₦airaland Forum

ucheo:
My kwese sports on 68.5 is showing scrambled. How can I input biss key to my decoder Digicom 9000 HD. Pls someone should help

grafikii:
Thank you very much dlee1 i will work on these and get back to you.
At what signal quality percentage do you get close satellites like multitv and 36e. This will guide me in getting it right. Thanks again

Dlee1:
Hello grafikii,
after the construction of my dish, nilesat was the first satellite I tracked. I got 40% with my sate tracker (11938 V 27500). I adjusted the focal length of the dish until I got 68% with my sat tracker. I later moved my dish to hotbird then to Eutelsat 7A @ 7°E. Again to 9°E...

After adjusting the arms try 7°W with 11559 V 27500 and blindscan if the percentage you are getting on the above transponder is high.

Dlee1:
I believe it is possible since 3°W is not far from 7°E though expect only the strong transponders (frequencies). To be specific, I have not tried it.

bbally:
please, can iget the picture view of 3w in combination of 7e/5e. thanks

Seyilome:
I tracked tstv and 5.e w together today, tstv as primary.

joosat:
Yes i think the correct lnb supporting arm is 193cm and 162cm for lnb arm because that's what I use and more so he should use normal lnb holder and he should leave some space like 2.5hinch at the edge before putting plastic lnb holder

Dlee1:
Hello grafikii,
after the construction of my dish, nilesat was the first satellite I tracked. I got 40% with my sate tracker (11938 V 27500). I adjusted the focal length of the dish until I got 68% with my sat tracker. I later moved my dish to hotbird then to Eutelsat 7A @ 7°E. Again to 9°E...

After adjusting the arms try 7°W with 11559 V 27500 and blindscan if the percentage you are getting on the above transponder is high.

bbally:
please, can iget the picture view of 3w in combination of 7e/5e. thanks

joosat:
Yes i think the correct lnb supporting arm is 193cm and 162cm for lnb arm because that's what I use and more so he should use normal lnb holder and he should leave some space like 2.5hinch at the edge before putting plastic lnb holder

bbally:
please, can iget the picture view of 3w in combination of 7e/5e. thanks

grafikii:
God bless you dlee1, i try again midweek

paulowas:
The first pix comprises of 7w,3w as primary and 5e
and this one is just 3w and 7w

gregs:
Can u pls give me d tp and d position of ur lnbf u used to track tstv, I v bn trying to track it since yesterday

Seyilome:
I will snap the picture tomorrow, use the normal 11052 V 30000 or 11168 H 30000. let the cable cord of ur lnb @ 4 oclock with patience

Seyilome:
Who has a fairly used strong decoder 4922A for sale in OSOGBO

Chinedu7:
I understand the anger and anguish but let's be honest to ourselves, we have to behave like matured people because I don't believe we have a 10 year old child here.
I have been personally blocked 2 times for posting keys here because it's not allowed, we all know that. I also said that the keys will be everywhere very soon, that is fact. But don't forget that the biggest problem is the bloggers but they haven't got it to share at the moment. If we had circulated the keys openly here, they would've got it from us and publish and the provider will take action.
It's obvious it won't last forever but our actions can make it last longer. I have no problems with sharing Keys, infact after taking it down, I shared to emails and WhatsApp for 2 days, I couldn't even work in my office. It was intense, I decided to take a break and others who got it from me to help those in need.
It has to be the way to go here, we need to move on and act better, it's for everybody's benefit and nobody should feel as the most hated.
I appeal to those who have it to try and accommodate others via email. And please if you get it don't post in any open forum or social media.
At the moment the keys are still not open because we have acted well so far, I have to thanks those who got it earlier for their professional behaviour. Let all of us do the same, it's only for our greater good. Thanks.

kd10:
Good day Guru's in the house,pls can strong decoder auto roll bizz key? If no which decoder model is effective & good for Bizz key auto roll aslo powervu? Advise needed Thanks

Ismy5000:
Let him use 11168h30000 To track. The tp comes faster than Tstv tp

Chinedu7:
I understand the anger and anguish but let's be honest to ourselves, we have to behave like matured people because I don't believe we have a 10 year old child here.
I have been personally blocked 2 times for posting keys here because it's not allowed, we all know that. I also said that the keys will be everywhere very soon, that is fact. But don't forget that the biggest problem is the bloggers but they haven't got it to share at the moment. If we had circulated the keys openly here, they would've got it from us and publish and the provider will take action.
It's obvious it won't last forever but our actions can make it last longer. I have no problems with sharing Keys, infact after taking it down, I shared to emails and WhatsApp for 2 days, I couldn't even work in my office. It was intense, I decided to take a break and others who got it from me to help those in need.
It has to be the way to go here, we need to move on and act better, it's for everybody's benefit and nobody should feel as the most hated.
I appeal to those who have it to try and accommodate others via email. And please if you get it don't post in any open forum or social media.
At the moment the keys are still not open because we have acted well so far, I have to thanks those who got it earlier for their professional behaviour. Let all of us do the same, it's only for our greater good. Thanks.

ludakristos:
Please Boss can you answer my questions: Can 1.8mtr dish track 18w in Southern Nigeria?

Chinedu7:
Yes with good quality.

zoboizee:
HOW TO ENABLE PATCH MENU IN INSTALLATION OF SOME TIGER RECEIVER.

FIRST PRESS THE F1 BUTTON ON REMOTE THEN PRESS QUICKLY 3 TIMES 000.
Hot key combination shortcuts
F1 + 000: Emulator on/off
F1 + 111: Activate network
F1 + 222: Ident list with manual binding to channels
F1 + 333: Manual input constant CW
F1 + 444: Manual entry key
F1 + 147: Editing keys
F1 + 555: IP Settings
F1 + 666: Server Configuration (Lan)
F1 + 777: Auto IP address.
F1 + 999: Setting your motor

Spacetrotter:
[color=#006600][/color]I have tried all these codes on Tiger T100 but none of them worked. I used 9878 to bring out the patch but only PowerVu channels are autorolling; biss channels could not open and the software OTA upgrade refused to connect. Those using T100 please help me on how to fix this Biss and auto or manual upgrade