₦airaland Forum

flamesbaba:
Bros thanks it works for my strongest STG 9800A I have enable the pitch

agaj4life:
Thank you Sir, With this information i can now enable/disable patch Menu on my Decoder.

graphicicon:
pls I need assistance on this, sometimes strongest decoder don't use to respond to biss key assess botton, in some some strongest decoder when I press green botton biss key menu will pop up, but some it will not respond, is there any botton to enable it

ManirBK:
Pls where to locate keys menu on tiger t100 combo? abohwun

graphicicon:
i have done that with the press of 8899 + << botton and it worked like magic, thanks a lot

RasKush:
@graphicion,Evening. From my research it's possible that iCONe B22 Combo HD is based on Chipset Montage cs6001. Could you try the following EMU\ Biss Key protocol access code. On the RCU:

1. Press 8899 + >> [Next Button] OR
2. Press 8899 + << [Before Button] OR
3. Press 8899 + > [Play Button]

Kindly post feed-back.

graphicicon:
Pls does anyone know how to biss key on icone combo b22, I have installed latest software no way to review the biss menu

RasKush:
iCONE HD satellite receivers maybe one of those viable decoders hiding right under our noses. iCONE i-970HD/ 990HD/ T10+HD/ T20+HD also auto roll with latest software dated 22/01/2018.
Other models include i-B33 COMBO HD/ T30+HD/ T32HD/ auto roll with software dated 27/12/2017.

Abuwaleed:
can it auto roll biss key and what type of Wi-Fi usb stick you use to connect the decoder with internet because I have one but slink WiFi stick not working with it

Folbim:
pls I need Midland decoder

jkawa:
Kindly I need software to update my digicom 9090:-
HW MODEL HT1081
HW VERSION 6001-01(A)
SW MODEL CT6001 COMBO
SW VERSION-V4.41

Kindly help.

Sociology55:
pls which site to download the software

Kamaye:
I use icone i980 HD its software is always readily available whenever the need arises, in fact they have a dedicated website for software downloads.

muyis4real:
Please house I need the latest software for digicom for sp24HD.

blackz:
Pls can this software work for 3D Lazer 9950HD

Moravia:
Pls post the link for the Digicom and Viewsat Sport24 latest software?

Dlee1:
Hello davodguy,
I would like you to do me a favour but I don't know how your schedule is at UAE presently. I would have like to get 4 ways stargold lnbf. The one from UAE is better than the one from aliexpress (China) and cheaper.

davodguy:
As a stranger, not sure where they sell this specifically. Can you check only for a specific shop?Deira is purely clothes, Gold, shoes and phones

Asenjeff:
those using c band KFS 51.5e 3900 h 13630. From 1.8m dish above

HIGHESTPOPORI:
Please I need the bid key for kfs Zambia,kfs Cameron,kfs Kenya and kfs Nigeria at Belintersat 51.5E. C band

drandonzero:
Digisat Ts 8080 software for Sport24 is out,

RasKush:
The precise procedure is as follows:
On your RCU press MENU >>>SYSTEM SETTINGS >>IP SETTINGS

Under Network IP Settings, press LINK TYPE >>>CABLE [WiFi] >>IP SITUATION >TYPE >Select Either Static\ DCHP

In my own view selecting either Static\ DHCP will not reduce or stop the freezing, its a matter of software adaptability. Audio & Video in the current software upgrade running in GSKy v.6HD is well synchronised and without minor hitches.

I have a Strong srt4950h and i applied the above changes but there was no definite effect. Fortunately my signal is @60%-65% and its what helps.

ganex:
Dish size

graphicicon:
@abourteng am still waiting for your response concerning the issue of setting my strong 4950H to STATIC OR DHCP, I want to try that procedure and see how it goes, pls with Clare explanation

arbourboateng:
sorry for not answering you earlier
1.Press menu on your rcu
2.Go to system setting
3.choose IPTV setting_then
4.highlight IP situation press OK you will see DCHP
5.use the volumes key to move to STATIC press exist to saved it.
Good luck and sorry for delayed.