heed101:
I got some stations while rescanning my multitv . they are seevii, cartoon network Arabian and rt Arabian.

Are they free and showing?
What TPs are they plz?

Gurus,

There is big problem here o, I joined my wire together with this straight 2 ways connector,all signals from all the 4 satellites are OK and exactly the way they are when I tracked them using single and short wire between diseq and the decoder.Max TP was at 80% before connecting the 2 wires together,it becomes red when I connected the two wires together using the connector.
Note: only 11595V30000 has that problem.What can I do plzzzzzzzz?

lincolnola:

Waaaaoooo!
emovies HD and trace sport stars? That means I have not started at all coz I didn't get them and beside, if I so desire to use the attachment for 7e instead of 5e, is it possible on 1M dish?

odilibe:
yes 7e is possible..,

Boss,
You mean I can attach 7e below the primary 16e on my 1M dish? Coz none of the TPs you gave for 7e flash green ooooo

odilibe:
..but at least you should be able to get all the TPs at 5east with one lnb excluding 7east with 1M dish"..if you position the lnb correctly...even transponder 11996 V27500@5east..hosting eMovies extra HD and trace sport stars....FTA!

Waaaaoooo!
emovies HD and trace sport stars? That means I have not started at all coz I didn't get them and beside, if I so desire to use the attachment for 7e instead of 5e, is it possible on 1M dish?

odilibe:

12034V27500 @5°e VS 10930V30000@7°e

@ Odilibe
I tried using one lnb for ses5 and 7e using the above TPs, only 12034V 27500 hit green @ 60% on 1M dish. 7e did not flash green at all

DoctorHindus:


if u av another decoder then connect from lnb out loop from ur 4922 to the lnb in loop of the other decoder in ur inner room.

I equally have srt 4663x and I don't think it can work with such looping as it is not HD compliant. Just my view anyway

odilibe:
...

Chief Odilibe,
How much is this unit and where can I buy it?
Can't video sender equally do the magic? And if yes, where can I buy one as it seems the video sender is off market now.

Gurus,

Pls, how do I connect my 4922 decoder to another TV in the room as it doesn't have RF out?
Thanks for response.

ben1daEbiri:
On my setup,12522V30000 is just barely 65% and all the other T.Ps are working fine.After the upgrade,I tried tracking multitv separately on a single dish (All these while,I always attached it to 16E as secondary using flexible wire) but couldn't hit green;I had to skew my LNB to H polarisation (7 or 8 O'clock) and hit 88% without hassles;What I'm saying is that any persons have issues with 12522V30000 should just skew to 8 O'clock and you'll hit green in no time.Then for those who have 16E on their combination MUST make sure they DON'T use the same T.P for both birds as some receivers will see the two T.Ps as the same i.e Don't use 12522V30000 and 12522H30000,Instead use 12525V30000 for 28E and 12521H30000 or any other close T.P but they should not be the same.Some strong boxes are even guilty of this.Then again,If you're using a diseqc,DON'T use ports parallel to each other for 16E and 28E.We've gone a long way and achieved giant strides here,these are issues already discussed in part 1 of this thread,I don't think basic Ku-band problems should be an issue after we've tackled trickier C-band issues.FTA rules!One love!!!

Boss,
What do you mean by parallel ports? Do you mean 1 and 4 or 2 and 3?

graphicicon:
@lincolnola, as long as ur old mytv channels are working especially TP 12.722 H 26.657, thats means ur cable and diseqc swith are perfectly ok, the lnbf is the fault, and i think u are using startime black lnbf, cos using the mention lnbf this TP 11.595 V 30.000 will never turn green, try and use strong short neck lnbf and give testimony to the house, thanks

@ Graphicicon
Thanks for your response.
All my lnbs are strong types. I used the old long strong Lnb for 16e, the new short HD strong for MultiTv and the old Long strong Lnb for MyTV.

Chinedu7:

Try and run your cable direct, bypassing the diseq, if the Tp 11595v 30000 comes out then the diseq is faulty, change the diseq but if it doesn't come out, try another cable direct and see if it will work. It could be the input cable.

Okay Boss,
I will do just that when light comes back, but am not really sure if the fault is from the diseq as it is working for the 3 Sats I combined just that some TPs are not green at all

Chinedu7:

If you are sure that the diseq is OK then follow this steps. 1st delete all the channels from Astra. 2nd check the diseq number you gave to Astra, after noting the number, scan through the Sat list to make sure you didn't use the same number on another Sat for 28e. Reason: if you have scanned Astra 28e through different SATs, they will clash, at times you will get no signal or unsteady signal. After doing all that trouble shooting, blindscan again but in this kind of case, it's mostly a fault of diseq or the output cable that runs from diseq to decoder. You can consider running a fresh cable if you have one.

@ Chinedu7,
I have checked the Sats lists and discovered that I has assigned some diseq numbers to Badr 26e and 36e before.
I off them and deleted all the channels as well as the TPs in all these Sats that I tracked before I.e
Badr 26e, 36e, and even the 3 Sats I combined together in the diseq.
11595 V 30000 didn't pop up.
Note: I have MultiTv, 16e and MyTV on this diseq and I use 4922 decoder with patch 1.97
What else is still wrong or I can do?

All,
I tracked Using max Tv TP @ 11595 V 30000 but when I combine the rest sats in diseq, the TP turns red.I have blindscan and even deleted some TPs but still red.
What can I do?

odilibe:

See rugged setup/ 5°east lnb position@the lnb arm!..may be u should target only one of the sat between 5e and 7e with one lnb....

