Good evening house. Pls my tec junior of 9 months started giving me issues this week.
1. It dries up a full tank of oil daily on an average of 6-7hrs daily
2. It smokes a lot.
Please what do you suggest I do.

donshady:


Change of OIl
Change of Sparkplugs.
clean Air Filter.

if you use 4hours daily then you can change oil every month and clean your spark plug.
Read my previous post or few pages back where i mentioned the fuel consumption.

Thanks boss. This is very helpful.
I got the TEC 3.75kva electric start and I got about 14hours with approximately 11L of fuel. The load on it for now is 1 bedside fridge, TV, 3 standing fans and bulbs.

macromyk:
Good evening house. Pls my tec junior of 9 months started giving me issues this week.
1. It dries up a full tank of oil daily on an average of 6-7hrs daily
2. It smokes a lot.
Please what do you suggest I do.

Needs new ring and piston

081087n:

Needs new ring and piston

Thank you sir

Pls how much can I get an Elepak 4.5kva manual generator, and how can I know if it's the original, cos I don't trust the prices online. There are too many cloned generators out there.

Please this is urgent, thanks in advance.

081087n
donshaddy

Good evening pls engineer here how can I protect my sumec firman 3000spg new one from making noise

edimolu:
Pls how much can I get an Elepak 4.5kva manual generator, and how can I know if it's the original, cos I don't trust the prices online. There are too many cloned generators out there.

Please this is urgent, thanks in advance.

081087n
donshaddy

So sorry this came late for the price 150+170k
For the authenticity. It has to be copper coil and epepaq crested on major part of the gen set.. of they can open the coil for you scratch it with a Sharp object or something hard if it's peel off to be white or silver in colour it's aluminum, but the best bet is to go with an engineer.
One thing I have noticed is that irrespective of the genuity of a gen it all boils down to the usage and maintainance culture.

Please where can I get piston and rings for Tec-OPT 2500MS? Firman piston is slightly longer than the one in the TEC.

edimolu:
Pls how much can I get an Elepak 4.5kva manual generator, and how can I know if it's the original, cos I don't trust the prices online. There are too many cloned generators out there.

Please this is urgent, thanks in advance.

081087n
donshaddy

Just buy Thermocool or Sumec Fireman generator from their accredited store and have peace of mind....

My Tec gen Igwe 8100ES Amateurs coil got burnt. The technician boy said if I want to recoil 25k and if I want to buy another coil 30k ,please I need professional advice on what to do

enochogaga:


use a well regulated stabilizer, I know u believe or u must have heard that stabilizer damage Gen, but that not true, is just a lie of the ignorance on Gen field,

but don't use qlinck stabilizer

Just curious, any guru knows why qlink stabiliser should not be used on a gen?

Ambihill:
He Prof.
Please I'm a first timer. Kindly advise on Firman ECO3990ES and ECO4990ES: the fuel consumption, performance efficiency, are they of different capacity or the same working capacity with different rating, KVA and would you recommend it or there are better alternatives? Can any of the two carry 1.5 Samsung inverter ac with iron at the same time or 1.5 inverter ac with 9kg washing machine or 1.5 inverter ac with standing fridge at the same time?

Thanks

between the two firman options up there, with the highest combination of loads listed, go with the firman ECO 4990ES.

Israeltt:


Thanks boss. This is very helpful.
I got the TEC 3.75kva electric start and I got about 14hours with approximately 11L of fuel. The load on it for now is 1 bedside fridge, TV, 3 standing fans and bulbs.

how much did it cost you when you purchased it?

TrebleChamp:
Just buy Thermocool or Sumec Fireman generator from their accredited store and have peace of mind....

Thanks bro, I stay in ibadan and I'm not sure if there is any accredited store here, or you have an idea?

081087n:

So sorry this came late for the price 150+170k
For the authenticity. It has to be copper coil and epepaq crested on major part of the gen set.. of they can open the coil for you scratch it with a Sharp object or something hard if it's peel off to be white or silver in colour it's aluminum, but the best bet is to go with an engineer.
One thing I have noticed is that irrespective of the genuity of a gen it all boils down to the usage and maintainance culture.

Thanks a lot bro, I appreciate the time. If you were in my shoes which would be your best take, Elepak 4.5kva or sumec firman 4.5kva

edimolu:


Thanks a lot bro, I appreciate the time. If you were in my shoes which would be your best take, Elepak 4.5kva or sumec firman 4.5kva

I'll go for either
Sumec firman or thermocool but might be costly, but Worth it 100%

081087n:

I'll go for either
Sumec firman or thermocool but might be costly, but Worth it 100%

Alright, thanks.

