₦airaland Forum

Good day house,

My epever charge controller just stopped working after the installer tried to change the inverter from luminous to blue gate... it jsut ddnnt come on again. He said it is temperature sensor. Could this be true. Please i need the expert's opinion on this. The bluegate inverter is new. 24V 2KVA. MPPT charge controller is 40A. solar capacity is 1200W. Thank you

Please can you help list the top five 2.5KVA inverter?

earthrealm:
ok, stilll a lil crude, as it simply groups batts into flooded, sealed etc...and doesnt state the corresponding voltage charge setpoints..

take quanta batts for example, its float is 13.5v, boost 13.8v, while Long Batt has float 13.8v, boost 14.6v, and they are both smf agm batts.
so hope you now understand, the shortcomings of the luminous inverter

good the owner 's primary charging source is solar, and not grid.
left for me luminous isnt in my top 5 chinco makes when am considering a serious 2.5kva and above inverter...unless its for off grid installation

please kindly send to osamikat@gmail.com. Tanks

Please can you recommend a good GIS training centre in Lagos with training scheduled for September? Thanks

Please everyone, @7thCANON , can you recommend a good GIS trainign center in Lagos. Thank you.

Please is there anyone that can recomend a good training centre that offers training advanced data analysis or health mapping, preferable in Lagos. it is urgent please. thanks.

Please, can anybody help me review the Prag 2.5kva inverter or direct me to a link where i can get review or more info about the inverter. I found out that mine doesnt charge at certain input voltage, even as high as 157V and what is the importance of the 10A and 20A button behind the inverter with respect to charging current or voltage . Most times, i have to use a stabilizer before it charges..

2. the voltage reading and battery level on my CC is always different from the battery level on the Prag inverter. WHich reading should i trust most? Thanks

1. I have 2 No's 180W/24V solar panels.
Vmp=36.72V
Imp=4.91A
2. I have 1 no 200W/24V solar panel
Vmp =34.56V
Imp=5.71A
3. 2.5KVA/24V Prag inverter
4. 30A/24V solar PWM CC
5. 2 luminous 200AH /12V batteries
expected load is 360W to run for 6hrs each day
please, for the solar panels, what's the best way to connect it and how much power (Pmax) can I get all things being equal given the panels have different specs.
also what's the best type of wiring to use...6mm or 4mm
I am asking all this because where I reside, you find a lot of people parading as inverter specialist but in actual fact, dey are technicians with limited knowledge. intact a schematic diagram of d connection would be appreciated.. thanx...@richmon74, @kiekie1, @juo and all my ogas in d aus.

anyone in the house, please help...
1. I have 2 No's 180W/24V solar panels.
Vmp=36.72V
Imp=4.91A

2. I have 1 no 200W/24V solar panel
Vmp =34.56V
Imp=5.71A
3. 2.5KVA/24V Prag inverter
4. 30A/24V solar PWM CC
5. 2 luminous 200AH /12V batteries

expected load is 360W to run for 6hrs each day

please, for the solar panels, what's the best way to connect it and how much power (Pmax) can I get all things being equal given the panels have different specs.

also what's the best type of wiring to use...6mm or 4mm

I am asking all this because where I reside, you find a lot of people parading as inverter specialist but in actual fact, dey are technicians with limited knowledge. intact a schematic diagram of d connection would be appreciated.. thanx...@richmon74, @kiekie1, @juo and all my ogas in d aus.

To say I have learnt a lot from this thread is an understatement...I took as a gamble as a newbie to d forum and ordered a product from @kiekie1, to sokoto. the speed with which it was sent and delivered promptly with constant follow up from him to ensure good was delivered safely was simply amazing....its comforting to know der are still trustworthy people that you can transact business with online. tanx @kiekie1. thank u house for d beautiful lessons you dish out everyday.

To say I have learnt a lot from this thread is an understatement...I took as a gamble as avnewbie to d forum and ordered a product from @kiekie1, to sokoto. the speed with which it was sent and delivered promptly with constant follow up from him to ensure good was delivered safely was simply amazing....its comforting to know der are still trustworthy people that you can transact business with online. tanx @kiekie1. thank u house for d beautiful lessons you dish out everyday.