Science/Technology › Re: How To Create A Locally Made Inverter With Ease by remi2good: 1:29pm On Feb 19, 2021 |
Yemmyteespeed007: All these marketers get problem o. Chai. seems they're intentionally calling ceejays bluff, I don't get the part of the simply English create your own thread and post links of your million million deals and advisements here instead of derailing this particular thread with their over long advertisements, they're defeating the aim of this thread and trying to bore it. |
Science/Technology › Re: How To Create A Locally Made Inverter With Ease by remi2good: 9:32am On Feb 05, 2021 |
ameh99: Please I need 500w mini car inverter or 12v Ups
Contact me you have for sell
09068448005 I have 650 12v ups |
Science/Technology › Re: How To Create A Locally Made Inverter With Ease by remi2good: 7:46pm On Feb 03, 2021 |
odimbannamdi: Jesus! GBM wey show me shege in 2018!
How do I check exactly? I just did a brief check now, but my inverter is sitting on top of the battery, and it is in use. Where exactly do i check lol my first new battery back then was GBM, I bought it brand new and if I charge for just 30 mins the inverter will stop and indicate battery full, after same 30 mins of use during power outage the inverter will be beeping battery low, I thought the inverter wasn't charging the battery optimally and I bought one chunky external analogue charger at a very high price because back then intelligent smart chargers were not easy to come by, finally I had to sell my brand new battery off as scrap @N10.000, since if I see GB I'll run before even seeing the M |
Science/Technology › Re: How To Create A Locally Made Inverter With Ease by remi2good: 10:49pm On Jan 29, 2021 |
saint2ace: This advert don start again...... Hmmmm some folks just don't know when to draw the line. |
Science/Technology › Re: How To Create A Locally Made Inverter With Ease by remi2good: 3:55pm On Jan 01, 2021 |
wilmaria14: I am still trying to bring in dis battery and when I do it will be cheap for all d family here so dat we all can enjoy good product waiting for your update on it sir |
Science/Technology › Re: How To Create A Locally Made Inverter With Ease by remi2good: 10:01pm On Dec 20, 2020 |
dollarnaira: In fact what is good for one person is bad for another based on usage and results. I use suoer with all gladness bc it is drains little power. Fine ,both famicare and suoer are both modified sine wave but in reality suoer works for my tv, lightings, woofer ( without humming sound). Humming sound even reduced drastically (with coloured bulbs) when someone here said souer inverters hate loose connection which was right afterwards bc I tested and confirmed it. I used famicare 1kva for few weeks and I see no difference in both.
In terms of size
Most inverters in terms of size are not complete. Buy any oil of say 5L, measure it and u wud discovered that it will not be exactly 5L. Same goes to most things with "sizes" e.g a 1kva(1000w) inverter may probably be 700w while a 2kva(2000w) may likely be 1700w(i.e 1.7kva).
Back to the burnt part
Probably you overloaded your inverter thinking it was a true 1kva or 2kva. I v a permanent saying that, "never load ur inverter above half its capacity".
Note dat modified sine wave is not good for coil based appliances e.g fans, blenders, microwave,oven etc
Lastly •Tell us what u were using before your inverter got burnt.
•Does ur burnt inverter charges?
• Do u at times use ur inverter while charging it?
Whether psw or msw it is not a full alternative to phcn so we all should pamper our inverters like egg dont plug everything with plug in dem you're my partner in usage � I've been using that suoer for close to three years now without issues and I was the one that told you to make sure all plugin are firm and you won't have any issues, you've really done some research and you've said it all, I might even add that these latest souer MSW are a bit refined than mercury because they might pass for PSW and doesn't hum unless in cases where the connection is loose, I've used my own for almost all my gadgets including my led TV, thou my fan is not coil, I've even thrown my bedside fridge ounce in a while, initially when I bought the inverter I intended using it as an intermediary, to stand in while I see money to buy PSW, like play like play I found out it wasn't that bad and like play like three years don waka and I'm still using it |
Science/Technology › Re: How To Create A Locally Made Inverter With Ease by remi2good: 9:53pm On Dec 16, 2020 |
odimbannamdi: Boss, any update? final conclusion on test after charging and repair=there's improvement in my ailing battery and ainjin pulse repair worked on my battery. I wished I also repaired instead ruining my rechargeable fan battery |
Science/Technology › Re: How To Create A Locally Made Inverter With Ease by remi2good: 4:45pm On Dec 16, 2020 |
saint2ace: Like I always say, the longevity of batteries is based on an understanding of the charging algorithm. If u follow manufacturers specifications u rarely go wrong.
