pls add me 08105922178

07033336182. add me pls

M

Pls add me

add me pls big boss 09092371302

Am sorry ,Kinda busy . Ro where I stopped ,considering the infact that u have ur measurement and then whatever u constructing you follow ur measurement to draft ur pattern .
U start to draft by considering the shoulder measuremnet first and divide it by 2. The shoulder is 17 , and that will be 17/2=8.5 +1=9.5 .

Then use the 9.5" to form a squrae which will have four cardinal

An indicated point of shoulder,chest,armhole and the front of every individual ,where the neckline will be

Well u can use the opportunity to register wit us @ 9 bamako estate opp omole estate phase 2 ,hotel bus-stop ojodu lagos .
Call 08185127685 ,08027609353

Let go there my people , the square box indicate ur shoulder,chestline,armholelenght and front view of individual.and in within the square we slope the shoulder,extend the chestline and measure your neckline .

In within the box we do 3 major things 1.slope the shoulder by 1.5"" ,get the neckline of 2.5"by3" and curve out our armhole ,which will be show in the diagram for u

And u get ur armhole by extending ur chestlineb. And control. Ur extension line to get ur curve by 0.8 located at 45 degree outside the square

[quote][/quote]Check the diagram and follow the threads ,if u are interested take a seat and type 'am in'

Add me pls. 08079718444

Then the next thing to do is extend the chestline by doing the following calculation 40/4=10+1=11 to extend the chestline show in the pic above.

The next thing to do to complete the front patttern of ur tunic construction is taking the lenght from.the top edge of the neckline,straight to the desire lenght of whosoever u are seewing for and that will be according to the taking measurment. And add 2" hemming allowance to it ,and that's all

Pls add me, I jst saw dis, am interested, 08067498314

there is the pic of the front pattern of tunic

Here is the construction of the sleeves parttern of ur tunic top

Yes I need to explain the construction of sleeve pattern is by by using ur shoulder measurement to form a square. E.g. Let say u shoulder measurement is 18 /2=9, so u using 9" to form a square in which all side are equal.
Now please listen,the only area we need to add inches is at the armholelenght area of 2" and for every other line /area we don't need an add of any inches . And everyother measurment should be put in place according to the taking measurment

Tenx, u are doing a great job.

Let.say u have other measurement 10" shoetsleeve.and sleevescircumfrene 16,which will be divided by two.
16/2=8, and ur 8 will be measured on the sleeve circumrence.while ur 10" will be measured on the gator line which is the lenght of ur sleeve + 2" hemming allowance as described in the pix above

,thanks witthin the box we go in by 4" on the S.A sewing allowance line to allow to be to sew on the curve of ur tunic pattern .and above all on the armholelenght we go down 1.5"" to have a (s) ball down to where we have 4" to finally draft the sleeve pattern .thank u and God bless.

Hello class I hope u enjoy the tip of the tutorial so far. The next topic on the plan is the trouser pattern , pls be here on time and don't come late to the class ,asto avoid missing out ,thank u and God bless

Tenx

Tank u vry much for ur help, I have neve tried sewing a tunic bt tanx to dis thread I shld b able to mak one.

This is dollarbilzclo workshop and fashion academy @ 9 bamako estate opp omole estate phase 2 ,hotel bus-stop ojodu lagos .
Call. 08185127685 ,08027609353,08030462577
Dollarbillclo workshop and fashion academy a good atmosphere where u can and have a good practical concept in how to construct ur dress pattern ,u can also follow my link on online class thank u https://www.nairaland.com/2530630/let-learn-sewing

Hello good morning,am starting wit us this morning wit the construction of a tunic trouser. The pattern drafting has to do with the measurment taken from ur clients or whosoever u are sewing for . I will use my measurment as a good example for the class.
Now follow the measurement W-35,L-41,TH-25,kC-19,AC -16.

Nice job weldone. U can add me on your Watsap group 08131185245

Now to have it w-waist,L-lenght,TH-thigh,KC-kneel circumfrence,AC-ankle orcuff circumfrence.
For every trouser is made up of 4 pieces. The 2 front pattern and 2back pattern while the back pattern is bigger than the front pattern with 2" different but in the shape of the front pattern .
We start our pattern draft considering the infact that we have our measurment .we start with the waistline measurement ,now what we have have is the whole body trouser measurment , so we do our calculations to have a single measurement , while we will draft our pattern on .
The formular is waist is divided by 4 while every other measurement is divided by 2.

Then we follow this formulae to calculate the waist line measurment to have a single measurment by this step .the avtualwaistline +8/4+1.
The waist is 34"+8/4+1=11.5 is the answer, and that is wT u are using as ur single waist line measuremnet to draft ur pattern .

Then u use the 11.5 to form a box ,which I call a square theory method show here,and u can define a square to have all is side equal.