You have been helpful!!!

Baylam:
My Tec gen Igwe 8100ES Amateurs coil got burnt. The technician boy said if I want to recoil 25k and if I want to buy another coil 30k ,please I need professional advice on what to do

Contact any of their repair centres close to you and buy a new coil.

edimolu:

Thanks bro, I stay in ibadan and I'm not sure if there is any accredited store here, or you have an idea?

Try Google search Thermocool Store in Ibadan, i believe you will find an address...

Good morning. Please My generator keeps having a fluctuations output supply and this makes my appliances gets burnt. Two charges burnt already.

What can I do to resolve this? Gen is a 2.8kva Lutuan gen.

Since you stay in Ibadan, try any of the stores below
VOYLES MELODI NIG LTD 104/100 Iwo Road Ibadan Oyo State 07063663604

VOYLES MELODI NIG LTD MRS FILLING STATION ,CHALLENGE BUS STOP,IBADAN 07063663604

TEMITAYO ADENIRAN STORES Beside First Bank Plc,Owode ,Oyo,Oyo State 08073439358, 08148931199, 08077892603

VOYLES MELODI NIG LTD 104/100 Iwo Road Ibadan Oyo State 08140663737

SMART PRICE VENTURES(NEW No. 1 Queen Elizabeth road, Mokola Ibadan

I got these contact directly from Thermocool support agent when I was looking for a good store to buy from.
Just in case you are in doubt, just go to thermocool official website and chat with their customer service agent. That's how I got the information....... BUT, be ready to negotiate the price oooooooooooooooooooooooooo.

edimolu:

Thanks bro, I stay in ibadan and I'm not sure if there is any accredited store here, or you have an idea?

crossfire47:

how much did it cost you when you purchased it?

I bought it for 212k at the Iwo road showroom but the price tag on it was around 225k

PLEASE I NEED HELP WITH THIS. Thank you!

kunmi007:
Please where can I get piston and rings for Tec-OPT 2500MS? Firman piston is slightly longer than the one in the TEC.

kunmi007:
PLEASE I NEED HELP WITH THIS. Thank you!

Go to their service center.

Israeltt:
Since you stay in Ibadan, try any of the stores below
VOYLES MELODI NIG LTD 104/100 Iwo Road Ibadan Oyo State 07063663604

VOYLES MELODI NIG LTD MRS FILLING STATION ,CHALLENGE BUS STOP,IBADAN 07063663604

TEMITAYO ADENIRAN STORES Beside First Bank Plc,Owode ,Oyo,Oyo State 08073439358, 08148931199, 08077892603

VOYLES MELODI NIG LTD 104/100 Iwo Road Ibadan Oyo State 08140663737

SMART PRICE VENTURES(NEW No. 1 Queen Elizabeth road, Mokola Ibadan

I got these contact directly from Thermocool support agent when I was looking for a good store to buy from.
Just in case you are in doubt, just go to thermocool official website and chat with their customer service agent. That's how I got the information....... BUT, be ready to negotiate the price oooooooooooooooooooooooooo.

Thanks bro, I appreciate.

But omoh I no go fit run am, thermocool price no be here for the 4.5kva. My budget is 150k or at most, a top of few thousands to that.

It's either sumec or elepaq, if you have a good store for this, I'll appreciate.

..

crossfire47:

between the two firman options up there, with the highest combination of loads listed, go with the firman ECO 4990ES.

Thanks Prof for the feedback

edimolu:

Thanks bro, I appreciate.

But omoh I no go fit run am, thermocool price no be here for the 4.5kva. My budget is 150k or at most, a top of few thousands to that.

It's either sumec or elepaq, if you have a good store for this, I'll appreciate.

Original Sumec 4.5kva is over 230K. That Elepaq is far from 4.5kva in reality. Your budget may not even get you a 3.5kva generator currently.

Gptech:

Original Sumec 4.5kva is over 230K. That Elepaq is far from 4.5kva in reality. Your budget may not even get you a 3.5kva generator currently.

You know of any store in Ibadan you can recommend? One that sells either of them, top quality.

edimolu:

You know of any store in Ibadan you can recommend? One that sells either of them, top quality.

No I don't.

Do you want to execute a Solar System Project and you need reliable and quality batteries? Mary-Victor Engineering is a home of quantity GASTON Battery, we have all sizes in stock. You can Call/Watsapp us 08066332919

The picture below is 2V:1500AH Gaston Battery, it is available in large quantities.

Our offices are in Lagos & Abuja, we do nationwide delivery.

edimolu:

Thanks bro, I stay in ibadan and I'm not sure if there is any accredited store here, or you have an idea?

Go to Iwo road sir