Your battery can bulk charge to 15v and float at 13.8v if u had used the manual setting on the Anjing while charging, then u were charging at more than 16.4v, which of sustained with definitely destroy a cell in ur battery, the more reason it is written in the manual that the manual function should not be used without supervision.
Secondly, if ur battery already had a bad ( u can identify this when ur battery heats up astronomically when charging) then the pulse charger will only make it worse, as it will continue to pump in current to the battery while try to reduce resistance. So In The long run, u'll just get an even bigger problem than u started with.
Lastly, allow the battery to cool down for some hours and use ur rechargeable fan to charge it as normal (slow charge) u might be lucky to get it back the way it was.
We all learn everyday and like I always tell me DIY friends, every mistake is a learning curve.
Cheers.... eleojo2 is correct the charging current was too high and that was my bad because the knob was all the high where I preset it when I was charging the other big batteries and it didn't cross my mind to tune it down for this small batt, so the house should learn from my mistake and have it at the back of their mind. Secondly due to the swollen state of the battery it wouldn't fit in the space compartment of the fan anymore so I'm stuck. |
Science/Technology › Re: How To Create A Locally Made Inverter With Ease by remi2good: 3:29pm On Dec 16, 2020 |
I tried charging my rechargeable fan battery with the pulse repair because it doesn't last long again, I just can't explain what really happened, maybe it was the charging amp because the knob was all the way when I was using it to charge the other inverter battery, and funny enough I was there and perceiving the odour small small not until a friend came and complained of the strong toxic smell, I started investigation and found out, and the battery was manageable but now I've completely ruined it
|
Science/Technology › Re: How To Create A Locally Made Inverter With Ease by remi2good: 1:24pm On Dec 16, 2020 |
dollarnaira: Nothing is best than connecting to an inverter plus a specified load at a particular time.After which you monitor with a multimeter or display of the inverter to see how fast or slow the voltage drops at the said load.
Batteries, like I always say, na black market.
Nothing beats a new branded battery when u v the cash. you've said it all, this their battery tester thingy disappoints, there's nothing better than load testing a used batt, some sincere sellers who value their integrity load tests before selling to customers some use series of 100w former power consuming bulbs in lamp holder to acertain if the batt can hold charge. I've bought used battery from someone here on nairaland which tuned out to be almost useless and when I notified him he started speaking big English and didn't wanna take it back and it took the intervention of well meaning people to settle the issue |
Science/Technology › Re: How To Create A Locally Made Inverter With Ease by remi2good: 7:10pm On Dec 15, 2020 |
odimbannamdi: There really are kind-hearted folks here, and Saint2ace is one of them.
After my above quoted lamentation, I approached Saint2ace about my need to get at least one of these chargers before weekend, and how worried that Jumia may disappoint me.
Without even asking, the baba just offered to give me one of his to use, pending when Jumia delivers mine. We met at Yaba yesterday and I picked it up.
He even gave me a free voltage display for my battery.
Thanks Saint2ace! More blessings! I believe he's the one that dashed out new battery to ceejays 80 in the earlier years of this thread and he's still helping out, that's one of the aims of this thread, more kudos to you @saintface, keep on keeping on. |
Science/Technology › Re: How To Create A Locally Made Inverter With Ease by remi2good: 5:32pm On Dec 15, 2020 |
saint2ace: We await your review.... I learnt something between yesterday and today, I observed that the charger is indeed intelligent and dictects ailing batteries and and switches to desulphation mode and after charging full and I think that's when the repair takes place, like I said earlier I have two ritar 150ah batteries, same make bought same day, I use one at home and the other one in the office, the one at home is failing recently maybe due to under charging because our light at home is too epileptic and I had to rely on my panels for charge and during during this raining season some days was little or no charge. The second one at my office is still top notch maybe because of constant charge because we do have constant light in that area and funny enough this one is always abused because I'm using it for commercial and it's always on from 8:30am till 8 or 9 pm six days a week. My observation was that the good battery doesn't enter desulphation mode after full charge, but the bad one enters desulphation mode after full charge in the right hand indicator while the left indicator will start counting 0.8ah @14.7v, I tested with my car battery which is not top notch and it entered desulphation mode after full charge. So today I decided to carry the batt to my office and charge the battery till it exited desulphation mode because I think that's when the repair takes place, and I've achieved that today because the indicator is reading full charge at 0.0 thou it took up to eight hours on a batt that almost full already. I'll update the house if there's significant improvement when I load test this night. |
Science/Technology › Re: How To Create A Locally Made Inverter With Ease by remi2good: 4:44pm On Dec 15, 2020 |
ceejay80s: saint2ace please i need clarifications from u and all those using this yellow type....
