I used a neighbour's strong decoder to track consat signal. After successfully installing d consat, i returned d strong decoder to d owner only to b told that half of their multi tv channels are showing red. Initially i tot it was just a matter of blindscanning and maybe retracking d signal, but i discovered that when blindscanning, once it gets to freq 12500 and above, both d signal level n quality drops to below 29%. The only channels showing are d ones below freq 12400... Pls how do i get back d channels?

Trendy247:
I used a neighbour's strong decoder to track consat signal. After successfully installing d consat, i returned d strong decoder to d owner only to b told that half of their multi tv channels are showing red. Initially i tot it was just a matter of blindscanning and maybe retracking d signal, but i discovered that when blindscanning, once it gets to freq 12500 and above, both d signal level n quality drops to below 29%. The only channels showing are d ones below freq 12400... Pls how do i get back d channels?

check d disecq or lnb frequency

krasican:

check d disecq or lnb frequency

there's no diseq, its connected directly... Pls which one is d lnb freq?

Trendy247:

there's no diseq, its connected directly... Pls which one is d lnb freq?

check dish settings u will see lnb freq

krasican:

check dish settings u will see lnb freq

its 9750/10600

I solved it simply by putting off lnb power and putting it back on.

Modified: the problem started again the following day, pls how do i fix dis ish once n for all?

Pls if u had d same issue n u've been able to fix it, lets knw how u did it.

Trendy247:
Pls if u had d same issue n u've been able to fix it, lets knw how u did it.

I want to come to ur house to fix it for u. Are U staying in Benin city?

satelliteDISH:


I want to come to ur house to fix it for u. Are U staying in Benin city?

no, PH

Hello.I have the same problem few weeks ago.I thought it. Was signal .I finally fix it for those who don't know.the tp above still works.also the tp 11094 h 29999 and 11095 v 29999 still works.here is my new discovery.joy position has change.those using big dish may not notice coz its close.those using 60cm dish will definitely be affected.now climb up and use any of the tp I wrote above.now turn your dish to left a bit and raise up and down.you will hit green .just blind scan and all stations will come back.note left a bit.as you are turning left.be raising dish up and down.

tityboi:

Hello.I have the same problem few weeks ago.I thought it. Was signal .I finally fix it for those who don't know.the tp above still works.also the tp 11094 h 29999 and 11095 v 29999 still works.here is my new discovery.joy position has change.those using big dish may not notice coz its close.those using 60cm dish will definitely be affected.now climb up and use any of the tp I wrote above.now turn your dish to left a bit and raise up and down.you will hit green .just blind scan and all stations will come back.note left a bit.as you are turning left.be raising dish up and down.

ok tnx, but pls since u're now using 11095, could u pls confirm d exact freq of either GTV or TV3 lemme know

Trendy247:

ok tnx, but pls since u're now using 11095, could u pls confirm d exact freq of either GTV or TV3 lemme know

The 12525 tp still works.any of the tp still works. Only the position has changed.Just use one of them to track .shift your dish to left a bit and move up and down.put your lnb in 5pm .once you hit green. Just blind scan.all channels will come back

Trendy247:
Pls if u had d same issue n u've been able to fix it, lets knw how u did it.

my dear the position remains un changed,all you need do just climb up with your ladder and readjust the lnb skew till you get signal in 12525,thats all!

paulowas:

my dear the position remains un changed,all you need do just climb up with your ladder and readjust the lnb skew till you get signal in 12525,thats all!

tnx bro, but pls take a look at dis pic.. Once i input any freq above 12500, both d signal level n quality drops. Had it Been it was only d quality dat dropped, it would've been better because as it is, there is no amount of tweaking dat will make it green.

Trendy247:

tnx bro, but pls take a look at dis pic.. Once i input any freq above 12500, both d signal level n quality drops. Had it Been it was only d quality dat dropped, it would've been better because as it is, there is no amount of tweaking dat will make it green.

ok,just go to system setting of your receiver and factory set it,then scan your channels, it will work,if it did not work,i am afraid ,just know the tuner of the receiver is faulty!as its no longer strong enough pick higher frequencies,in this case just take it to a good repairer to fix it for you.

I have told you position has changes a bit.big dish not affected.move left a bit and up right to hit green