@ Odilibe,
On your setup,which sat is the primary and the one below the primary?
Should the LNB for 5°e and 7°e be attached to the right hand side of the primary when facing the dish?
And must it be closer to the primary LNB holder or along the arm?
Lastly, what are the best TPs for tracking the two Sats?

lincolnola:
Gurus,
Good afternoon, I nailed 16°e as primary on 1M startime dish,I added 28.5°e (multiTv) on top.I tried adding SeS 5°e vs 7°e below the primary LNB holder to no avail using these TPs; 12034V27500 @5°e VS 10930V30000@7°e.
Please, are the TPs not good for tracking these birds or where am I getting it wrong? ??
Please, educate on how to hunt these 2 birds using one LNB as attachment to the initial setup.
Thanks

Pls, I need urgent response to this issue

Gurus,
Good afternoon, I nailed 16°e as primary on 1M startime dish,I added 28.5°e (multiTv) on top.I tried adding SeS 5°e vs 7°e below the primary LNB holder to no avail using these TPs; 12034V27500 @5°e VS 10930V30000@7°e.
Please, are the TPs not good for tracking these birds or where am I getting it wrong? ??
Please, educate on how to hunt these 2 birds using one LNB as attachment to the initial setup.
Thanks

ojayunited:
@ Spandy, TVC is showing @ my end. What u nid to do is just to rescan ur decoder with d same TP or change ur VPID to 1121, APID to 1120 & d last one to 1120.

Chief,
Please how do one change VPID and APID?

liquidheaven:
Ago available at @180.5 DPK @178.5 please call or watsapp 07061842676 to order

@ Liquid heaven,
Does this DPK at 178.5 covers delivery too and if yes, is it pay on delivery basis? ??
Thnx

etonslogistics:
I need bulk buyers of PMS
stock available @ Akwa-ibom depot
price is N130\L
min req: 500kLiters.
08037203269
only serious buyers.

BLACK AGO available N140\L
location is Lagos
pls no POs

Chief,
What of DPK?? Do you have and how much is your Depot price?

All,
Pls, how much is the current loading/Litre of DPK and PMS from depots?

odilibe:

yea..you can use 1m dish for those satellite angles. I have tracked 16°e,28°e 5°e and 7°e on 80cm dish with 4lnb(s)....
this is how it was done..16east lnb as the primary..28east lnb on top of 16east!7east lnb attached @ the right of the lnb arm below 16east while 5east lnb attached to the lnb arm was below 7east and the lnb was manoeuvred to get 5east..slightly pointing upwards touching 7°east lnb!..but signal lose @5°e was terrible! and this was done on 80cm dish!..since you are using 1m ..you can still try 5°e and 7°e with one lnb..

Great Guru,
Thnx 4 your response.
What TPs can be used if am to track 7°e and 5°e with one LNB?
Thanx

[quote author=lincolnola post=49295122]Gurus,
I have 1m startime dis.
Pls, can I use it to track 16°e,28°e,26°e,SES 5°e and 7°e together?
Thnx for ur response

Gurus,
Pls answer this question.

Chinedu7:

You may have another TP that clashes with it, reason why it turns red. Why not just do being scan and savedeo yourself stress of looking for TP to delete.

Ok,so you mean that the TP clash has to do with diseq combination?
When I connect it alone and directly to decoder,12722 and 12724 H/V pops green but when I put it in diseq, they are red

Chinedu7:

Similar or the same TP under the Sat in diseqc.

@ Chinedu7
Pls explain it better to me,I don't understand what you mean at all.Besides,I combined 4 sats in the diseq with mytv.
And pls,give me solution to it too.thnx

Gurus,
12724H/V on mytv usually go red on diseq but green when connected directly. Pls,what could be the problem?

lincolnola:
Gurus,
I have 1m startime dis.
Pls, can I use it to track 16°e,28°e,26°e,SES 5°e and 7°e together?
Thnx for ur response

Gurus,
Pls answer this question.Thnx

[quote author=Yinka4dad post=49342563][/quote]

@ Yinka4dad,
Thanks, which of the 2 dishes is eutelsat 9A?
One is having only one LNB while the other is having 2 LNBs.

Is it eutelsat 9A on east or west

Yinka4dad:
they are fta.with d sat decoder

Ok.what Satellites are they then? You can ask him

Yinka4dad:
Hello guys pls I need ur help I saw this setup at a friend place but the sat is eutelsat 9A with a D-sat decoder.but station there are cnn,nickolodeon,afn sports,movies etc.i just want to know the kind of set up for the 2 dishes.am just confused.thanks

Chief, are the stations FTAs and if yes, you can as well ask that ur friend but I think those dishes are on the west side eg spacecom

incolnola:
Gurus,
I have 1m startime dis.
Pls, can I use it to track 16°e,28°e,26°e,SES 5°e and 7°e together?
Thnx for ur response

mujaya1:
yes you can, first track 16e as a primary,then 28e as secondary,track ses5e below 16e together with 7E

I have tracked 16°e as prinary and 28°e on top.
If am to add SeS 5°e n 7°e, which side of the dish wil I attach the two LNBs or can one LNB pick both 5°e and 7°e?
Pix of the setup would be appreciated.thnx

Gurus,
I have 1m startime dis.
Pls, can I use it to track 16°e,28°e,26°e,SES 5°e and 7°e together?
Thnx for ur response

Gurus,
I have 1m startime dis.
Pls, can I use it to track 16°e,28°e,26°e,SES 5°e and 7°e together?
Thnx for ur response