proclinician:
Hi peeps I own a Lexus es 300. Today I noticed that both the ABS and the BRAKE light are on. I checked the user manual and it says driving it at that condition is dangerous. The car moves and stops perfectly as usual and I have just traveled and returned from Benin to owerri with it and I just saw this lights today. What do I need to do so it can go off?

Regex:


Check this mate.

https://itstillruns.com/reset-antilock-brake-light-5031944.html

oluwaleokey:
Hey senior men
I just discovered i need to change my gear oil. I have never changed the gear oil ever since i bought the car although the gear still selects perfectly well

Please which of the gear oil can you recommend for a 2004 toyota camry (big daddy).
Are there essential things i need change maybe oil or car components
I have only been changing engine oil n oil filter
Will appreciate your input

mimicue:
Hi all

After washing my Toyota Matrix engine , the check engine light came on
Though car drives perfectly. It’s just the stable check engine light . Please who knows what I can do

proclinician:


Thanks so much. Very straight to the point.

double3:

First step is to scan ur ECU for error code. Why do people still wash there engine BTW....
Cleaning with rag and solvent it the way to go, resist the urge to steam wash ur engine.

GAZZUZZ:
It's been a while I commented here.


Let me go back as far as I can with the limited time available.






There are lots of issues that can cause a no start condition . 1 faulty coil pack in a corolla cause a no start condition or limp mode. You can easily check fuel pressure and Run a scan to eliminate all other issues.




BCM fault. (Body control module) very common in civic.





Sparkplugs in an engine as basic as yours should not ba able to burn out, unless they are fake. Try using Tokumbor spark plugs (yes I said it. the way the dollar is now, it's more cost effective)



Simple scan will determine what wheel speed sensors are at fault.





Might be a misfire, take out the battery terminal, and clean out the ignition coils if wet.





This is delicate. Start with confirming if the shift cable is aligned properly, next confirm if you have the right amount of transmission oil, next try entering reverse without the transmission ecu connected. Give me feedback after all this.

adesanyadotun:
Hello brilliants, my car Camry 2011 occasionally becomes sluggish when I engage the gear. Happened twice in the last 3 days. One at R and one at D. I had to rev higher than normal before it will just move. After shifting back at P and reengaging, it worked fine.
What should I be worry about.

donuba61:
Good day all. My Honda civic 2008 is giving me serious issue. The battery sign on dashboard is showing when d car is running, the rewire here check n said that my alternator is bad. He bought another alternator for me but the battery sign is still showing and he said I should drive the car for sometime that the alternator will charge d battery. I drove it to work day on Friday a distance of 16km n d battery sign is still showing .it will always appear n disappear. I have to scan the car and it should P2185 code. Yesterday, the sign stop disappearing, it just stay stable, later in d evening that car stopped on motion, I have to use a friend battery to drive it home. The rewire is now saying that the brain box is faulty that why it kills alternator. I disagreed with him because I scanned the car n nothing of such appeared. Pls car gurus here, how do I fix the problem? Here is a pix of the scan result.
Tel ur rewire to check the alternator replay or socket that is the culprit
Cc Gazzuzu

GAZZUZZ:


You should never hear a his. Worst case are short pulses.


Stop self diagnosis and find a tech who understands the principles of how modern day vehicles work.

Gallass:


I did this. He fixed the problem 100% but refused to tell me what he did and what the problem was

Well he's not a preacher of love

GAZZUZZ:


Well he's not a preacher of love

seanfer:


Boss Toyota Camry 06. Making grinding noise when applying breaks. I’ve been ignoring it for sometime but it’s now so loud. What could be the cause.

GAZZUZZ:


Braking material worn out. Take out all 4 wheels, inspect and replace worn out parts

Toyosienna:



Sir ,my car slightly jerk sometimes while driving ,possible cause. Sir

GAZZUZZ:


The MB CIS jetrtonic system needs servicing .

GAZZUZZ:


Braking material worn out. Take out all 4 wheels, inspect and replace worn out parts

Toyosienna:



Thank you sir

seanfer:

Cc Mrford. This is our next project when I come to the workshop.

Mrford:

I'm always ready sir.

Toyosienna:



Thank you sir

GAZZUZZ:


Come back Jo.

Does this look like your vehicle type?

Kindly state your vehicle model and engine spec