Rear view

We have 3 vents here. The middle is for the visitors toilets and the other 2 is each to one flat. Good mechanical vent system will make the house odorless and easy for services in due time.

dubemcapital:

Bamboo removing
Clearing all the wood
Leveling of the compound

You have done a very good work here. Bravo.

Hajji M.

mufutau55:


You have done a very good work here. Bravo.

Hajji M.

Thank you sir

An impressively neat job. Kudos.

Nigerian wire is still the best for now, here are the list of wire for the whole project :


1.5 mm G -- 8 coils
1.5 mm R -- 12 coils
1.5 mm B -- 8 coils
2.5 mm G --- 2 coils
" " R --- 8 coils
" " B --- 8 coils
4 mm. R -- 2 coils
" " B --- 2 coils
6mm. R -- 1/2 coil
" " B ---1/2 coil
10 mm R --- 1 coil
10 mm B --- 1coil
TV cable --- 2 coils

Totaling = (I will fill in once I consult record)

AreaFada2:
An impressively neat job. Kudos.

Thank you sir, I'm glad

We have different kinds of tiles and designs here.

40 by 40 --Ash-----83ctns Nig.( Parlour &room floor)
40 by 40 -- Berg----15ctns Nig. (Kitchen Floor )
25 by 40 -- 25700--94ctns " (kitchen wall)
25 by 40 -- 5003 -- 51ctns " (toilet wall)
25 by 40 -- 5005 -- 51ctns " (visitors toilet wall diff design)
30 by 30 -- Ash -----9ctns. " (toilet floor)
30 by 30 -- Indomie Berg 9ctns. " (toilet floor diff design)

All tiles are Nigerian made.
We are considering space tiling * it's economical and easy to maintain too

So first of all, the workers have to get the floor clean up, mix the mortar 14 headpan :1 bag of cement depending the size of the room or parlour

Followed by leveling the mortar / screeding the floor

And tile laying

Is either the spacing clip or nail. But I prefer 3"nail for tile spacing. Here we go

nice work, keep it up

Now watch this,


Tile has front, sides and back, and when all the tiles are not facing one direction they (the tiles) must not be uniformly in line. It will look like some are bigger with some centimeters.

However, behind the tile you will see an arrow, the arrow is meant to face one direction. Educate your tilers for excellent job if you want a very good tilling job because 99% of tilers don't know about this.

....

adewaleID:
nice work, keep it up

Thank you sir

dubemcapital:
Now watch this,
Tile has front, sides and back, and when all the tiles are not facing one direction they (the tiles) must not be uniformly in line. It will look like some are bigger with some centimeters.

However, behind the tile you will see an arrow, the arrow is meant to face one direction. Educate your tilers for excellent job if you want a very good tilling job because 99% of tilers don't know about this.

Thank you. Very educative. I never knew about the direction of the tiles laying imprinted on the tiles itself. Good one for the novice like me/us.

Hajji M.

dubemcapital:
OK, we have to move on... See details before that :

204 PCs of 1*12*12
85 PCs of 2*3*12
35pcs of 1*6*12
240 PCs of 15' bamboo
30 lgts of 16mm
100 lgts of 12mm
80 lgts of 10 mm
34 lgts of 8mm
Binding wire 25kg
93 bags of cement
3 trips of sharp sand
3trips of 1/2" aggregate

Electrical and mechanical fittings excluded

All labour cost #235, 000.00 only.


Dear Followers discretion is advised.... Let's move on please

Oga this labour cost seem small ooo. Is it for casters, Mason, plumber, iron fitters and the carpenter? Abeg what is the size of the deck?

dubemcapital:
OK, we have to move on... See details before that :

204 PCs of 1*12*12
85 PCs of 2*3*12
35pcs of 1*6*12
240 PCs of 15' bamboo
30 lgts of 16mm
100 lgts of 12mm
80 lgts of 10 mm
34 lgts of 8mm
Binding wire 25kg
93 bags of cement
3 trips of sharp sand
3trips of 1/2" aggregate

Electrical and mechanical fittings excluded

All labour cost #235, 000.00 only.


Dear Followers discretion is advised.... Let's move on please

Good job sir. Pls what is the size of this decking.

ceelog:



Oga this labour cost seem small ooo. Is it for casters, Mason, plumber, iron fitters and the carpenter? Abeg what is the size of the deck?

Yes the labour is for, cast workers, masons, carpenters Iron workers is 235,000 +50,000 for electrician and plumber (As at that stage not for the whole project)


That is just the labour no need to make up what is not (my belief anyway)


Please I will communicate the size of the deck soon I need to reconfirm that.

dubemcapital:



Yes the labour is for, cast workers, masons, carpenters Iron workers is 235,000 +50,000 for electrician and plumber (As at that stage not for the whole project)


That is just the labour no need to make up what is not (my belief anyway)


The size of the slab is

Please I will communicate the size of the deck soon I need to reconfirm that.

The size of the slab is : 8.016m by 16.946m or 26.3ft by 55.6ft

Your costing proves you are a trusthworthy builder. Goodmen are few and far. Keeping up the good work we are following

adewaleID:
Your costing proves you are a trusthworthy builder. Goodmen are few and far. Keeping up the good work we are following

Thank you sir, all thanks to God

More pics of the floor tile

OK, moving on to wall tilling now.

This tile is 25 by 40mm --- design code 5003

Because it has to be suspended on the wall with a light mortar till when it dry to glue to the wall parmernently, it needs to be so socked in water for 20mins or more in preparation for that.

We are done running the wire through conduit

Septic tank and Soak away.

Size : 12ft width by 17ft length by 14ft depth.

But will cut the soak away at 10ft then continue with the tank down to 14ft. Please stay with us.

Electrical finishing


Some will done now while some will be after the painting for a better results

Pvc ceiling is on, but not a good idea for a pvc ceiling to be fixed before wall tiles it should be the other way round.

Neat job.

Well done sir.

Thank you sir


Tile has front, sides and back, and when all the tiles are not facing one direction they (the tiles) must not be uniformly in line. It will look like some are bigger with some centimeters.

However, behind the tile you will see an arrow, the arrow is meant to face one direction. Educate your tilers for excellent job if you want a very good tilling job because 99% of tilers don't know about this.

[/quote]

Dieumerci:
Neat job.

Well done sir.

Thank you sir

buzzetin:
Thank you sir


Tile has front, sides and back, and when all the tiles are not facing one direction they (the tiles) must not be uniformly in line. It will look like some are bigger with some centimeters.

However, behind the tile you will see an arrow, the arrow is meant to face one direction. Educate your tilers for excellent job if you want a very good tilling job because 99% of tilers don't know about this.

You are welcome sir

dubemcapital:
Septic tank and Soak away.

Size : 12ft width by 17ft length by 14ft depth.

But will cut the soak away at 10ft then continue with the tank down to 14ft. Please stay with us.

Gud afternoon Sir,pls is it advisable to build a Soakaway/septic tank at the front of ones house that car can drive or park on top.My builder advice me to do it but am not too comfortable with it. Ur opinion will be appreciated... tanjs

Good work. Getting much better with neat and quality finishes. Keep it up.

Hello oga spyder,
I have a question regarding the cost of plastering two blocks of building consisting of 4 3-bed flats and a 4 1-bedroom flat in shimawa area ogun state. I just need a rough estimate of just labour cost.based on your vast experience.
Thank you.

spyder880:
Good work. Getting much better with neat and quality finishes. Keep it up.