₦airaland Forum

Neoteny7:
Hmm...

pocohantas:
Since you already have POP cement and paint...

I will advise you take out the tyrods of your ceiling. That is those borders of the slate. It is something you can remove yourself.

Once it is out, your ceiling would be a flat surface with just the wooden edges exposed. Proceed to fill it up with the POP cement. Then paint with white emulsion paint.

If you want, you can add POP light or just leave it bare.

Screeding your walls and painting it won't give you the desired look if you ignore that ceiling and if you decide to fix the ceiling later, the process would ruin the walls.

---

POP on slate is ideal for people on budget or minimalists. Most POP guys would refuse to do it because they rather you give them 200k.

Is this DIY?

fuckboys:
but those tyrods are what holds the ceiling board frames in place, the boards will fall off if he remove them.

sholikay:
wow...nice one......even as an interior decorator,I love how you suggested this to him for the ceiling..🙌🏼🙌🏼

alasane:
Why pushing this kind of craps to front page ??



Cc
Lalasticlala
Ishilove
Semid4lyfe
Obinoscopy
mynd44

Slynation:
As long as it's a screeding job, that process is shining, you might want to use polishing when it's stuccor work process...

Chai...I just feel OP is wasting money. He should have prime the walls with emulsion paint, then sandpaper it and fill the necessary holes, then use a silk/satin paint to give it a shining look... Either way, you get a shining looking surface on a lower budget.

Zubby2005:
I'm not planning on doing so;
It's wood so why put POP

ppogba:
I just hope you are not the one who claimed he could feed my family for ever.

fuckboys:
but those tyrods are what holds the ceiling board frames in place, the boards will fall off if he remove them.

frugal:
You don't necessarily have to do pop. Remove the 2x2, and screed the entire ceiling. Then get wall cornice for the sides. To go further, get 4-10pcs of 3watts led panel lights, and have your electrician cut the ceiling to install them. Very cheap.

Odunayaw:
You no read where him write say na im family house nii

Teejayadex:
You know the best for you sha, don't you think for that your area, if you join 100k you go rent better house wey get everything wey you go help this landlord build for him house, because the landlord go soon increase your rent oo, if you no pay, na him first son go pack enter.

sholikay:
you can't still compare it with screeded walls..especially if the walls are distorted or wobbled and needs to be filled up with putty or screeding material..

Zubby2005:
So far so good;
The screeding is done and time for the painting but I've decided to POP the ceiling so that it'll look standard enough
Below are the attached photo progress
I'll update yall on the price of POP later when I'm done bargaining

alasane:
Why pushing this kind of craps to front page ??



Cc
Lalasticlala
Ishilove
Semid4lyfe
Obinoscopy
mynd44

frugal:
You don't necessarily have to do pop. Remove the 2x2, and screed the entire ceiling. Then get wall cornice for the sides. To go further, get 4-10pcs of 3watts led panel lights, and have your electrician cut the ceiling to install them. Very cheap.

Slynation:
Yea...sure, I know, but I'm considering the nature of the room because screeding looks more good with conduit wiring.

SuperOnyi:




Rich kid!

I've never held such amount in my life

odenkirk:
the mod that push this crap to front page needs to be sacked asap. @seun

sholikay:
haaa...you wan put am for gbese..... He would be spending 192,000 naira to cover the square meter of that room ceiling only...

pocohantas:
Since you already have POP cement and paint...

I will advise you take out the tyrods of your ceiling. That is those borders of the slate. It is something you can remove yourself.

Once it is out, your ceiling would be a flat surface with just the wooden edges exposed. Proceed to fill up the exposed wood with the POP cement. Smoothen properly, allow to dry and paint with white emulsion paint.

If you want, you can add get an electrician to add POP lights or just leave it bare

Screeding your walls and painting it won't give you the desired look if you ignore that ceiling and if you decide to fix the ceiling later, the process would ruin the walls.

---

POP on slate is ideal for people on budget or minimalists. Most POP guys would refuse to do it because they rather you give them 200k.

Is this DIY?

BadMaster:
Can you tell us the negative effect this thread has on your life, directly or indirectly?

Neoteny7:
Hmm...

odenkirk:
the mod that push this crap to front page needs to be sacked asap. @seun

callmevirus:
You dey knack inside that room?

Pkid1:
Wetin concern you now. Bad belle, no go renovate your bar room. Ode

Zubby2005:
Hello y'all;
I've dedicated my time to show my progress of how I'll transform my 12×12 room to a paradise within a span of 1 month with costs included.
Firstly, I'll start with the painting.
My room have former paint coating on it which most of it are peeling off so I went with the idea of screeding it before painting.
The paint is light gray satin which cost half bucket for 20k at a local shop(produced there too)
Below are the images of before any work was being done

phorget:
Hope you'll pull down that horrible ceiling and install POP?

youngreezy:
Op no mind all these people wey dey say make noise about your ceiling oooo,Dem no know wetin life dey talk....anywhere your power reach you do am