is the 24v charge 10 or 15amp? i know the 12v is 20amp they indicated 12v @20amp but I doubt if it's up to 20amp because it took up to six hours to charge my 150ah from 80% to 100%. My other intelligent charger would have done that in less than two hours, |
Science/Technology › Re: How To Create A Locally Made Inverter With Ease by remi2good: 10:39am On Dec 14, 2020 |
ceejay80s: una finally don buy this model finish from jumia....na expensive ones full there, this yellow colored type was around 6-7k before, now i want to buy this model, i dey see 17k lol, I've not bought another one yet o the price has gone up and shipping fees dey five much now, I had to borrow from the friend I sold off my own to |
Science/Technology › Re: How To Create A Locally Made Inverter With Ease by remi2good: 9:26pm On Dec 13, 2020 |
Finally charged fully with the pulse repair charger and in desulphurization mode, I'll load test tomorrow and acertain if there's improvement in my ailing battery and update the house if there's improved run time.
|
Science/Technology › Re: How To Create A Locally Made Inverter With Ease by remi2good: 2:09pm On Dec 09, 2020 |
Logged on to jumia to order the yellow pulse repair charger and realized that the prize has doubled overnight. And I've sold off my own |
Science/Technology › Re: How To Create A Locally Made Inverter With Ease by remi2good: 11:30pm On Dec 07, 2020 |
mahkanjuh: Yes boss, thanks much, they r lifepo4, was just lucky to get the 3. But, I think each of them has a separate BMS, that's y I even bring it up, each is 12v 40ah. So as to be enlightened the best way to connect them to get 12v 120ah and also get them charged from Solar panels you really need someone knowledgeable to guide you physically, those batteries are different from your normal batteries, if you were using only one then the stress wouldn't have been much but since you'll be connecting three in parallel you gast to be careful because the battery composition and charging system is different and sensitive, and mistake could be disastrous. With the right connections you really gon enjoy them batteries. if you chance upon the batteries again quote, I'm really in need of them. |
Science/Technology › Re: How To Create A Locally Made Inverter With Ease by remi2good: 7:30am On Dec 07, 2020*. Modified: 7:46am On Dec 07, 2020 |
mahkanjuh: Good evening fam, please how can I connect this type of battery (picture attached), to give 120ah, because I have 3 of it, each of it is 40ah? Pls, help a brother, wanna be charging them with solar panel that is life po4 batteries right? Very rugged with long life span and also very delicate I'll advise you get somebody knowledge to help you in the connection, please how did you source them and is it still available?
|
Science/Technology › Re: How To Create A Locally Made Inverter With Ease by remi2good: 9:22pm On Nov 28, 2020 |
wilmaria14: 17k sorry it is 56 no 60 please sir do you know the power wattage? |
Science/Technology › Re: How To Create A Locally Made Inverter With Ease by remi2good: 8:42pm On Nov 27, 2020 |
ceejay80s: Some of u might not like this but sain2ace is right , I created this thread not for sales or advertising purpose but to teach how to setup inverter with low budget, if I wanted to pace ads here and make money I can but I instead teach u how u do it urself ,there are lots of thing I Dont know my self and I learn from others here too, if I wanted to import the pulse charger and advertise here,I can but I chose to tell u guys where to get it, even when I sold my 20amp and 30amp smart charger, I opened a new thread for it , u guys derailed the thread and its the truth, I wonder how u will feel if u open ur own thread for ads and somebody comes in to sell same stuff, how would u feel? @wilmaria14 I get it now , u have made a name and trust ,could u kindly open ur own thread so that peace can reign, I beg u...and its free on Nairaland. If a question is asked, before u see a reply , u will see many adverts,the main purpose is not sales but if u have something a member needs , u are free to sell to the person but posting too many ads derails the thread, Thank u all most people don't know that this your thread was and is for poor and hustling men to create inverter locally and with cheap means, since you're very lucky and a lot is ridding on your back you can as well create another thread for sellers and all thousands thousands deals should be directed to that since ceejays is now a household name in solar energy � |
Science/Technology › Re: How To Create A Locally Made Inverter With Ease by remi2good: 8:19pm On Nov 27, 2020 |
zekepio: @wilmaria14 built a very trusted brand in just a matter of weeks and everyone that has done business with him attests to the quality and credibility of his service and goods. He rarely post adverts (maybe twice a week?) I don't see that as a problem. If you want him to create a thread for his business and stop posting here that'd be denying many people the reliability and credibility of wilmaria14. How many people will know about his thread? If he sticks to his 2 adverts a week I think that shouldn't bother you or anyone except you're a hater!
