₦airaland Forum

Good work

Am alone you did a good job.

This is the best place to be.Nairaland for real.

A appreciation your doric base design at the entrance colume

Good work

The female hoste is a good one

I must confess,you are doing great,keep it up.

good work,keep it up

well done

looking at the staire well,the bonded block is not in the same level.Please correct your site engineer or foreman,so that they will not spoil your marvelouse project.

Please thorough inspection is needed to avoide double expenses,as they said prevention is better than cure.

I must confess,this is a good work
which softwares did you use for this,is it 3d max?

Good work,keep it up

Hi,
My name is I.k.
I am an Architectural Technology graduate.
I have strong skills in Autocad,Archicad,Artlantis,Revit,3d max and Microsoft Office project 2007 usage.
I am also a well trained project manager(PMI).
Send me a mail using sixtus4@gmail.com or
Call me on 08068544311 or 08180760569
for better employment offer,contract,or training.
Thanks.

Do you have access road for vehicle to the site?what is the nature of the soil?so much expenses on site clearing

Hi,
My name is I.k.
I am an Architectural Technology graduate.
I have strong skills in Autocad,Archicad,Artlantis,Revit,3d max and Microsoft Office project 2007 usage.
I am also a well trained project manager(PMI).
Send me a mail using sixtus4@gmail.com or
Call me on 08068544311 or 08180760569
for better employment offer,contract,or training.
Thanks.

Hi,
My name is I.k.
I am an Architectural Technology graduate.
I have strong skills in Autocad,Archicad,Artlantis,Revit,3d max and Microsoft Office project 2007 usage.
I am also a well trained project manager(PMI).
Send me a mail using sixtus4@gmail.com or
Call me on 08068544311 or 08180760569
for better employment offer,contract,or training.
Thanks.

Hi,
My name is I.k.
I am an Architectural Technology graduate.
I have strong skills in Autocad,Archicad,Artlantis,Revit,3d max and Microsoft Office project 2007 usage.
I am also a well trained project manager(PMI).
Send me a mail using sixtus4@gmail.com or
Call me on 08068544311 or 08180760569
for better employment offer,contract,or training.
Thanks.

Hi,
My name is I.k.
I am an Architectural Technology graduate.
I have strong skills in Autocad,Archicad,Artlantis,Revit,3d max and Microsoft Office project 2007 usage.
I am also a well trained project manager(PMI).
Send me a mail using sixtus4@gmail.com or
Call me on 08068544311 or 08180760569
for better employment offer,contract,or training.
Thanks.

Good Morning Sir/Ma
Please a friend of mine needs an urgent assistance,any body with useful information should reply.

I am searching for new job opportunites in the Oil and gas Industry as either an Instrument Engineer or a Rotating Equipment Engineer (preferrably the later).

I just completed my MSc in Design of Rotating Machines from Cranfield University September 2011 and I have a BEng in Electrical Engineering from University of Ilorin.

I also have about 3 years experience in Crestech Engineering Limited as an Instrumentation Engineer.

I'll be grateful if you can please assist me or refer me to any company or agent.

spyder please i want to know which part of the building,is this last picture showing?

Hi,
My name is I.k.
I am an Architectural Technology graduate.
I have strong skills in Autocad,Archicad,Artlantis,Revit,3d max and Microsoft Office project 2007 usage.
I am also a well trained project manager(PMI).
Send me a mail using sixtus4@gmail.com or
Call me on 08068544311 or 08180760569
for better employment offer,contract,or training.
Thanks.

Good day
Please a friend of mine needs an assistance,any body with useful information should please reply this mail.

I am searching for new job opportunites in the Oil and gas Industry as either an Instrument Engineer or a Rotating Equipment Engineer (preferrably the later).

I just completed my MSc in Design of Rotating Machines from Cranfield University September 2011 and I have a BEng in Electrical Engineering from University of Ilorin.

I also have about 3 years experience in Crestech Engineering Limited as an Instrumentation Engineer.

I'll be grateful if you can please assist me or refer me to any company or agent.

Hi,
My name is I.k.
I am an Architectural Technology graduate.
I have strong skills in Autocad,Archicad,Artlantis,Revit,3d max and Microsoft Office project 2007 usage.
I am also a well trained project manager(PMI).
Send me a mail using sixtus4@gmail.com or
Call me on 08068544311 or 08180760569
for better employment offer,contract,or training.
Thanks.

Thanks,a lot.

Spyder, you are doing great,could you please estimate total number of bags of cement,it consumed?

Good day,after taking a look at your samples of work,i must confess you are doing great.Please send me your contact no for more discussion

Good work,keep it up.I would like to have your address and number for more discussion.

Good day,i want to know,how you have gone with your project.Have you caste the dpc?

Autocad,archicad,artlantis,revit,3d Max Skills
« on: January 13, 2012, 02:05 PM »




--------------------------------------------------------------------------------














Hi,
My name is I.k.
I am an Architectural Technology graduate.
I have strong skills in Autocad,Archicad,Artlantis,Revit,3d max and Microsoft Office project 2007 usage.
I am also a well trained project manager(PMI).
Send me a mail using sixtus4@gmail.com or
Call me on 08068544311 or 08180760569
for better employment offer,contract,or training.
Thanks.

What is procedure for payment?

What is the procedure for payment?