Hello

I will like to know the length of mesh wire fence needed to fence 40 plots of land, with each Plot measuring 100ft/100ft. This is a whole lot of land to fence so We need accurate measurement before it is started.
Any candid suggestion is greatly appreciated.
Thanks.

MAAF:
Hello

I will like to know the length of mesh wire fence needed to fence 40 plots of land, with each Plot measuring 100ft/100ft. This is a whole lot of land to fence so We need accurate measurement before it is started.
Any candid suggestion is greatly appreciated.
Thanks.

8,200 ft of fencing.

Thanks.

For how many hectares nko

I hav used mesh b4. For each plot u need approx 3.5 mesh. Which is 60ft each. So for 40 plots u need abt 3.5 x 40 equals 140mesh needed. D last time I bought d quoted mesh of 8ft height it was 20k (dat was 2013 b4 d rise of dollar) remember u will buy galvanized pipes.
U can contact me on 08131360160 for guide. Am on whatsapp so feel free to beep me

router123:
I hav used mesh b4. For each plot u need approx 3.5 mesh. Which is 60ft each. So for 40 plots u need abt 3.5 x 40 equals 140mesh needed. D last time I bought d quoted mesh of 8ft height it was 20k (dat was 2013 b4 d rise of dollar) remember u will buy galvanized pipes.
U can contact me on 08131360160 for guide. Am on whatsapp so feel free to beep me

Your whatsapp number pls

router123:
I hav used mesh b4. For each plot u need approx 3.5 mesh. Which is 60ft each. So for 40 plots u need abt 3.5 x 40 equals 140mesh needed. D last time I bought d quoted mesh of 8ft height it was 20k (dat was 2013 b4 d rise of dollar) remember u will buy galvanized pipes.
U can contact me on 08131360160 for guide. Am on whatsapp so feel free to beep me

So in 2013 to fence 40plots would have cost 2.8 million. Now it will be over double the price because of dollar rise.

router123:
I hav used mesh b4. For each plot u need approx 3.5 mesh. Which is 60ft each. So for 40 plots u need abt 3.5 x 40 equals 140mesh needed. D last time I bought d quoted mesh of 8ft height it was 20k (dat was 2013 b4 d rise of dollar) remember u will buy galvanized pipes.
U can contact me on 08131360160 for guide. Am on whatsapp so feel free to beep me

If one mesh is 60 feet long and the perimeter of 1 plot is 400ft, how can just 3.5 mesh of 60ft cover 1 plot?

60ft x 3.5 = 210ft

A plot measuring 100ft by 100ft is a square. When you add up all the sides that is 400ft.

Won't he need close to 7 sheets of mesh to cover 1 plot and 137 sheets of mesh to cover the entire 40 acres?

Please help me understand where I am wrong.

It's 40 plots not 40 acres. From your calculation then it will require 280 mesh of 60ft length to cover 40 plots of land.

makinde3:

Your whatsapp number pls

Same no. 08131360160

msogunro:


If one mesh is 60 feet long and the perimeter of 1 plot is 400ft, how can just 3.5 mesh of 60ft cover 1 plot?

60ft x 3.5 = 210ft

A plot measuring 100ft by 100ft is a square. When you add up all the sides that is 400ft.

Won't he need close to 7 sheets of mesh to cover 1 plot and 137 sheets of mesh to cover the entire 40 acres?

Please help me understand where I am wrong.

With all respect bros. he has 40 plot & not 4. Therefore if I add up wht u have isn't 400fts

msogunro:


If one mesh is 60 feet long and the perimeter of 1 plot is 400ft, how can just 3.5 mesh of 60ft cover 1 plot?

60ft x 3.5 = 210ft

A plot measuring 100ft by 100ft is a square. When you add up all the sides that is 400ft.

Won't he need close to 7 sheets of mesh to cover 1 plot and 137 sheets of mesh to cover the entire 40 acres?

Please help me understand where I am wrong.

I said 3.5 mesh for a 1 plot. & we have 40 plots. So it is 40 plots time 3.5mesh per plot.

But I hav seen my error
He actually need 6.5 mesh per plot.
Let me explain it dis way
Each plot has a side of 100ft

So u first put one mesh on each side. U have 4 mesh gone.
Then each side has uncovered part of 40ft on each side. Dat is 40ft x 4 sides. Which is 160.
So u need approx. 2.5 mesh to cover dat.
Therefore u have a total of 6.5mesh to a plot
To nw cover 40plots u have. 40 x 6.5. Equals 260

What's are these calculations for , the Op said 40 plots, is he going to fence it one after the other or fencing it just round??

MAAF:
It's 40 plots not 40 acres. From your calculation then it will require 280 mesh of 60ft length to cover 40 plots of land.

Sorry. I meant to write 40 PLOTS, not acres.

router123:

I said 3.5 mesh for a 1 plot. & we have 40 plots. So it is 40 plots time 3.5mesh per plot.
But I hav seen my error
He actually need 6.5 mesh per plot.
Let me explain it dis way
Each plot has a side of 100ft
So u first put one mesh on each side. U have 4 mesh gone.
Then each side has uncovered part of 40ft on each side. Dat is 40ft x 4 sides. Which is 160.
So u need approx. 2.5 mesh to cover dat.
Therefore u have a total of 6.5mesh to a plot
To nw cover 40plots u have. 40 x 6.5. Equals 260

Yes, you're write. In my calculations, I was fencing each side of each plot. There will be sides that you don't need to fence because they will be next to other plots.

I apologize for the confusion.

O ya, continue.

router123:


With all respect bros. he has 40 plot & not 4. Therefore if I add up wht u have isn't 400fts

Read what I wrote clearly bros. I said the perimeter length of 1 PLOT is 400 ft. Each plot size is 100 x 100.

MAAF:
Hello

I will like to know the length of mesh wire fence needed to fence 40 plots of land, with each Plot measuring 100ft/100ft. This is a whole lot of land to fence so We need accurate measurement before it is started.
Any candid suggestion is greatly appreciated.
Thanks.

Use moringa tree as perimeter fencing. I can handle it for you.