with 60cm if u main sat. is w4 ur astra will be under. The best way is to make astra ur main sat. n turn ur LNBF to 8o'clock than put W4 n ur LNBF to 2o'clock den bside (left or right) put ur galaxy LNBF but On 90cm. Just track astra, then Galaxy on top then W4. it's simple on 90cm than in 60cm

Thanks geometry

Gurus plz which type of gum should I use for foil my dish

Gurus plz which type of gum should I use for foil my dish

hooged:
can some1 please answer my question , i track w4 yesterday with signal strength 97 , all the fta channels pop up except rdv , can some1 help me with what may be the likely cause .

1 note RDV is not free so u can't scan it with free to air only just go to thier frequ. n scan it n u are good to go

Ok fellow connect ur pc to the internet pot on d back of d 69z go to option n do it as u do other dongle but this time d J tin
Note dat ur pc must b connected 2 d internet n u are good 2 go

iykemann:
bros have you tried it?

loud and clear. tryd and still using it with etisalat 100naira for 28 to 30hours

Just check d back dat expline it.
All congt. 2 the big hunters for huntin d priceless gift of God.

What i mean is that with 4669z and internet connection connected to it it becomes dongle and it open all , BB n other i mean all

It has dongle in it

4669z is something you should go for if u have internet connection n use 2 dong. tin cos it is da bomb

@all dish has alot to do with signal qulty. cos i track with space dish i was hittin 25% wy with strong n DSTV dish i was hittin 45% on int17(d same place) same with the W3 mbc

Adex70:
@larryenob the problem u are enconter is 4rm the setting of your decoder, go to menu then settings then check if the donggle or wireless and the rest are on change the setting, and it will be ok i have such probl 2weeks ago.

thank man i will do that and give you feed back.

this a small but mighty problem i install W7 and ASTRA2B. the problem is that when i use dist. switch one of them will be working 1st i tot it was the switch den i use 3 diff. switch same problem occur when i connect independently they will be working 2nd i tot it was the LNB so i change the two LNB 3times yet same problem 4 all my years of installation today i felt like a novice pls i need help on dis ASAP PLS

08036505151 benin city

TOWNJUJU:
Gurus, i jst nailed w3a 4a client wit srt4652 decoder wit tp 12728H30000 all other channels popped out but mbc3 refuse 2come out on d tp 11192H3210. When i used my 69x & blind scan it popped out like popcorn. I told him to go get 69x but he refused. Pls any other solution aside d once we hv here?

you would have delete the old TP and input it again you good to go

let take note of something all we have done this season5 is software n upgrading without any meaningfull hunting pls n stop asking stupid question, like intr906 on 90cm

comfirm they are back

comfirm they are back

iykemann:
all,I need help with my 69x,it started having signal problem,whenever I change from one frequency to another it takes so long to show,and it takes longer when I'm changing from one satellite to another,like changing from multi TV to DSTV,pls anyone with Idea will be wellcome,I'm usin 120p and it's benn long I started using it.

the problem is not ur receiver but the switch i use to hv same problem just get a good switch

the two big diode on ur power pack

ABUTHAOBAN:
my decoder is giving me problem.
when i power it, it will display lnbf even if i switch it off and remove the coaxial cable. it is still the same problem. pls i need help.

this a simple but complicated. what u should no is that it is a power problem, just change ur (D8) on power panel n u are good to go simple but complicated if u do not no how 2 lead or soda

@all
this is the spirit of friendship, we query we make peace yet we appreciate one another
MERRY XMASS TO U
@BADARU HAPPY BDAY MANY MORE YEAR AHEAD BRO
f.t.a. 4ever

@All
we all are making this forum boring, let call a spade a spade. i have be on this forum for almost 3years now but my post is not up to100 you no why a take time to read part 1 n 2 all these question that are ask now was ans. in part 1,2,3,4 now part 5 when are we going to lean. i join foreign forum all i did was to write thank you on the wrong place b4 i no what happen i was ask to use the right mean and my post was deleted but here if we say the same we take it as insult. I believe if take time to read part 1,2,3,4 you be come world class installer. This from me to us All HOPE WE LEAN
LET use freshp as an example i remember when he was ask how he could change his HItv to free to air he take his time to lean but today he his among elder of this forum ask him



FTA 4 LIFE

@All
we all are making this forum boring, let call a spade a spade. i have be on this forum for almost 3years now but my post is not up to100 you no why a take time to read part 1 n 2 all these question that are ask now was ans. in part 1,2,3,4 now part 5 when are we going to lean. i join foreign forum all i did was to write thank you on the wrong place b4 i no what happen i was ask to use the right mean and my post was deleted but here if we say the same we take it as insult. I believe if take time to read part 1,2,3,4 you be come world class installer. This from me to us All hope lean



FTA 4 LIFE

geefivez:
@kingskene, thanks for the site, but i dont know which stb to download from the site because i dont see a particular stb for 4653x.
Anybody dat have a trusted stb for 4653x to plz send it to my mail geefivez@yahoo.com

@ geefivez you should note that we have treat this issue b4 just that many people will not lean
go to www.sat-planet.net download strong with 4651x_4654x this includ your 4653x so next read b4 you ask