In order for rice to be suitable for human consumption it must be processed in a number of ways. There are several rice milling machines that convert raw rice into the grain that is commonly seen in supermarkets around the world. What should we notice when RICE MILLING MACHINE is working? The follow five tips need we notice:
1. Fixing the machine frame on the plain ground and install on the frame the rice milling machine, grinding machine and power supply (electric motor or diesel engine). Next is the installation of belt pulley system. Before putting on the safety cover, please make sure that all the belt pulleys are in a same level and the belt position is just proper (not too tight, not too loose, normally when pressing the belt, the movement distance could be 2~2.5mm). When turning the belt pulleys, all of them should be flexible and without abnormal noise.
2. Open the rice milling machine cover to check if the milling roller and milling knives are all in well position.
Normally on entrance side the gap between milling roller and knife is 3mm while on the exit side the gap is 2.5mm.
3. Before exact processing works, please put the machine in empty running for 3~5 minutes to make sure the electric motor or diesel engine are working in good condition and in correct direction.
4. After starting, please slowly take off the block board on milling entrance to allow the processing
quantity increased step by step and to test the milled rice quality by adjusting the entrance pressure.
5. In case you need a terminal of the machine during the processing, please close the milling entrance first and wait till the milling finished before actual stop of the machine.
Operate RICE MILLING MACHINE in a correct way and make it work you for a long life, bringing you more benefits.

Hello sir. Any idea about the rough estimate of setting up a rice milling plant pls.

Still a very profitable business.
Seems rice farming has also started taking ground in the country.
Rice milling factory on the rise in Nigeria.

For managerial consultations,busness plan and set-up
contact 01-7910494,08164628081