₦airaland Forum

I suspect its a 3Bedroom. If it is, the average cost of that is between 3.5m - 6m depending on the level of luxury and grade of finishing materials. Don't forget to also factor the current inflation in the prices of building materials.

Your time is now. Make your request.

Nice 3D's.

Now, getting your dream home is as easy as stating it. See our ongoing site, now at paint finish stage.

Its time you got your own design.

Your dreams will come true.

Welcome to design land. What's on your mind?

hartland:
Evening plz I have a 50 by 100 plot and want to get a sketch for a three bed room flat with the following
* all rooms ensuite
* ante room
* laundry
* home office
* visitors toilet
* spacious living room n dinning
* porch n a kitchen with store

HARTDIEPREYE1@GMAIL.COM

Your sketch is lounging right about now in your mail. Please confirm.

batlanta:
Good evening, I hope you have not forgotten me sir........

Not at all sir. Taking time to give you the best.

skelefish:
I think he is trying to say engrs should address structural problems without trying to shift blame on architects...can u design a cantilever beam spanning more than 4.2m?

You caught my drift.

hartland:
Evening plz I have a 50 by 100 plot and want to get a sketch for a three bed room flat with the following
* all rooms ensuite
* ante room
* laundry
* home office
* visitors toilet
* spacious living room n dinning
* porch n a kitchen with store

HARTDIEPREYE1@GMAIL.COM

Good evening, you will hear from us soon. cheers.

Happy Sunday folks. Have a super splendid week ahead.

batlanta:
Thank you and I really appreciate your quick response. The land is 50 by 100 plot with space for 4 - 5 cars to the left hand side and at least 2 cars in front of building. I hope this helps.

Alright. we will commence work on it. Expect a mail soon. cheers

batlanta:
Please can you help me out with a drawing..... I have a 2 x 3 bedroom flats bungalow with Decking above that I want to convert to 4 x room & parlour self contain apartment downstairs and same upstairs. Currently, there are 2 stairs leading upstairs (one is a door entrance to the left and in the middle of the flats and the other is an external stairs on the right side of the building). email: atlhomeshop@gmail.com Much appreciated.

We will need the existing dimensions to be able to fit your request into same structure, except of course you want to pull the whole thing down for a new design. Even then, we will still need to know the plot dimensions.

Do you have the existing plan? If you do, please send via mail to stancydg@gmail.com or via Whatsapp to 07034643328.

meetgaya:
Tanx a lot n sorry for late reply

Cheers.

magarchi:
Good morning Sir. my dream is a 4 bedroom bungalow, all rooms en suite....with 2 sitting rooms and 1guest toilet...big kitchen and a small store....laundry room...there will be a gate house and car porch....land is 50*100.

magarchi@yahoo.com

Please check your mail. Your dream design is cooling off there at the moment.

Dilyschigo:
. Yes you are right but on what you said Spanning may not be the cause, i disagree with you on that. Sometimes architects design without considering the safety of the structures and is now the structural engineer that will call him to other. Also in the case of no column & long spanning, the Slab depth should be increased which may not have been done there so i will say that long spanning is still part of the cause.

This issue has been over flogged on NL already, referring to Architect/Engineer relations. Wouldn't want us to start a caper we can't finish. One thing is sure, we studied so we could proffer solutions. So, whatever it is that the Architect has designed, within professional standards, and is the wish of the client must receive required engineering solution from competent professionals, so long as the financing and technology is available. Not some flimsy structural excuse, because as said earlier, you were trained not just to come and repeat the norm.

magarchi:
Good morning Sir. my dream is a 4 bedroom bungalow, all rooms en suite....with 2 sitting rooms and 1guest toilet...big kitchen and a small store....laundry room...there will be a gate house and car porch....land is 50*100.

magarchi@yahoo.com

Your dream is undergoing the interpretation process. Will reach you via mail soon.

Better sack him now, than later.

We are here to help build your dream. Simply brief us.

K360Degree:
boss, can u help get a drawing for a 5 bed room duplex consisting of main parlor and ante parlor including the dining desk and a room below, the master bedroom should be big enough and have a spacious bathroom with walk-in closet. A swimming pool and 3 room upstairs. Please send it to my mail kunleanjorin@yahoo.com

Your brief has been architecturally interpreted. Please check your mail.

Alonu:
4 bedroom duplex with 2 parlours d master bedroom should be biiiigg and have a spacious bathroom with walk-in closet. A swimming pool and room and parlour boys quater. Devicemanagers@yahoo.com

Your dream has come alive. Please check your mail.

If he is sooooo annoying, then SACK HIM JOOR.

Dilyschigo:
What could be the cause of this building collapse? Happened in Enugu. For me i will say
* That loads were not properly distributed
* load too much on Foundation due to poor design
* The spanning was too long & need the introduction of columns so indeaquate columns
* poor quality materials were used & also the strength of the concrete mix used should be checked ( trying to cut costs)

I believe major factors would be ;

-Ratio and quality of concrete mix(most times, wrong mix ratios are used by so called experienced old hands, who probably learnt on other sites, without the academic background and applying same on a totally different site without considering prevailing factors. A few times they listen to professionals, the labourers pack sand alongside the granite, thereby diluting the mix unnecessarily.)

-Incorrect specifications of materials for structural members, such as iron rods. (Often times, wrong specifications are used even when quality materials are purchased) Span may not be a major issue if correct specifications are used. e.g if the architects design requires no distracting pillars, it will be the duty of the structural engineer to specify diameters that will work. Audacious projects such as winners chapel otta has proved this point.

- Inadequate curing time for concrete casts, such as columns, beams and the decking. (Most folks just continue building the next day after casting the decking, flimsy reason being that they want the walls to fuse properly with the floor)

Is this right? Engr please enlighten us more.

Dilyschigo:
. Depending on the area you want to construct the Drainage especially Drainage for highways, there is an office in charge of collecting data for the run off(flow) on that particular area which was done through a frequency analysis for a particular life time the Road can last like 25 yrs etc & the peak flow was determined from the frequency collection. So the designer can now go to the office in charge & collect the data for the area he is working on.

Oh I see. That's enlightening. Data for different locations may vary I guess?

Your dream home is real because, its in your mind. Getting it in real life, is a matter of stating it.

Your dream home is real because, its in your mind. Getting it is a matter of stating it.

Your dreams too can come real.

Are there standard dimensions for the estimated flow rates expected? Please educate us more.

Fire Him Now.

K360Degree:
boss, can u help get a drawing for a 5 bed room duplex consisting of main parlor and ante parlor including the dining desk and a room below, the master bedroom should be big enough and have a spacious bathroom with walk-in closet. A swimming pool and 3 room upstairs. Please send it to my mail kunleanjorin@yahoo.com

We are working out your dream design now, but please clarify where you want the swimming pool. We believe it should be within the compound? And do you have a survey plan? Please forward to 07034643328 via Whatsapp or to stancydg@gmail.com. Cheers.