₦airaland Forum

mayor2013:
Get a competent person to have that car checked for you. You can't have up to 10 ECU fixed and still be on the same page, that's my concern

Sir the car is working well, befor the ECU stolen. We got a almost ecu and it started. Guys are working on it

mayor2013:
What went wrong with the one you told me you got? Are you sure there are no other issues asides just looking for ECU?

Good morning Bro, thanks for your help yesterday. The one u brought was not for my car. I need exactly 5speed ecm. The one the guy brought wasn't for my car. V1, XB MEC 33-(025) A1 very important sir

Hi gurus, I need the ecm for quest 2004 5speed
V1 MEC33-022 A1
XB MEC33-025 A1

Or any code that belong to 5speed.

I will appreciate any contact. Thanks

Hi gurus, I still need the ecm for quest 2004 5speed
V1 MEC33-022 A1
XB MEC33-025 A1

Or any code that belong to 5speed.

I will appreciate any contact. Thanks

Nissan maxima, can't it fly for 1.3m used 3.5L 2008

Good evening guys, pls I urgently need to replace my ecu. After lots of consultation I got the correct ecm number that will match my car (quest 2004) all thanks to Costee.

The model of the ECU needed Are V1 MEC33-022 A1
XB MEC33-025 A1

If you have or know anyone that has any of this should pls mention my moniker.

Nispart GAZZUZZ Costee diportivo honmusa MykelOdus nurey Mayor2013 cocoduck and all

Sure it's Bro, we are making progress.

ZIMDRILL:
When you buy a replacement ECU

1 the ECU should be from the same extact car as yours eg engine size and year etc

2 you buy the ECU and the key itself, otherswise you will either throw away the ecu you just bought or go to a proper key program who will program the ECU to your old key.

3 make sure you have knowledge of your immobiliser in your car eg some audis and bmw you cant just buy and ecu the and they key, audi you need buy the full kit i.e ECU, key and the instrument cluster there are all programmed to work as unit if you only buy the ECU and key the car will never start no matter what, then bmw you buy the key,main ECU & security reader ECU

So in your case most likely you needed the ECU and key or else get your old get programmed to ECU you bought but the ECU has to be from a car with is exact as yours model, Engine size and yours

Depending on the knowledge of your mechanic and auto electrian (rewire) you might spend lots of money in wild goose chase

Thanks for this, appreciate...

Wil feed the house on result of my journey later today

Costee:
This should also match: V1 MEC33-022 A1

Thank you and God bless you sir.

This forum will also sever a reference to other in future I presume

May God heal all wounds

biggiyke:
Just curious. Is your car at a mechanic in Shasha, Lagos?

No bro

ironheart:
Do people drive nissan Quest? The only one i have seen apeared over night n i heard the engine knocked in transit. Some days later it disappeared again. Bros dont you think you should change your brand? Only one guru here talks about Nissan n he is one hell of a clown i love reading his comments.

Hmmmmm Nissan quest is a nice car tho problematic kind of but if you know ow to maintain rides, u wil use it for years without fault

Costee:
Well you just might be lucky after further search. For some reason, the ecm for your model appears scarce. The thief that stole yours was not a "mumu" after all; there was actually a demand for it.

Thanks Bro, I appreciate your input Bro. God bless you I will feed you on my search by monday

diportivo:
Ur car has started isn't it

What's with u envisaging future wahala

1 new wiring harness

2 new ecu

3 new transmission

4 new engine

5 new car

Happy now?

Oga mi why now... Lemme joooo ur boy car dey sick seriously. I need all the possible assistance in time like this

Costee:
Your vehicle was manufactured in March 2004 [5-speed transmission] with green exterior and beige interior colours. The required part number for your ecm is 23710-CK011. Your stolen ecm has something like this :XB MEC33-025 A1 43xx. The ecm your earlier installed [E2 MEC63-020 B1 4908] was for a 2005 model manufactured on 8 September 2004. There's a chance that the "2003" ecm (how did you determine that?) that you have now will work for your vehicle if the ecm was produced anytime from May 2003.
What do you mean by programming the vin to the ecu? There's nothing like that. What can be done is to write the vin to the ecm, and that feature is only obtainable from 2005 models. Your key was programmed to the ecm, both of them jelled, and your vehicle ignition fired. C'est fini.