PS: @wilmaria14 I also think you should create a thread but only to catalog your goods and reviews and yeah you should stick to posting your adverts here!!! you made some valid points but the sentence " except you're a hater" is uncalled for because saintface said stop littering and not stop posting, and if you're a long time member of these thread you'll admit this is not the first time calling out an individual for over advert, @ilmaria you're doing a good work both in trust and good customer relations keep it up but limit your adverts because the pioneer creator of the thread has some objectives for the thread. |
|
Science/Technology › Re: How To Create A Locally Made Inverter With Ease by remi2good: 4:33pm On Nov 23, 2020 |
ceejay80s: saw it on jumia for 1000+ but before i checkout e turn to 7k , e on finish, price changed to 3k+ and after checking out e fit turn to 12k I mean the 56" inches big sized blade, if you saw that type for 12k, it's a steal at that price, kindly share the link. |
Science/Technology › Re: How To Create A Locally Made Inverter With Ease by remi2good: 9:29am On Nov 23, 2020 |
wilmaria14: thanks boss for the deal n me happy pass God bless u for picking @wilmaria for the deal God bless narialand and ceejey do you have DC ceiling fan 56in. |
Science/Technology › Re: How To Create A Locally Made Inverter With Ease by remi2good: 9:56pm On Nov 22, 2020 |
dollarnaira: Something good had already occurred in ur battery at this stage. I hope so o because economy red wella now and I should be talking of upgrading my battery bank instead of changing. |
Science/Technology › Re: How To Create A Locally Made Inverter With Ease by remi2good: 9:46pm On Nov 22, 2020 |
dollarnaira: Something good had already occurred in ur battery at this stage. bro I just hope so, I have two of the same batteries, same make, same state, I use one in my shop and one at home, the one in the shop is still kicking strong while the one I use at home ain't giving enough run time lately, feel the reason is because the one in the shop is always fully charged because we normally have constant light unless ounce in a while and then my solar panels will compensate till light is restored, but at home light is always an issue and not steady so I magorly depend on my panels and it's like the panels don't always push the batt to the zenith thereby leading to desulphation, because I have only two 130w which is =260w to charge 150ah batt |
Science/Technology › Re: How To Create A Locally Made Inverter With Ease by remi2good: 4:07pm On Nov 22, 2020 |
ceejay80s: How far , ur pulse repair charger sir after the last update wey I charge up to 2.1a. NEPA took light and I still dey find NEPA till now, so I don't think it has gotten to repair stage. |
Science/Technology › Re: How To Create A Locally Made Inverter With Ease by remi2good: 12:42pm On Nov 22, 2020 |
lateefykn84: thanks boss i really appreciate, i received message from jumia this morning....
Item/s in your order #$$$#$$$$ has been shipped from overseas. It will be delivered to you within 1 to 2 weeks. all things being equal i.e there's no covid 19 lockdown and no endsars curfew you'll get your goods within two weeks. Next time when ordering check the expected delivery date so that you'll know if it's ok with you, the timeline is always there. |
Science/Technology › Re: How To Create A Locally Made Inverter With Ease by remi2good: 8:45am On Nov 21, 2020 |
lateefykn84: 6-12wks too far maybe i should cancel the order or better still if you have the app, open it and go to my orders, open that particular order you made, you'll see status and expected time of delivery and date timeline of you receiving it . |
Science/Technology › Re: How To Create A Locally Made Inverter With Ease by remi2good: 7:58am On Nov 21, 2020 |
The other indicator
|
Science/Technology › Re: How To Create A Locally Made Inverter With Ease by remi2good: 7:57am On Nov 21, 2020 |
Picture
|
Science/Technology › Re: How To Create A Locally Made Inverter With Ease by remi2good: 7:52am On Nov 21, 2020 |
Finally charged through the night for house because NEPA finally remembered me. 14.7v @2.1a the other indicator is displaying trickle or floating charging |