This Graham! U hit on the center nail sir. The 2003 quest ecm opens the front nozzle, but fail to open the rest. The car eventually start after getting a tokunbo crank sensor(6k for those who is buying in future). But upon working further to see what actually happens with the other nozzle, the car refused to start. Halas! The vehicle back to square one (started showing need for program). The ECU didn't work with it.

I will search for ecu with the above number, but is it possible to get this in Nigeria at all?

mayor2013:
U1000. CAN communication circuit malfunction. Answer these questions

Firstly did the scan tool communicate with the ecu?
Secondly have you checked ecu relay?
Do you have the NATs (nissan anti theft security) light on or off?
Has the ecu been programmed to match the VIN of your car?
As long as you have the U1000 fault error that car would nefver start

I just hope you have the right ecu in it

I have programmed the vin with ecu (tho I bought new 03 ecu and luckily it give shocks and injector opens as well.

Pls is there any future damage I should be expecting and wich precautionary caution should I adapt. Thanks

honmusa:
please stop calling crankshaft position sensor flywheel sensor .it too razz !!!

Thanks for the correction, appreciate

GAZZUZZ:
If you drove the car, and shut off the engine, then you had no business touching the "flywheel sensor" put the old one back and try again.



P.s which mumu thief steals the engine ecu of a nissan? Dem no see ya battery theif?

The old one was stolen.

mayor2013:
U1000. CAN communication circuit malfunction. Answer these questions

Firstly did the scan tool communicate with the ecu?
Secondly have you checked ecu relay?
Do you have the NATs (nissan anti theft security) light on or off?
Has the ecu been programmed to match the VIN of your car?
As long as you have the U1000 fault error that car would nefver start

I just hope you have the right ecu in it

The ECU wasn't programmed With vin but the key was programmed with the ECU and it accepted it. Which remove the key signal on the dashboard.

I will rescan again to confirm the u1000

MykelOdus:
. Since the ECU was stolen, you might find it hard to get the right ECU as you do not have a sample or the part number! Let me have the ECU number of the one you got, and your VIN I can tell if it should fit your car or not.

The vin number is 5N1BV28U74N354034

Brain box number IS E2 MEC-020-B1 4908

MykelOdus:
. Since the ECU was stolen, you might find it hard to get the right ECU as you do not have a sample or the part number! Let me have the ECU number of the one you got, and your VIN I can tell if it should fit your car or not.

I will provide the VIN number and the part number of the one available wen I get to the mechanic workshop this morning. Thanks for your help so far appreciate

MykelOdus:
. Have the key light gone off? If yes, have you scanned the car to know what the problem is? Let's know the DTC ---- the code you get from the scan, that will help us better.

Thank you sir.
The code gotten was u1000
Then coolant temperature... Will look for the print out codes.
Yes the key light has gone off, but it won't bring out current(shocks) nor the injector opening

sooperrescue:
My car, is that a name or a brand? Full details of your car and how the code came about?

Thanks for your response..

The car in question is 2004 Quest.
The brain box was stolen, so I bought another one and it was showing car with key in it so we need to program it. Tho the code has been read. The car has refuse to start. After scanning, we discover the flywheel sensor beneath engine is damaged.after replacement
The Still engine didn't start, there was no single shock and the nozzle refused to open also.

Could this be a bad brain box or the flywheel sensor.
Pls help a brother,
Sienna erico2k2 mayor GAZZUZZ

Good evening gurus.my car. Enter code so I need help to read the code generated D15A6. Will appreciate any help. Thanks

Good evening guys, i need good condition space bus..
Preferably Toyota sienna
Budget is 400k

If you have any drop pics and conditions.
08136473564

Am. Ready to pick up tommorow evening

380k cash

Wow, if ths happens eventually. My dream shall come to pass

mrsage:
The dynamics of the business has changed over time. We now have more people in the business so you have to think out of the box to grab a share of the market.

I suggest you go ahead to market your service online. Do this effectively and watch the results over time.

Thank you for your priceless input sir. We have put in some efforts. And this prove how far the industry has been thrown off. The fuel price is another negative factor.

I still seek further advice to make rough /drastic decision

buchilino:
U DID 140 WITH A V6 ENGINE?, OL BOY GO TANK GOD SAY U STILL DEY ALIVE. I DID 100 WITH A V6 N AM STILL REGRETTING IT.

Ur horsepower might be higher than mine. Like I said I won't ever dare it again cuz to bring the vehicle to halt require some distance space

Now we know..... The earlier we all challenge corruption collectively, the better for us /our children. Wheter due process or bad way, what is bad is bad... Lets say no to corruption

This party won't last